multipath-tools-0.9.0+119+suse.308c007-150400.4.16.1<>,Fdnp9|c/GIe 2.RHzzu\)n\̠+M!|!SLQ/˫]iIw=REcZ:u zE>J#%¯b6BLCXڢ&%VIv3 Fa]@;~t[E~7 ;kx.c*s}%[g#05+Co.;z8wOhWZ&%go(D#),ˆ0ĩITܾE%EV>K/?/@/B/F/G0H0pI0X0Y0Z1<[1@\1X]1^3b4ec5d5e5f5l5u5v6 w9x9y:\=z;P;`<<< <GPL-2.0-onlyhttps://www.suse.com/System/Basehttp://christophe.varoqui.free.fr/linuxx86_64[ -f /.buildenv ] && exit 0 if [ -x /usr/bin/systemctl ]; then test -n "$FIRST_ARG" || FIRST_ARG="$1" [ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || : for service in multipathd.socket multipathd.service ; do sysv_service=${service%.*} if [ ! -e /usr/lib/systemd/system/$service ] && [ ! -e /etc/init.d/$sysv_service ]; then mkdir -p /run/systemd/rpm/needs-preset touch /run/systemd/rpm/needs-preset/$service elif [ -e /etc/init.d/$sysv_service ] && [ ! -e /var/lib/systemd/migrated/$sysv_service ]; then /usr/sbin/systemd-sysv-convert --save $sysv_service || : mkdir -p /run/systemd/rpm/needs-sysv-convert touch /run/systemd/rpm/needs-sysv-convert/$service fi done fi[ -f /.buildenv ] && exit 0 [ -z "${TRANSACTIONAL_UPDATE}" -a -x /usr/bin/systemd-tmpfiles ] && /usr/bin/systemd-tmpfiles --create /usr/lib/tmpfiles.d/multipath.conf || : if [ -x /usr/bin/systemctl ]; then test -n "$FIRST_ARG" || FIRST_ARG="$1" [ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || : if [ "$YAST_IS_RUNNING" != "instsys" ]; then /usr/bin/systemctl daemon-reload || : fi for service in multipathd.socket multipathd.service ; do sysv_service=${service%.*} if [ -e /run/systemd/rpm/needs-preset/$service ]; then /usr/bin/systemctl preset $service || : rm "/run/systemd/rpm/needs-preset/$service" || : elif [ -e /run/systemd/rpm/needs-sysv-convert/$service ]; then /usr/sbin/systemd-sysv-convert --apply $sysv_service || : rm "/run/systemd/rpm/needs-sysv-convert/$service" || : touch /var/lib/systemd/migrated/$sysv_service || : fi done fi if [ $1 -eq 1 ]; then [ ! -x /sbin/modprobe ] || /sbin/modprobe dm_multipath || true fi mkdir -p /run/regenerate-initrd/ touch /run/regenerate-initrd/all exit 0 test -n "$FIRST_ARG" || FIRST_ARG="$1" if [ "$FIRST_ARG" -eq 0 -a -x /usr/bin/systemctl ]; then # Package removal, not upgrade /usr/bin/systemctl --no-reload disable multipathd.service multipathd.socket || : ( test "$YAST_IS_RUNNING" = instsys && exit 0 test -f /etc/sysconfig/services -a \ -z "$DISABLE_STOP_ON_REMOVAL" && . /etc/sysconfig/services test "$DISABLE_STOP_ON_REMOVAL" = yes -o \ "$DISABLE_STOP_ON_REMOVAL" = 1 && exit 0 /usr/bin/systemctl stop multipathd.service multipathd.socket ) || : fi mkdir -p /run/regenerate-initrd/ touch /run/regenerate-initrd/all test -n "$FIRST_ARG" || FIRST_ARG="$1" if [ $1 -eq 0 ]; then # Package removal for service in multipathd.service ; do sysv_service="${service%.*}" rm -f "/var/lib/systemd/migrated/$sysv_service" || : done fi if [ -x /usr/bin/systemctl ]; then /usr/bin/systemctl daemon-reload || : fi if [ "$FIRST_ARG" -ge 1 ]; then # Package upgrade, not uninstall if [ -x /usr/bin/systemctl ]; then ( test "$YAST_IS_RUNNING" = instsys && exit 0 test -f /etc/sysconfig/services -a \ -z "$DISABLE_RESTART_ON_UPDATE" && . /etc/sysconfig/services test "$DISABLE_RESTART_ON_UPDATE" = yes -o \ "$DISABLE_RESTART_ON_UPDATE" = 1 && exit 0 /usr/bin/systemctl try-restart multipathd.service ) || : fi fi if [ $1 -eq 0 ]; then # Package removal for service in multipathd.socket ; do sysv_service="${service%.*}" rm -f "/var/lib/systemd/migrated/$sysv_service" || : done fi if [ -x /usr/bin/systemctl ]; then /usr/bin/systemctl daemon-reload || : fil`x`qf+"@FHf AA큤A큤A큤A큤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@rootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootrootmultipath-tools-0.9.0+119+suse.308c007-150400.4.16.1.src.rpmmultipath-toolsmultipath-tools(x86-64)@@@@   @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@     (kmod(dm_multipath.ko) if kernel)(kmod(scsi_dh_alua.ko) if kernel)(kmod(scsi_dh_emc.ko) if kernel)(kmod(scsi_dh_rdac.ko) if kernel)/bin/sh/bin/sh/bin/sh/bin/sh/bin/shcoreutilsdevice-mappergrepkpartxlibc.so.6()(64bit)libc.so.6(GLIBC_2.14)(64bit)libc.so.6(GLIBC_2.17)(64bit)libc.so.6(GLIBC_2.2.5)(64bit)libc.so.6(GLIBC_2.3)(64bit)libc.so.6(GLIBC_2.3.4)(64bit)libc.so.6(GLIBC_2.4)(64bit)libc.so.6(GLIBC_2.6)(64bit)libc.so.6(GLIBC_2.7)(64bit)libc.so.6(GLIBC_2.9)(64bit)libdevmapper.so.1.03()(64bit)libdevmapper.so.1.03(Base)(64bit)libdevmapper.so.1.03(DM_1_02_98)(64bit)libmpathcmd.so.0()(64bit)libmpathcmd.so.0(LIBMPATHCMD_1.0.0)(64bit)libmpathpersist.so.0()(64bit)libmpathpersist.so.0(LIBMPATHPERSIST_2.1.0)(64bit)libmpathpersist.so.0(__LIBMPATHPERSIST_INT_1.0.0)(64bit)libmultipath.so.0()(64bit)libmultipath.so.0(LIBMULTIPATH_15.0.0)(64bit)libmultipath.so.0(LIBMULTIPATH_15.0.1)(64bit)libpthread.so.0()(64bit)libpthread.so.0(GLIBC_2.2.5)(64bit)libpthread.so.0(GLIBC_2.3.2)(64bit)libpthread.so.0(GLIBC_2.3.3)(64bit)libsystemd.so.0()(64bit)libsystemd.so.0(LIBSYSTEMD_209)(64bit)libudev.so.1()(64bit)libudev.so.1(LIBUDEV_183)(64bit)liburcu.so.6()(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)rpmlib(RichDependencies)sg3_utilssuse-module-toolssystemdsystemdsystemdsystemd1.2.783.0.4-14.6.0-14.0-15.2-14.12.0-14.14.3d ddac@c6@c6@cbγbγb{@bzSby@bX bA@b @b bar@a+@a@aa@aI@a;Ha^a @`[`@`g@`e`e`S@`KW`H`#__$_cO_a@_a@_Z@_G@_FN_?@_>e^@^(@^^>@^>@^I^C^ P@]4@]o@]g@]-@]G@] ] \8\@\\\\\~d\~d\8@\5@\4\@\@\@[@[@[@[:[6@[0@[0@ZJ@ZJ@Z̧@Z̧@Z̧@Za@ZZZI@ZZZZZp^@Zk@ZaZ]@ZWQZtimeout for updating persistent reservations (gh#opensvc/multipath-tools#45) * libmultipath: is_path_valid(): check if device is in use (bsc#1203141) (added libmount dependency) * libmultipath: orphan paths if coalesce_paths frees newmp (bsc#1207546) * multipathd: handle no active paths in update_map_pr (bsc#1207546) * multipathd: make pr registration consistent (bsc#1207546) * multipath.conf(5): improve documentation of dev_loss_tmo (bsc#1207546) * libmpathpersist: fix command keyword ordering (bsc#1207546, bsc#1209345) * libmultipath: fix 'show paths format' failure * Use "queue_mode bio" for NVMeoF/TCP devices * minor upstream bug fixes * man page fixes * hwtable fixes * github workflow adaptations from Factory / SLE15-SP5- Fix "rpm --verify" (bsc#1207232)- Use %tmpfiles_create macro for tmpfiles.d file- Update to version 0.9.0+62+suse.3e048d4: * Fix multipathd authorization bypass and symlink attack (bsc#1202739 CVE-2022-41973 CVE-2022-41974) * add multipath-dracut.conf: dracut config file to install tmpfiles.d/multipath.conf in initramfs- Update to version 0.9.0+55+suse.33d8854: * Avoid linking to libreadline to avoid licensing issue (bsc#1202616)- Update to version 0.9.0+39+suse.51a2ab1: Upstream bug fixes: * libmultipath: fix find_multipaths_timeout for unknown hardware (boo#1201483) * multipath-tools: fix "multipath -ll" for Native NVME Multipath devices (boo#1201483)- Update to version 0.9.0+33+suse.fdc6686 * multipath.conf: add support for "protocol" subsection in "overrides" section to set certain config options by protocol. * Removed the previously deprecated options getuid_callout, config_dir, multipath_dir, pg_timeout * hwable fixes and additions * multipath.conf(5): add disclaimer about vendor support * libmultipath, kpartx: fix callers of dm_get_next_target() * Change built-in defaults for NVMe: group by prio, and immediate failback * Allow compilation with -D_FORTIFY_SOURCE=3- Update to version 0.8.9+90+suse.71a70fb: * support overriding -D_FORTIFY_SOURCE in OPTFLAGS * add -U_FORTIFY_SOURCE to optflags to avoid compilation errors on old distros- Update to version 0.8.9+87+suse.a1eb122: * add ability to autodetect support for -D_FORTIFY_SOURCE=3- Update to version 0.8.9+85+suse.a9da21c: * This is a pre-release of multipath-tools 0.9.0 * multipath.conf: add "protocol" subsection in "overrides" section This allows to set "dev_loss_tmo", "fast_io_fail_tmo", and "eh_deadline" on a per-protocol basis rather than per storage * multipath.conf: drop support for deprecated options: getuid_callout, pg_timeout, config_dir, multipath_dir * multipathd: don't switch to DAEMON_IDLE during startup (bsc#1199346, bsc#1197570) * multipathd: avoid delays during uevent processing (bsc#1199347) * Fixes for minor issues reported by coverity * Fix for memory leak with uid_attrs * Fix possibility to redefine -D_FORTIFY_SOURCE macro. * Updates for built in hardware db- Update to version 0.8.9+42+suse.45974f11: * Logging improvements * Fix busy loop with delayed_reconfigure (bsc#1199342) * multipathd: use remove_map_callback for delayed reconfigure * multipathd: Don't keep starting TUR threads, if they always hang. (bsc#1199345) * Fix handling of path addition in read-only arrays on NVMe * Updates of built-in hardware database - Update to upstream 0.8.9 * libmultipath: only warn once about unsupported dev_loss_tmo * Otherwise code-identical to 0.8.8+64- If multipath-tools is newly installed, load dm-multipath (bsc#1196898)- Update to version 0.8.8+64+suse.f265f7e0: * libmultipath: fix printing native nvme multipath topology (bsc#1196011) * libmultipath: add %L path wildcard for 64-bit hex LUN * libmultipath: support host adapter name lookup for s390x ccw bus- Update to version 0.8.8+60+suse.4c5922cb: * multipathd: add suppport for FC Fabric Performance Impact Notifications (FPIN) (bsc#1195506)- Version 0.8.8+57+suse.dfb672fe * kpartx.rules: skip MD devices (bsc#1195644) * libmultipath: hwtable: use ALUA for all LIO targets (bsc#1195649) * multipathd.service: drop ExecStartPre for loading dm-multipath (bsc#1195397)- Version 0.8.8+45+suse.628d603e * fix handling of historical-service-time path selector (bsc#1195425) * fix marking multipath devices as failed prematurely on startup (bsc#1195426) * multipathd.service: remove LimitCORE=infinity directive This should only be enabled for debugging. * multipathd.service: don't load scsi_dh modules (bsc#1195397) This is done via modules-load.d functionality on (open)SUSE - Upstream fixes: * Fix claiming of paths with "find_multipaths strict" * Avoid unnecessary read-only reloads- Version 0.8.8+13+suse.79c3556f * code-wise identical to 0.8.8+38+suse.2bdd3a14 (previous version number was too high by mistake)- Update to 0.8.8+38+suse.2bdd3a14.obscpio * upstream version bump. Code-wise identical to 0.8.7+138+suse.7c9afe31- Drop versioned dependency on libmpath0 again (bsc#1190622) * Since 0.8.6, libmultipath and libmpathpersist have got proper ABI versioning, and rpmbuild auto-generates dependencies on libmultipath.so.0(LIBMULTIPATH_13.0.0) etc.- Update to version 0.8.7+138+suse.7c9afe31: New upstream version (pre-0.8.8) * deprecate "config_dir" and "multipath_dir" config options (will be removed in future version) * remove dependency on systemd-udevd-settle.service (boo#1193336) * fix crash in remove_map (boo#1193334) * CLI: add path wildcard "%I" for init state * CLI: add "reconfigure all" command * allow multiple pending "reconfigure" commands (bsc#1189551) * speed up "reconfigure" by avoiding unnecessary map reloads (bsc#1189551) * rework of CLI command handler (unix socket handler) to avoid hanging CLI commands (bsc#1189551) * fix multipathd startup after stop during reconfigure (boo#1193338) * improve error detection and warning messages in config file parser * fix exit status of multipath -T (bsc#1191900) * fix defects reported by coverity (boo#1193342) - avoid sleeping with locks held - exit if bindings file is broken - set umask before mkstemp - add bounds and consistency checks in SCSI VPD parsing code * add hardware table entry for DellEMC/ME4 (PowerVault ME4)- Add a versioned dependency of multipath-tools on libmpath0 (bsc#1190622)- Update to version 0.8.7+14+suse.5a09bfa1: * Fix possible string overflows (bsc#1188148) - Upstream fixes / changes * better string handling * multipath: print warning if multipathd isn't running * mpathpersist: better error msg when no usable paths exist * fixes from 0.8.6+32+suse.f11c192 merged upstream- Spec file: remove compatibility code for SLE <= SLE15-SP2- Update to version 0.8.6+32+suse.f11c192: * libmultipath:fix compilation with glibc 2.34 (bsc#1189099) * libmultipath: avoid buffer size warning with systemd 240+ (bsc#1189176) * libmultipath: use uint64_t for sg_id.lun (bsc#1187534) - Upstream bug fixes: * multipath-tools: make HUAWEI/XSG1 config work with alua and multibus * multipath-tools: add info about HPE Alletra 6000 and 9000 * multipathd: cli_getprkey(): fix return value and "aptpl" support * multipathd: don't rescan_path on wwid change in uev_update_path * kpartx: Don't leak memory when getblock returns NULL * multipath: free vectors in configure * multipathd: fix ev_remove_path return code handling * multipathd: remove duplicate orphan_paths in flush_map * multipathd: don't fail to remove path once the map is removed * multipathd: fix compilation issue with liburcu < 0.8- install to /usr on Tumbleweed (boo#1029961)- Update to version 0.8.6+10+suse.47711374: * Github workflows: add CI for SUSE-specific branches- Disabled LTO for multipath-tools * The test for is_valid_path fails if LTO is enabled, just disabling it for %check is insufficient.- Update to version 0.8.6+9+suse.6c05a61: Update to upstream 0.8.6. * add eh_deadline option to avoid endless SCSI error handling * add wwid_recheck option to detect storage configuration changes * add library versioning for libmultipath, libmpathpersist etc. and to libmultipath plugins * move some global symbols to libmultipath (udev, logsink, etc) and provide default implementations for get_multipath_config() etc. This allows simplifiying libmpathpersist_example.c drastically. * fixes for shutdown issues and various race conditions on exit * improve cleanup on exit, fix memory leaks * add libmpathvalid library * fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081) * Avoid access to root FS while queueing IO (bsc#1178049, bsc#1181234) * lots of bug fixes, additions to built-in hardware table, and CI improvements (bsc#1186212) * kpartx: free loop device after listing partitions (boo#1107187) Bug fixes on top of 0.8.5 mentioned below are also included in this upstream version.- Update to version 0.8.5+30+suse.633836e: * multipathd: give up "add missing path" after multiple failures (bsc#1183963)- Update to version 0.8.5+29+suse.5dabcd2: * 11-dm-mpath.rules: run "multipath -U" with -v1 (bsc#1182871) * libmultipath: merge update_multipath_table() and update_multipath_status() (bsc#1183666)- Update to version 0.8.5+26+suse.2cbedfd: Avoid "illegal request" errors on non-RDAC storage (bsc#1182072, bsc#1177371)- Update to version 0.8.5+23+suse.c11b054: * multipath -U: reduce log level of "adding new path" message (bsc#1181435, bsc#1183666)- Update to version 0.8.5+22+suse.e1e3c48: * multipath-tools tests: fix stringop-overflow build errors with gcc 11 (bsc#1181877) * README moved to README.md (has been converted to markdown upstream)- Update to version 0.8.5+12+suse.3b0e9ca * libmultipath: force map reload if udev incomplete (bsc#1178662, bsc#1172157, bsc#1175454, bsc#1176406) - Fixes from upstream 0.8.5 * multipath-tools: add MacroSAN arrays to hwtable * libmultipath: Allow discovery of USB devices (add configuration option "allow_usb_devices")- Remove compatibility code for SLE <= 12-SP2 from spec file- Bugref for all minor fixes since SLE15-SP2 release (bsc#1176670) - Added README.alua- Update to version 0.8.4+192+suse.1bc10ad: * Fix handling of hardware properties for maps without paths (bsc#1176644)- Update to version 0.8.4+190+suse.fe234ea: * Fixes for daemon shutdown issues from SLE(bsc#1110060, bsc#1110439) - multipathd: allow shutdown during configure() * fix compilation of external programs with -lmultipath (bsc#1133957, necessary after the above fix) * Minor upstream fixes- Missing past changelog bug references: * 0.7.3+10+suse.70ccb55b0439: Patch series for NVMe discovery and failover (bsc#1038865, bsc#1057820) * 0.7.9+109+suse.203c1cf * setup_map: wait for pending path checkers to finish (bsc#1118224)- Update to version 0.8.4+183+suse.1817ce2: Added reviewed upstream fix for multipath crash * multipath: get_dm_mpvec: discard broken maps- Update to version 0.8.4+180+suse.50a2698: * Fix memory access / leak issues found with valgrind- Update to version 0.8.4+170+suse.801341f: * libmultipath: tests: fix bitfield tests * Spec file: disable LTO for %check (bsc#1133122)- Update to version 0.8.4+167+suse.70bef90: Pull in reviewed upstream changes - Bug fixes * libmultipath: add consistency check for alias settings (bsc#1172429) * libmultipath: select_action(): don't drop map if alias clashes (bsc#1172429) * libmultipath: refuse reloading an existing map with different WWID (bsc#1172429) * libmultipath: select_action(): force udev reload for uninitialized maps (bsc#1172157) * multipathd: uev_trigger(): handle incomplete ADD events (bsc#1172157) * improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064) * libmultipath: add device to hwtable.c (bsc#1174026) (ETERNUS AHB) - New features * multipath: add -D option to skip multipathd delegation * multipath: delegate flushing maps to multipathd * multipathd: add "del maps" multipathd command - Other changes * cleanup disassemble_map() code path (bsc#1178377, bsc#1178379) * multipath-tools: introduce INIT_REMOVED state * logging improvements * fix "multipathd show devices" * libmultipath: remove uevent listener failback * libmultipath: create bitfield abstraction * libmultipath: count pending paths as active on loads * kpartx: handle alternate bsd disklabel location - Lots of minor fixes and cleanups - Spec file: use %service_del_postun_without_restart macro- Update to version 0.8.4+43+suse.908383f: * enable negated regular expression syntax in conf file (bsc#1182917) * change default devnode blacklist to '!^(sd[a-z]|dasd[a-z]|nvme[0-9])'- Update to version 0.8.4+40+suse.b06c2e5a: - Fix udev rule processing during coldplug (bsc#1172157) * 11-dm-mpath.rules: Fix udev rule processing during coldplug - Fix compilation with gcc-10 * fix boolean value with json-c 0.14 * libmultipath: fix condlog NULL argument in uevent_get_env_var - Reviewed upstream changes: * simplify failed_wwid code * centralize path validation code - Use pkgconfig for BuildRequires- Update to version 0.8.4+31+suse.8f53764: * Fix sporadic build failures caused by missing build dependencies- Update to version 0.8.4+29+suse.c27ed8d: * multipath-tools: Makefile.inc: set -Wno-error=clobbered * Makefile.inc: keep warning flags during rpm build * Eliminate compiler warnings on 32bit build. * Fixes for tests under i586 - Spec file: add %check section to run multipath-tools CI * not on SLE12, as cmocka is missing * add build dependency on cmocka for building tests * run "make test" with parallel make- Update to version 0.8.4+19+suse.48fc2f4: * multipath: add "-e" option to enable foreign libraries * libmultipath: set "enable_foreign" to NONE by default * deleted libmultipath-set-enable_foreign-to-NONE-by-default.patch (included in factory git repo now). * Makefile: dependency fixes for parallel build - Get rid of %is_opensuse: * drop build workaround for Leap 42.1 * build libdmmp for everything except SLE12/Leap42 and older - Other spec file updates: * use %make_build to speed up build (possible with 0.8.4) - Migrated to .obscpio format.- Update to version 0.8.4+16+suse.f319f7ea - Changed github workflow back from merge-based to rebase-based. This makes it much easier to assess differences between upstream and SUSE code. * Use TAG_OFFSET in _service, as this is now possible again. - Reviewed upstream patches added: * kpartx.rules: fix handling of synthetic uevents (bsc#1161923) * libmpathpersist: limit PRIN allocation length to 8192 bytes (bsc#1165786) - Update upstream version to 0.8.4 * drop nr_active field, always count active paths (bsc#1125043) * kpartx: fix detection of dasd partition tables on loop devices (bsc#1139775) * directio path checker fixes * lots of fixes for compiler warnings, and cleanups * nvme: update to nvme-cli 1.9- Update to version 0.8.3+11+suse.7dcdf2f: * libmultipath: fix files read from config_dir (bsc#1162896)- Update to version 0.8.3+10+suse.86684b9: * libmultipath: fix compilation with -fno-common (boo#1160403)- Update to version 0.8.3+9+suse.f6f2a52 - Minor upstream improvements and bug fixes * libmultipath: EMC PowerMax NVMe device config- Update to version 0.8.2+27+suse.3ff280b: * Added upstream patch to fix premature path reinstantiation with san_path_err_XX (boo#1149319)- Update to version 0.8.2+26+suse.d884195: - Don't activate NVMe native multipath support by default * multipath.conf.5: document foreign library support * multipath.conf: add "enable_foreign" parameter (bsc#1139837) * Set default for "enable_foreign" to "NONE" (bsc#1139837) added libmultipath-set-enable_foreign-to-NONE-by-default.patch - Added reviewed upstream patches (marginal path patch set from Red Hat) * add "marginal_pathgroups" config option * deprecate "delay_wait_checks" and "delay_watch_checks"; they are now automatically mapped to eqivalent "san_path_err_..." settings.- Update to version 0.8.2+11+suse.0f6a649: * kpartx: recognize DASD on loop devices again (bsc#1139775) * Bump version to 0.8.2 - most changes were already in SUSE tree * Man page improvements (bsc#1148767)- Update to version 0.8.1+59+suse.f947184: * libmultipath: trigger uevents for partitions, too (bsc#1140146)- Update to version 0.8.1+58+suse.2af8f92: * libmultipath: more cautious blacklisting by missing property (don't blacklist paths because of temporarily missing udev properties) * libmultipath: fix memory leak with "uid_attrs" config option * libmultipath: get_uid: straighten the fallback logic - Fix SCSI VPD 0x80/0x83 parsing - Fix compiler warnings introduced by gcc 9: * -Wstringop-overflow, -Wstringop-truncation, - Waddress-of-packed-member- Update to version 0.8.1+28+suse.fea562a: * mpathpersist: optimize for setups with many LUNs (bsc#1134648) * mpathpersist: add option -f/--batch-file (bsc#1134648) * libmultipath: get_prio(): really don't reset prio for inaccessible paths (bsc#1118495) - Upstream bug fixes from dm-devel (bsc#1139369): * multipath: call store_pathinfo with DI_BLACKLIST * multipathd: fix REALLOC_REPLY with max length reply * libmultipath: make vector_foreach_slot_backwards work as expected * multipathd: fix client response for socket activation (bsc#1133861) * various minor fixes (coverity)- Disable kmod() style dependencies again (bsc#1119414) * For TW, dependencies will be autogenerated (gh#openSUSE/rpm-config-SUSE#3) * For SLE, feature is currently rejected (jsc#SLE-3853) - Update to version 0.8.1+8+suse.8c11498: * Avoid deadlock situation during udev settle (bsc#1131789, bsc#1125145) - multipath -u: test socket connection in non-blocking mode * Fix priority handling for offline paths (bsc#1118495) - Update to upstream 0.8.1 (bsc#1148767) * Avoid device IO in "multipath -u" (bsc#1125145) * multipathd: protect all access to running_state (bsc##1110060, bsc#1110439) * Improve handling of changed WWIDs and temporary failure to obtain WWID. Option "disable_changed_wwids" is now ignored. (bsc#1184260) * Fixes for PATH_PENDING state handling (bsc#1125043) * libmultipath: hwtable: add Lenovo DE series (bsc#1125507)- Trim %if..%endif guards that do not affect the build result. - Combine %service_* calls to reduce generated code. - Make use of %make_install.- Re-enable kmod-style dependencies for multipath-tools package (bsc#1119414) - Separate out libmpath0 (bsc#1119414) - Spec file improvements * Add Conflicts: for older multipath-tools to libmpath0 * Move license files to the libmpath0 package, which contains the code with complex licensing. The executables are GPL-2.0 anyway. * Remove bogus dependency of -devel package on device-mapper * -devel package depends on libmpath0, not multipath-tools * Remove %dir %{_defaultlicensedir} for SLE12-SP3 and newer (John Vandenberg ) * Remove unused /var/cache/multipath directory * Remove check for multipath maps in %pre and %post * Remove SLE11-specific multipathd service stop / start from %pre / %post * Remove obsolete tools from package description (bsc#1129827) * Add -n to %service_del_{pre,post}un for multipathd.socket- Update to version 0.8.0+17+suse.a28893f: * Code-identical to 0.7.9+139+suse.ed9d450, except for new version number - Disable kmod() style dependencies for now, as they are causing problems with image builds (bsc#1119414). They'd been active for SLE15-SP1 only, anyway. - _service: determine "tag offset" manually, the patch count determined by git is far too high.- Fix module name in multipath.conf (bsc#1119414) * The modules-load.d entry must match the filename exactly- Update to version 0.7.9+139+suse.ed9d450: * multipath-tools: Build: properly parse systemd's version- Add kmod(xyz) style dependencies for SLE15-SP1 (jsc#SLE-3853, fate#326579, bsc#1119414)- Update to version 0.7.9+138+suse.0edd0a2: - Include reviewed fixes from upstream * libmutipath: continue to use old state on PATH_PENDING * libmultipath: disable user_friendly_names for NetApp * multipath: blacklist zram devices * various fixes for martinal path code - Bug fixes: * multipathd: Fix miscounting active paths (bsc#1125043) * multipathd: avoid null pointer dereference in LOG_MSG (bsc#1127873) * minor fixes suggested by coverity (bsc#1127879)- Add BuildRequires on suse-module-tools * we need it for regenerate_initrd_posttrans- Update to version 0.7.9+111+suse.b4232b7: - merged upstream cb4a979a (SUSE bug fixes merged upstream, code-identical to previous release).- Update to version 0.7.9+109+suse.203c1cf: * multipathd: avoid crash in cli_list_path (bsc#1121134) * libmultipath: fix compilation with older kernel headers (bsc#1121066) - merged upstream fb824725 * Improved NVMe support in both native and dm-mpath mode added basic NVMe ANA support (bsc#1119898, bsc#1118495) * Fix prio output in "multipathd show topology" (bsc#1119897) * multipathd: fix daemon not really shutdown (bsc##1110060, bsc#1110439)- Update to version 0.7.9+90+suse.f81e290: * libmultipath: Increase SERIAL_SIZE to 128 bytes (bsc#1107179)- Update to version 0.7.9+89+suse.df77b66: - re-enable "san_path_err_xy" options These have been removed upstream, but they were supported in SLE-15/Leap15.0, so we can't simply throw them away. Improve documentation, mark them as deprecated, but keep the code in place.- Update to version 0.7.9+85+suse.766b95e: * upstream patch series to make verbosity level 3 less verbose and thus better usable (bsc#1118937) * fix for handling device size mismatch in coalesce_paths() (bsc#1037379) * libmultipath: fix false removes in dmevents polling code (bsc#1116272) * Spec file: remove build dependency on dracut which causes build errors for some distributions- Update to version 0.7.9+58+suse.0790830: * libmpathpersist: fix off-by-one error in PRIN length check (bsc#1099007) * multipathd: fix mpp->hwe handling when paths are freed (fix possible crash caused by new hardware table code)- Update to version 0.7.9+55+suse.9fc8439: (note the "55" is due to former merge operations. We actually only have 7 patches on top of upstream. All other patches referenced below as "not upstream" have been merged). * Bump version to 0.7.9 * multipathd: reset delay_wait_checks counter on failure (bsc#1114771) * multipathd: fix irritating "minor number mismatch" message (bsc#1111116) * fix possible failure to shut down (bsc#1110060, bsc#1110439) * upstream "checker overhaul" - cleanups and improvements for path checkers * Upstream fixes for failures handling path initializiation * various small upstream bug fixes.- Update to version 0.7.7+136+suse.19bb285: Bug fixes from upstream, and SUSE bug fixes * multipathd: try SCSI persistent reservations for SCSI only (bsc#1108875) * libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458) * libmultipath: Fixup updating paths (bsc#1110418) * multipathd: fix memory leak on error in configure (bsc#1110418) * multipathd: minor fixes (bsc#1110418) * multipathd: function return value tweaks (bsc#1110418) * multipath: fix max array size in print_cmd_valid (bsc#1110418) * libmutipath: don't use malformed uevents (bsc#1110418) * libmultipath: fix null dereference int alloc_path_group (bsc#1110418) * libmultipath: fix memory issue in path_latency prio (bsc#1110418) * libmultipath: fix length issues in get_vpd_sgio (bsc#1110418) * multipathd: decrease log level of uevent messages (bsc#1110586) * multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587) * libmultipath: pathinfo: skip hidden devices (bsc#1110586) * libmultipath: nvme: shorter topology output (bsc#1082419) * libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112) * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007) * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220) * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036) * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036) * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036) * libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007) * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007) * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007) - Update to upstream 1a8625abd (0.7.7+82) * minor fixes for kpartx, found by coverity * mpathpersist: add --param-alltgpt option * libmultipath: add "protocol" blacklist option. * multipathd: add new wildcard "%P" for "protocol" * multipath-tools: fix products names in hwtable * libmultipath: more debug output in alua prioritizer (bsc#1080965) * libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION (bsc#1080965) * libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965)- Update to version 0.7.7+75+suse.6287aef: Added minor updates from upstream * multipath-tools: add info about how to enable ALUA in ONTAP * multipath-tools: add directio path_checker for DASD devices * multipath-tools: make Product Name mandatory and add all of them Minor rebase, as some SUSE patches have been merged upstream (all mentioned in previous changelogs)- Update to version 0.7.7+72+suse.4b24466: * multipath: fix return code handling in delegate_to_multipathd (bsc#1098177) * multipath: don't start multipathd unnecessarily (bsc#1098177)- Update to version 0.7.7+70+suse.4a5941e: * libmultipath: change partition_delimiter default to "-part" (bsc#1073622, bsc#1056526) * change default for find_multipaths to "greedy" (bsc#1099054) * libmultipath: allow distributions to change partition_delim default (bsc#1073622, bsc#1056526)- Update to version 0.7.7+67+suse.a7d1e14: - RBD/RADOS backend support has been removed upstream remove support for it in SUSE, too (boo#1099037, FATE#826853) * added Obsoletes: for multipath-tools-rbd. - libdmmp version has changed to 0.2.0 - New patches not yet upstream: (Wed Jun 12 2018: these are now upstream, since 0.7.8) * multipathd: fix mpp->hwe handling on path removal (boo#1099028) * libmultipath: print correct default for delay_*_checks (boo#1099026, bsc#1110418) * libmultipath: avoid error messages from RDAC check (bsc#1108728, bsc#1075539) * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220) * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036) * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036) * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036) * libmpathpersist: fix stack overflow in mpath_format_readfullstatus() (bsc#1099007) * multipathd: fix buffer size in cli_getprkey (bsc#1099028) * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007) * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007) * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007) - SUSE specific patches preserved: * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828) * kpartx: create symlinks for dmraid devices (bsc#1064212) * multipath.conf.5: document no_partitons compat support (fate#323406) * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406) * Added fossology assessment as README.licenses (bsc#1088801) - Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0): * libmultipath: don't [un]set queue_if_no_path after domap obsoleted by "libmultipath: cleanup features handling code" * multipath.rules: use -i flag to multipath obsoleted by path detection patch series * libmpathpersist: add support for prkeys file v3 obsoleted by "mpathpersist: Fix invalid condition check" * libmultipath: fix deadlock in tur.c obsoleted by "libmultipath: fix tur checker locking" * checkers/rbd: missing pthread_lock() on failure path obsolete because of RBD removal * libmultipath/hwtable: don't hard-code ALUA for IBM IPR obsoleted by "libmultipath: hwhandler auto-detection for ALUA" and "libmultipath: don't reject maps with undefined prio" (bsc#1085212, bsc#1075129) - Update to upstream version 0.7.7+50 (39ad8dc8) - rework of "find_multipaths" logic * find_multipaths can now be "strict", "yes", "no", "greedy", or "smart" * SUSE default is "greedy" for now, consistent with previous behavior * "multipath -u -i" not necessary in udev rules any more (removed SUSE patch "multipath.rules: use -i flag to multipath") - patch series for config file handling (bsc#1067789): * fix inconsistent handling of multiple config file entries matching the same device (bsc#1067789) * multipath: implement "multipath -T" (bsc#1067789) * multipathd: implement "show config local" (bsc#1067789) * libmultipath: merge "multipath" config sections by wwid * multipathd: add path format wildcard "%0" for failures * libmultipath: config parser: Allow '"' in strings - multipath-tools: foreign/NVME implementation (bsc#1082419) for native NVME multipath configurations - Other new upstream features: * mpathpersist: add all_tg_pt option * add polling dmevent handler (only one thread waiting for device-mapper events rather than one per map). * multipath: add "ghost_delay" parameter * "marginal path" path state checking for better handling of unstable "shaky" connections in a SAN. conf options "marginal_path_err_rate_threshold" etc, see man page. This replaces the previous "san_path_err_threshold" functionality. - Upstream bug fixes: * Man page corrections and improvements for multipath.conf(5) * libmultipath: fix memory leak in process_config_dir() (bsc#1110352) * multipath: don't check timestamps without a path * multipathd: handle errors in uxlsnr as fatal (bsc#1086025) * libmultipath: don't reject maps with undefined prio (bsc#1085212, bsc#1075129) * multipathd: fix reservation_key check (bsc#1099008) * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug (bsc#1084748) * libmultipath: hwhandler auto-detection for ALUA (bsc#1085212, bsc#1075129) * multipath: fix rcu thread cancellation hang (bsc#1110418) * multipathd: register threads that use rcu calls (bsc#1110418) * multipathd: fix waiter thread cancelling * multipathd: use nanosleep for strict timing (avoids possible races with SIGALRM) * logging fixes: * libmultipath: fix log_pthread processing * libmultipath: set dm_conf_verbosity * libmultipath: fix basenamecpy * libmultipath: uev_update_path: update path properties * libmultipath: uev_update_path: always warn if WWID changed * libmultipath: get_uid: don't quit prematurely without udev (bsc#1108728) * libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728) * libmultipath: fix wrong output of "multipath -t" * Introduce the libmultipath/unaligned.h header file (bsc#1099036) * libmultipath: Fix sgio_get_vpd() (bsc#1099484) * kpartx: Improve reliability of find_loop_by_file() * libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is '\0'-terminated * libmultipath: enable feature disable changed wwid by default * multipathd: add lock protection for cli_list_status * bug fixes for "marginal path checker" * multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439, bsc#1086025) * multipath-tools: add INSPUR/MCS to hardware table * multipath-tools: add RDAC SUN/ArrayStorage to hwtable * multipath-tools: remove DF arrays from HP * multipath: print sysfs state in fast list mode (bsc#1110354) * multipathd: remove coalesce_paths from ev_add_map * multipath: fix DEF_TIMEOUT use * libmultipath: fix tur checker locking * multipath-tools: handle exit signal immediately (bsc#1086025) * multipathd: release uxsocket and resource when cancel thread (bsc#1110355) * path latency prioritizer fixes * multipathd.service: set TasksMax=infinity (bsc#1060616) * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427) * multipathd.socket: add WantedBy=sockets.target * kpartx.rules: fix by-id/scsi-* for user_friendly_names * multipath -C: decrease log level * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe * libmultipath: hwtable: multibus for NetApp NVMe-FC * libmultipath: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241) * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949) * libmultipath: condlog: log to stderr (bsc#1055949) * multipath: delegate dangerous commands to multipathdd (bsc#1047639) * libmultipath: don't try to set hwhandler if it is retained (bsc#1047639) * libmultipath: don't update path queueing on reload * multipathd: marginal path code fixes * multipath: check failed path dmstate in check_path * multipathd: clean up set_no_path_retry * multipathd: fix device creation issues * libmultipath: cleanup features handling code * multipath: fix hwhandler check in select_action * kpartx: don't delete partitions from partitions * limbultipath: prefer RDAC checker with detect_checker * multipath-tools: add AccelStor/NeoSapphire to hardware table * multipath-tools: add TMS/RamSan to hardware table * multipath-tools: add XIV/NEXTRA to hardware table * multipath-tools: add XIOtech/Magnitude to hardware table * libmultipath: ensure checker->fd == -1 if not set- Update to version 0.7.3+69+suse.218a0d0: * multipath -ll: print foreign maps only with "-o" flag (bsc#1089353) * Revert "disable nvme foreign library"- Update to version 0.7.3+67+suse.8f0c27b: * disable nvme foreign library (bsc#1089353)- No functional changes - Fixed rpmlint warnings (bsc#1088946) * multipath-tools-devel: moved .so files to /usr/lib[64] * added version dependencies for -devel packages- No functional changes * fixed SPDX syntax (and -> AND) * added /usr/share/licenses- No functional changes, just licenses - Spec file: fix %license tags and info after closer inspection (bsc#1088801) * kpartx is under GPL-2.0-only * rbd is under LGPL-2.1-only - Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801) * Added fossology assessment as README.licenses * multipath-tools: create LICENSES dir with the text of all used licences- Update to version 0.7.3+61+suse.d4d0494: * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug (bsc#1084748)- Fixed license tags in spec file * multipath tools / libmultipath is GPL-2.0-only * libmpathcmd is LGPL-2.0-or-later * libdmmp is GPL-3.0-or-later * adopt SPDX format.- Update to version 0.7.3+60+suse.46ac839: * libmultipath/hwtable: don't hard-code ALUA for IBM IPR (bsc#1085212, bsc#1075129)- Update to version 0.7.3+59+suse.1b6191c26774: * libmultipath: don't reject maps with undefined prio (bsc#1085212, bsc#1075129) * multipathd: handle errors in uxlsnr as fatal (bsc#1086025)- Update to version 0.7.3+57+suse.bb6be4c8b4ca: * multipathd: fix signal blocking logic (bsc#1086025) * multipath-tools: handle exit signal immediately (bsc#1086025) * multipath: fix DEF_TIMEOUT use (bsc#1086014) * multipath-tools: foreign/NVME implementation v2 (upstream accepted) (bsc#1082419)- Update to version 0.7.3+53+suse.140f4937e9e7: * libmultipath: fix wrong output of "multipath -t" (bsc#1082835)- Update to version 0.7.3+52+suse.08a969b7fce0: - Add limited support for displaying native NVMe multipath (bsc#1082419) * libmultipath: foreign/nvme: implement path display * multipathd: use foreign API * multipath: use foreign API * libmultipath/foreign: nvme foreign library * libmultipath/print: add "%G - foreign" wildcard * libmultipath: API for foreign multipath handling * libmultipath: print: use generic API for get_x_layout() * libmultipath: print: convert API to generic data type * libmultipath: "generic multipath" interface * libmultipath: add vector_convert() * libmultipath: add vector_free_const() * libmultipath: get rid of selector "hack" in print.c - Fix locking errors detected by coverity check (bsc#1082418) * checkers/rbd: missing pthread_lock() on failure path * libmultipath: fix deadlock in tur.c- Fix whitespace in dracut conf file (bsc#1080562)- Update to version 0.7.3+38+suse.a16beed5280a: * kpartx: don't delete partitions from partitions (bsc#1078362) * hwtable: add latest updates (bsc#1078363) * multipathd.service: set TasksMax=infinity (bsc#1060616)- Update to version 0.7.3+31+suse.6804bb73f72d: * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe (bsc#1073319)- Update to version 0.7.3+30+suse.6b5ed839: * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828) * libmultipath: ignore natively multipathed NVME devices (bsc#1076828) * multipath.rules: handle NVME devices (bsc#1076828) * FIX "libmultipath: hwtable: multibus for NetApp NVMe-FC" (bsc#1073319) * libmultipath: increase path product_id/rev field size for NVMe (bsc#1073319)- Update to version 0.7.3+25+suse.7c9920e2: * assemble_map: no newline at end of params string (bsc#1072253)- Update to version 0.7.3+24+suse.703a61d5: * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427) * libmultipath: hwtable: multibus for NetApp NVMe-FC (bsc#1073319) * libmultipath/propsel: select ALUA prioritizer for RDAC arrays only (bsc#1075539, bsc#1081241) * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949) * libmultipath: sgio_get_vpd: add page argument (bsc#1055949) * libmultipath: fix return code of sgio_get_vpd() (bsc#1055949)- Update to version 0.7.3+19+suse.0fd18bdd: * multipathd.socket: add WantedBy=sockets.target (bsc#1072253)- Update to version 0.7.3+18+suse.8c97f433: * multipath -C: decrease log level (bsc#1072504)- Update to version 0.7.3+17+suse.cac42e6f: * test-kpartx: add test for mapping without UUID (bsc#1074013)- Update to version 0.7.3+15+suse.570d5938: * kpartx.rules: fix by-id/scsi-* for user_friendly_names (bsc#1066893)- Update to version 0.7.3+14+suse.da06e7f3: * libmultipath: fix return code of sysfs_get_timeout (bsc#1069037)- added sample code for libmpathpersist (bsc#1066376) * added libmpathpersist-example.c - multipath-tools.spec: package libmultipath.so symlink in -devel package (bsc#1066376). We *do not* package header files for libmultipath, as the APIs are not public.- multipath-tools.spec: package *.so symlinks in -devel pkgs (bsc#1066376) - multipath-tools.spec: SLE15: add RADOS support for s390x (bsc#1066380) - Fix build error for targets SLE_12, SLE_12_SP1 (bsc#1066392)- Update to version 0.7.3+13+suse.db431514080f: * kpartx: create symlinks for dmraid devices (bsc#1064212) * limbultipath: prefer RDAC checker with detect_checker (bsc#1055949)- Update to version 0.7.3+11+suse.4de08d96: * libmultipath: condlog: log to stderr (bsc#1063059)- Update to version 0.7.3+10+suse.70ccb55b0439: - Rebase to upstream release 0.7.3 * libmultipath: add pthread_cleanup hook for udev monitor * libmultipath: pull functions into util.c * libmultipath: change reservation_key to a be64 * libmpathpersist: fix update_prflag code * multipath: add alternate reservation_key method * mpathpersist: add support for prkeys file * multipath-tools: minor edition and corrections in multipath.conf.5 * multipath-tools: fix incorrect length for strncmp in uevent.c * multipath-tools: clarify how to dump the multipathd config * multipath-tools: replace "setting: array" with "setting: storage device" at multipath output * libmultipath: sanitize fd handling * multipath-tools: link internal libraries before foreigns * multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable * multipath-tools: add support for all arrays from Sun StorEdge 3000 family * multipath-tools: add Xiotech iglu blaze arrays to hwtable * multipath-tools: add Dot Hill/Seagate arrays to hwtable * libmultipath: update INFINIDAT builtin config * multipath-tools: add info about adding new hardware * multipath-tools: Remove the limitation of IPC command reply length. * multipath-tools: libdmmp: Improve timeout mechanism * multipath-tools: libdmmp: New function to flush and reconfig * Bump version to 0.7.3 - minor fixes for upstream 0.7.3 * libmultipath: ensure checker->fd == -1 if not set * libmpathpersist: add support for prkeys file v3 * multipath: add man page info for my prkey changes - Patch series for NVMe discovery and failover (bsc#1038865) * discovery: sanitize NVMe discovery * libmultipath/discovery: modify NVMe path states * Add 'none' checker * hwtable: set 'none' as default checker for NVMe- Update to version 0.7.2+49+suse.993a29b1188d: * Revert "11-dm-mpath.rules: Remember DM_ACTIVATION" (boo#1059227) * Revert "11-dm-mpath.rules: don't set READY->ACTIVATION" (boo#1059227) * multipath: delegate using libmpathcmd (bsc#1047639)- split off rados support into separate multipath-tools-rbd package. This avoids pulling in the whole rados/ibverbs/rdma stack with multipath-tools. (bsc#1058504). - multipath-tools-rbd is Recommended but not Required by multipath-tools.- Update to version 0.7.2+44.3a8d750c: Misc bug fixes: * multipathd: don't flood system with sd_notify calls (bsc#1056011) * libmultipath: add_feature: skip pointless NULL check (bsc#1055635) * libmultipath: add_feature: allow only 1 feature (bsc#1055635) * multipath: delegate dangerous commands to multipathd (bsc#1047639) * libmultipath: fix partition_delimiter config option (bsc#1056526) * kpartx: helper functions for name and uuid generation (bsc#1056508) * kpartx: search partitions by UUID, and rename (bsc#1056508) * kpartx: fix a corner case when renaming partitions (bsc#1056508) * kpartx: -d must work with empty partition table (boo#1056599) * kpartx: only recognize dasd part table on DASD (boo#1056599) Rework of the udev rules related to multipath and kpartx (bsc#1054363): * libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation * libmultipath: add get_udev_device * libmultipath: get_refwwid: use get_udev_device * libmultipath: use const char* in some dm helpers * libmultipath: add DI_NOIO flag for pathinfo * libmultipath: add dm_get_multipath * multipath: implement "check usable paths" (-C/-U) * 11-dm-mpath.rules: multipath -U for READY check * 11-dm-mpath.rules: import more ID_FS_xxx vars from db * 11-dm-mpath.rules: no need to test before IMPORT * 11-dm-mpath.rules: handle new maps with READY==0 * 11-dm-mpath.rules: don't set READY->ACTIVATION * 11-dm-mpath.rules: Remember DM_ACTIVATION * multipath.rules: set ID_FS_TYPE to "mpath_member" * kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG * kpartx.rules: improved logic for by-uuid and by-label links * kpartx.rules: create by-partuuid and by-partlabel symlinks * kpartx.rules: generate type-name links only for multipath devices * kpartx.rules: fix logic for adding partitions * multipath/kpartx rules: avoid superfluous scanning * kpartx/del-part-nodes.rules: new udev file * kpartx.rules: move symlink code to other files - multipath-tools.spec: * added 68-del-part-nodes.rules to support partition deletion * added 00-dont-del-part-nodes.rules to disable partition deletion by default on openSUSE/SLES for now. * added 11-dm-parts.rules to kpartx package * added dracut.conf file to make sure 11-dm-parts.rules is included in initrd- Update to version 0.7.2+14+suse.5721c345: * cli_add_map: Use CMD_NONE (bsc#1053515) * multipath-tools: link internal libraries before foreigns (bsc#1028132) * multipathd daemon: Fix incorrect use of CLOCK_MONOTONIC in pthread (bsc#1053757)- Update to version 0.7.2+11+suse.448921a2: * multipath.conf.5: document no_partitions compat support * libmultipath: fixup compat support for 'features "1 no_partitions"'- Dropped 67-kpartx-compat.rules (SUSE legacy). * symlinks "/dev/mapper/${UUID}_part${X}" are not created any more, only "/dev/mapper/${UUID}-part${X}" (with "minus") - Dropped automatic kpartx invocation on dmraid devices (fate#323743) - Rebase to upstream multipath-tools 0.7.2: * libmultipath: retain_attached_hw_handler obsolete with 4.3+ * multipath-tools: move up TEMPLATE in hwtable * multipath-tools: delete libdmmp/docs/man directory in make clean * libmultipath: fix unit to seconds in log message for checker timeout * multipath-tools: add HPE StoreVirtual 3200 family to hwtable * multipath-tools: add HPE MSA 2050/2052 to hwtable * multipath-tools: add/change fujitsu arrays * multipath-tools: check sysfs path state for NVMe/NVMf * multipath-tools: sync third-party headers with 3.13 upstream * multipath-tools: beautify path_latency.c code * multipath-tools: fix format in multipath.conf.5 * libmultipath: update 3PARdata builtin config * Bump version to 0.7.2 - Update to version 0.7.2+8+suse.95e8f43e: * libmultipath: don't try to set hwhandler if it is retained (bsc#1037533) * libmultipath: don't [un]set queue_if_no_path after domap * kpartx/devmapper.h: remove dm_no_partitions * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406) * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG (bsc#1047180) * kpartx.rules: Use DM_ACTIVATION as condition (fate#323406) * kpartx.rules: skip creating by-uuid and by-label links (fate#32340)- Update to version 0.7.1+69+suse.3bfa5af1: * Merge branch 'sles12-sp3-fixes' into sles12-sp3 * libmultipath: get_udev_uid: make sure pp->wwid is 0-terminated (bsc#1048146) * libmultipath: drop uevent_can_discard_by_devpath (bsc#1048052) * libmultipath: only listen for uevents with DEVTYPE=disk (bsc#1048052) * libmultipath: fix over-long NVME WWIDs (bsc#1048146)- Update to version 0.7.1+64+suse.aabe8c87: * Updated "no_path_retry" patchset to v4 (minor change) * kpartx.rules: Fix syntax error in skip_kpartx code (bsc#1046092) - _service: use "match-tag" to refer only to offical tags- Update to version 0.7.1+62+suse.62a2c36e: * kpartx: only check for 'no_partitions' feature on dm devices (bsc#1037533) * Revert "kpartx: use mapname if no uuid is present" (bsc#1037533, bsc#1033541) - "no_path_retry" patch series (bsc#1043027) * libmultipath: load_config: skip setting unnecessary defaults * libmultipath: add/remove_feature: use const char* for feature * libmultipath: clarify option conflicts for "features" * libmultipath: merge_hwe: fix queue_if_no_path logic * libmultipath: assemble_map: fix queue_if_no_path logic * multipath.conf.5: document no_path_retry vs. queue_if_no_path * multipath.conf.5: Remove ??? and other minor fixes * libmultipath: add deprecated warning for some features settings - _service: Use "sles12-sp3" branch as revision, as factory and SLE12-SP3 submissions are in sync. Will be changed when factory forks off (latest at SLE12-SP3 GA).- set KBUILD_BUILD_TIMESTAMP to generate reproducible man-pages to fix build-compare (bsc#1045111)- Update to version 0.7.1+53+suse.07c2f6ac - kpartx patch series from upstream (bsc#1037533, bsc#1033541) * kpartx: only check for 'no_partitions' feature on dm devices * kpartx: test-kpartx: new unit test program * kpartx: remove is_loop_device * kpartx: relax and improve UUID check in dm_compare_uuid * kpartx: dm_remove_partmaps: support non-dm devices * kpartx: dm_devn: return error for non-existent device * kpartx: don't treat multi-linear mappings as partitions * libmultipath: don't treat multi-linear mappings as partitions * kpartx: use partition UUID for non-DM devices * kpartx: use absolute path for regular files * kpartx: find_loop_by_file: use sysfs * kpartx: include sys/sysmacros.h * Revert "kpartx: relax check when checking for a kpartx device" - Spec file: use new build flag for libdmmp installation (bsc#1036652), enabled by upstream fix: * libdmmp: enable library installation in alternative directory - Other bug fixes from upstream: * libmultipath: print.c: make sure lines are 0-terminated (bsc#1038865) * multipath-tools: fix compilation with gcc < 4.9 * kpartx: fix device checks * mpath_persist: Don't join threads that don't exist * libmultipath: fix suspended devs from failed reloads * mpathpersist: fix one more crash possiblity - Minor upstream changes: * multipath: Merge the DELL MD3xxx device configs * multipath: fix up position independent code * libmultipath: fix partition detection (bsc#1037533) * kpartx: default to running in sync mode * libmultipath: force udev reloads * libmultipath: print alias with no_path_retry message * multipathd: force reload device on all resizes * libmultipath: refactor calls to get dm device info * multipath-tools: document uid_attribute for NVME devices * Makefile: Remove assignments to unused variables * libmultipath/configure.h: Add a forward declaration * libmpathpersist: Add two missing #include directives * Remove mpath_reverse_8bytes_order() * Move the declaration of mpath_mx_alloc_len to a header file * Remove a superfluous "extern" keyword * mpathpersist.8: add missing documentation for -K, -C, -l- spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271) - spec file: Move libdmmp to /usr/lib[64] (bsc#1036652) - Update to version 0.7.1+7+suse.3edc5f7d: * kpartx: use mapname if no uuid is present (bsc#1033541) * kpartx: relax check when checking for a kpartx device (bsc#1033541) * libmpathpersist: use extern struct udev (bsc#1027188) * kpartx: include sys/sysmacros.h (fix compilation warning) - Update to upstream version 0.7.1: * multipath-tools: improve processing efficiency for addition and deletion of multipath devices * uevent_can_discard: optimize devpath check * multipathd: fix SIGUSR2 handling * multipath-tools: clean up libdmmp/Makefile * multipath-tools: libdmmp: Fix incorrect use of __attribute__ * multipath-tools: Remove trailing whitespaces * multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile * multipath-tools: build objects for libdmmp and libmpathpersist independently * libdmmp: minor Makefile cleanup * multipath-tools: remove incdir from Makefiles * libdmmp: don't disconnect from multipathd twice * multipathd: don't call strlen on NULL variables * libdmmp: move libdmmp.pc install location * multipathd: drop lock before calling uev_add_path * multipathd: allow devices to switch from RW to RO * libmultipath: don't set max_sectors_kb on reloads * Remove a trailing tab * multipath: fix segfault with disable_changed_wwids * multipath-tools: amend text from multipath/multipath.conf.5 * Bump the version code and date * multipath-tools: replace multipath configuration output * Revert "multipathd: set timeout for CLI commands correctly" * libmultipath: fix skip_kpartx support for removing maps * Bump version to 0.7.1- spec file changes suggested by factory review team (bsc#1030699) * RPM group adjustments. * Avoid %__ macro indirections- Enable rados for SLES only for x86_64 and aarch64 (ceph is currently disabled on SLES on s390x and ppc64le) (bsc#1030699) - Downgrade to version 0.6.4+103+suse.bcb5d0f4: * temporarily remove commit "multipathd: fix SIGUSR2 handling" until it's merged in official repo (bsc#1030699)- Spec file: disable librados for architectures for which ceph is not built - Spec file: enable librados by default for SLES12 SP3, disable it on Leap <= 42.1 - Update to version 0.6.4+104+suse.ac0df678: * multipathd: fix SIGUSR2 handling- Update to version 0.6.4+103+suse.bcb5d0f4: * changed to official github repo openSUSE/multipath-tools (no changes code-wise)- Spec file: Added dependency on sg3_utils (boo#1028857)- spec file changes: optional librados and libdmmp support * enabled by default on Factory and Leap (disable with --without-rados, --without-libdmmp) * disabled by default on SLES12 (enable with --with-rados, --with-libdmmp) * libdmmp0_1_0 and libdmmp-devel as separate packages * minor fixes for RPMLINT warnings - Update to version 0.6.4+102.0119472d: * rebased, code-wise identical to previous checkout- Update to version 0.6.4+102.df7d367e: * libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays (bsc#1004858)- Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream): * Make libdmmp build optional * multipath.rules: use -i flag to multipath * kpartx: create symlinks for dmraid devices * kpartx: Add udev compability rules for SUSE * libmultipath/checkers: make RADOS checker optional * multipathd: fixup check for new path states (bsc#1019798) * tur: Add pthread_testcancel() (bsc#101979) * kpartx: sanitize delete partitions (bsc#100869) * libmultipath: coalesce_paths: trigger uevent if nothing done (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: differentiate ACT_NOTHING and ACT_IMPOSSIBLE (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: reload map if not known to udev (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: sysfs_attr_set_value: use const char* (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: select_action: check special features separately (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: disassemble_map: treat aminio like assemble_map does (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: disassemble_map: skip no_path_retry check (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_feature: handle "retain_attached_hw_handler" (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_feature: print log msg if no_path_retry cant be set (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * libmultipath: setup_features: log msg if queue_if_no_path is ignored (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * multipathd: use weaker "force_reload" at startup (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400) * multipathd: imply -n if find_multipaths is set (bsc#1012910) * multipath: ignore -i if find_multipaths is set (bsc#1012910) * libmultipath: move suspend logic to _dm_flush_map (bsc#986838) * multipath -ll: set DI_SERIAL (bsc#991432) * libmultipath: use existing alias from bindings file (bsc#1005255) * libmultipath/discovery: do not cache 'access_state' sysfs attribute (bsc#1004858) * multipathd: issue systemd READY after initial configuration (bsc#1006469) * multipath: avoid crash when using modified configuration (bsc#1000914) * multipathd: Set CLI timeout correctly (bsc#999061) * libmultipath: Do not crash on empty features (bsc#994812) * libmultipath: fall back to search paths by devt (bsc#995645) * multipathd: set timeout for CLI commands correctly (bsc#999061) * Invalid error code when using multipathd CLI * multipath: do not check daemon from udev rules (bsc#986734) * Add support for "multipath=off" and "nompath" on kernel cmdline * multipathd: start daemon after udev trigger (bsc#98673) * multipathd.service: fixup Wants= and Before= statements (bsc#1019181, bsc#991742, bsc#986734) - Update to current upstream (0.6.4-65-ga2675025) * Avoid that reloading a map sporadically triggers I/O errors * fix udev rules for failed multipath devices * multipathd: allow resetting stats * multipathd: add messages on delayed path addition * multipathd: don't update priority of failed paths * libmultipath: cleanup orphan device states * libmultipath: add detect_checker option * kpartx: don't keep creating recursive partitions * multipath-tools: Introducing multipath C API * multipath-tools: sync valgrind.h with 3.12 upstream * multipath-tools: add availability of service-time and queue-length to multipath.conf.5 * multipath-tools: add availability of service-time and queue-length to multipath.conf.5 * Fill NVMe specific path info * Don't blacklist nvme * multipath-tools: fix misspellings * multipath-tools: git should ignore rej and orig files * Include sys/sysmacros.h * Tolerate modprobe failures in multipathd.service * multipath-tools: Remove trailing and leading whitespaces * multipath-tools: Perform socket client uid check on IPC commands. * multipath-tools: Set errno mpath_recv_reply() when failure * multipath-tools: New way to limit the IPC command length. * multipath-tools: libmultipath: Removed unused functions. * multipath-tools: libmultipath: fix gcc link failure on rcu_register_thread_mb. * multipath-tools: multipathd: Fix memory leak on load_config(). * [multipathd] Remove trailing whitespaces * multipathd: deterministic io throughput in multipath- Remove superfluous PreReq for insserv and fillup- Update to version 0.6.2+suse20160928.8939fb6- Implement support for 'multipath=off' and 'nompath' kernel commandline options (bsc#1001691)- multipath: avoid crash when using modified configuration (bsc#1000914)- libmultipath: Do not crash on empty features (bsc#994812) - multipathd: Set CLI timeout correctly (bsc#999061) - Moved multipath-tools repository to github.com:/openSUSE/multipath-tools.git- Fixup glitch from patch 'fixup check from udev rules' (bsc#986734) - Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch; integrated into git repository- libmultipath: fall back to search paths by devt (bsc#995645)- Fixup module name in /usr/lib/modules-load.d (bsc#986734)- multipath: fixup check from udev rules (bsc#986734)- multipathd: start daemon after udev trigger (bsc#986734) - Load device handler and multipath module at boot (bsc#991634)- Do not check daemon from udev rules (bsc#986734,bsc#990538)- Include fixes from upstream: * memory leak in orphan_paths * More hardware table cleanups * Add 'serial' keyword to weightedpath prioritizer - Set timeout for CLI commands correctly (bsc#990265) - Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538) - multipathd.service: Fixup Wants= and Before= statements (bsc#991742, bsc#986734)- Include patches from upstream: * Cleanup hardware tables by removing default entries * More formatting fixes * Order keywords in multipath.conf.5 * Change default pgpolicy from 'failover' to 'group_by_prio' * kpartx: Fix check whether to detach a loop device * Fix partly traversed loop in coalesce_paths() * Fix memory leak in reconfigure() * Cleanup include header files * Bump version code to 0.6.2 - Fix multipath -l without output (bsc#990480) - Fix spelling in a log message - Fix type of rcu_unregister() - Do not perform POSIX mutex operations inside a signal handler - Ensure that signals are delivered to the uxsock thread - Fix memory leak in path group policies - Update tarball to 0.6.2+suse20160728.d96f423- Include patches from upstream: * Makefile cleanup * Update multipath.conf.5 * Update hardware tables * Whitespace cleanup - Fixup crash during shutdown (bsc#988539) - Update tarball to 0.6.1+suse20160715.3d44636- Remove obsoletes spec sections- Move config accesses to use user-space RCU (bsc#987526) * Revert 'move filter_devnode under vector lock' * Revert the rework patch - Include patches from upstream: * Update hardware tables * Update kpartx manpage * Whitespace fixes * Include coverity fixes * Drop AUTHOR file - Update tarball to 0.6.1+suse20160704.6e52398- fix service file to not pretend that this is the upstream version. Now labeled 0.6.1+suse20160603.9b920e3 - Fix BuildRequire to get systemd.pc from correct package (bsc#983167) - point rcmultipathd to /usr/sbin/service to avoid dangling symlink warning- Rework patch 'move filter_devnode under vector lock' (bsc#982348)- multipathd: Fixup definition of set_unlocked_handler_callback() - mpathcmd.h: Update Free Software Foundation address- Do not install header file with mode 755- Update to latest upstream version 0.6.1 * Merge suse-specific patches * Drop multipath.conf.* files * Update to version 0.6.1 * multipathd: move 'filter_devnode' under vector lock * libmultipath: use poll() in uevent_listen() * Increase kpartx retries * Merge Dell MD3XXX hardware table entries * multipathd: Add 'sysfs' prioritizer (bsc#927040) * libmultipath: call get_vpd_uid() if no uid_attribute is set * multipathd: update defaults- Update to latest upstream version 0.6.0 (FATE#319406) * Update documentation * Fix memory leak and segfault in reconfigure * Add wwn keyword to weightedpath prioritizer * Use 64-bit int for command key * check partions unused before removing * print 'fail' when remove fails * add exclusive_pref_bi for alua prioritizer * kpartx: verify parition devices * multipathd: delay reloads during creation * Cut down alua prioritizer ioctls * Add 'ignore_new_boot_devs' option * Add libmpathcmd library and use it internally * retrigger uevents to try and grab uid * Update to version 0.6.0- Port to latest upstream version (FATE#319406, FATE#320255) * kpartx: support device names with spaces * add raw format multipathd commands * make kpartx -d remove all partitions * Add find_multipaths option * Autodetect ALUA CLARiiON configurations * Delayed path reintegration * enable configuration directory * read-only bindings * Add deferred_remove support * correctly set partition delimiter on rename * Add overrides section to multipath.conf * Add additional path wildcards * Add force_sync option * Misc small patches- multipathd: do not flush maps on startup - Use find_path_by_dev() where possible (bsc#924316) - Fixup error return in store_path() (bsc#972329) - Do not display message 'invalid fd'- Fixup overzealous warning 'empty device number' (bsc#969857)- multipathd: fixup signal handling (again) - Revert 'trigger all devices on startup' - multipathd: print error message for invalid arguments - multipathd: block checkerloop during reconfiguration (bsc#946658) - libmultipath: correctly initialize pp->sg_id - multipathd: don't buffer output with systemd (bsc#954726) - multipath.rules: Do not forward partition events (bsc#954726) - libmultipath: improve uxlsnr handling (bsc#954726) - multipathd: do not realloc memory in uxlsnr (bsc#954726) - libmultipath: call get_uid() for all paths (bsc#935312) - multipathd: Do not print misleading message 'not found in pathvec' - multipathd: Do not update the paths vec when removing paths - multipathd: Do not switch paths on empty multipath tables (bsc#956349) - libmultipath: remove 'get_info' argument for adopt_paths() - libmultipath: ensure 'dev_t' is set when store paths (bsc#924316) - libmultipath: Do not store paths with empty dev_t (bsc#924316) - libmultipath: Do not store paths with empty device name (bsc#924316) - libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588) - Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845) - multipath: Reset alias if renaming fails (bsc#943157)- Fixes for md_monitor on zFCP (FATE#319070): * strict loop timings * multipathd: fixup a crash when invoking CLI commands * multipathd: implement 'show map $map format $format- Fixup hang in 'multipath -f' (bsc#941954)- Create package for SLE12-SP1. * Remove multipath-tools-0.5.0-sles12.diff.bz2 * Add multipath-tools-0.5.0-sles12-sp1.diff.bz2 - kpartx: parse emulated DASD devices - multipathd: Fixup queueing mode in 'show maps status' (bsc#933885) - multipathd: Accept zero-sized paths in ev_add_path - Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282) - libmultipath: Fixup 'DM_DEVICE_RELOAD' handling (bsc#933282) - libmultipath: correctly display checker status- Remove 'udev_sync' argument from dm_simplecmd (bsc#903001) - Ensure multipathd is started before systemd-udev-trigger- Only import ID_FS_XXX variables if not set (bsc#909358) - Fixup regular expression for HP MSA 2040 (bsc#920189)- Add dependency on systemd-udevd.service (bsc#903001) - Use ALUA for HP 3PAR (bsc#922105) - Add DX8700 S3 and DX8900 S3 defaults (bsc#921703) - Load all device handler modules on startup (bsc#908529)- libmultipath: make vpd page 0x80 optional (bsc#917963) - Add HP MSA 2040 to the hardware table (bsc#920189) - Revert 'Skip unhandled device types' (bsc#917701)- skip uninitialized devices during reconfiguration (bnc#908915) - memory overflow when printing help text (bnc#909742)- Do not automatically fall back to vpd uid generation - Improve vpd parsing - multipathd: trigger all devices on startup (bnc#901465) - Unset 'uid_attribute' on failure- libmultipath: Fall back to SG_IO if no UID could be assigned (bnc#908915) - Assign local priority for NAA VPD descriptor (bnc#907483) - libmultipath: finally fix dev_loss_tmo setting (bnc#889927) - libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927) - devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809) - kpartx: handle more than 256 loop devices (bnc#898427) - multipathd: fixup locking in uev_remove_map() (bnc#901891) - multipathd: use global variable for uxsock timeout (bnc#900758) - multipathd: remove unused variable in cli_reconfigure() - Add %service calls for multipathd.socket/bin/sh/bin/sh/bin/sh/bin/shmultipath-tools-rbdsheep08 1688607854 0.9.0+119+suse.308c007-150400.4.16.10.9.0+119+suse.308c007-150400.4.16.1 0.9.0+119+suse.308c007 multipathmpathpersistmultipathmultipathddracutdracut.conf.dmultipath.confmodules-load.dmultipath.confmultipathd.servicemultipathd.socketmultipath.conf11-dm-mpath.rules56-multipath.rulesrcmultipathdmultipath-toolsREADME.aluaREADME.mdmultipath-toolsGPL-2.0multipath.conf.5.gzmpathpersist.8.gzmultipath.8.gzmultipathd.8.gz/run//sbin//usr/lib//usr/lib/dracut//usr/lib/dracut/dracut.conf.d//usr/lib/modules-load.d//usr/lib/systemd/system//usr/lib/tmpfiles.d//usr/lib/udev/rules.d//usr/sbin//usr/share/doc/packages//usr/share/doc/packages/multipath-tools//usr/share/licenses//usr/share/licenses/multipath-tools//usr/share/man/man5//usr/share/man/man8/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.suse.de/SUSE:Maintenance:29722/SUSE_SLE-15-SP4_Update/8401b10af18f6deb3b62b3e290d906df-multipath-tools.SUSE_SLE-15-SP4_Updatedrpmxz5x86_64-suse-linuxcannot open `/home/abuild/rpmbuild/BUILDROOT/multipath-tools-0.9.0+119+suse.308c007-150400.4.16.1.x86_64/run/multipath' (No such file or directory)ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=100e1586cac7ea9221041b68619a94ac87ae5ef9, for GNU/Linux 3.2.0, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=c2a29f079a98f1138fa7fffa62379b8a6033a4d6, for GNU/Linux 3.2.0, strippedELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=38a2715a3cc8ef61aeb11a5070cf87c011b7f6ec, for GNU/Linux 3.2.0, strippeddirectoryASCII textASCII text, with very long linestroff or preprocessor input, ASCII text (gzip compressed data, max compression, from Unix) 9 R#RRRRRRRRRR"R RRRRRRRRRR#R!R R)RRR"RR(R RRRR)RR$R%R#R!R R'RRRRRRRRRR(R*R"RR&R RRRR[V+\,/4 if test -x /usr/lib/module-init-tools/regenerate-initrd-posttrans; then /bin/bash -c 'set +e; /usr/lib/module-init-tools/regenerate-initrd-posttrans' fi/bin/shutf-88503352e63a0ede574bd671d1d1fd3c063d22493c2617ddd7cbdc4f5fb12f179?P7zXZ !t/ ]"k%]eBu$q"4xc W됲E(NB)o3 d2Kax5.Cѡ7zOQ {c:+rsK@v$(j{lŊ'khi^-G=`A`!=CaN\W~ V%!OF_{ Vu .Sh,G&аW(Aׅ'5 mg1, 7/50!ڱXyӛM \8oY| }:.5rqۯ \RN]RFƼc *>i\o-a- }A|KP}\(bM)=4&3F+*zo)2~.W]7!v%豵S9D9ƜJ?,>N_N! TbVB>B,70i' kxU}&i;C>9f.RyD#9ۏH{h&T.bOryu j_oMh^FEhJ2G1DSu ?sf уxZg/>N0 .iY.*]%`Rꍼ"P!dO3Vek7*4a#^}cN_2 6*~G$Zf5thP)Pq[<%U չ=;adSULTݩu`UU ] ,cdw YZ