# Makefile.in -- # # This file is a Makefile for Sample TEA Extension. If it has the name # "Makefile.in" then it is a template for a Makefile; to generate the # actual Makefile, run "./configure", which is a configuration script # generated by the "autoconf" program (constructs like "@foo@" will get # replaced in the actual Makefile. # # Copyright (c) 1999 Scriptics Corporation. # Copyright (c) 2002-2005 ActiveState Corporation. # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # RCS: @(#) $Id: Makefile.in,v 1.16 2005/11/20 19:58:18 hobbs Exp $ #======================================================================== # Edit the following few lines when writing a new extension #======================================================================== #======================================================================== # Enumerate the names of the source files included in this package. # This will be used when a dist target is added to the Makefile. # EXTRA_SOURCES will be replaced by WIN_SOURCES or UNIX_SOURCES, as is # appropriate for your platform. It is not important to specify the # directory, as long as it is the $(srcdir) or in the generic, win or # unix subdirectory. #======================================================================== PKG_SOURCES = tclXbsearch.c tclXchmod.c tclXcmdloop.c tclXcoalesce.c tclXdebug.c tclXdup.c tclXfcntl.c tclXfilecmds.c tclXfilescan.c tclXflock.c tclXfstat.c tclXgeneral.c tclXhandles.c tclXinit.c tclXkeylist.c tclXlib.c tclXlist.c tclXmath.c tclXmsgcat.c tclXprocess.c tclXprofile.c tclXselect.c tclXsignal.c tclXstring.c tclXsocket.c tclXutil.c tclXoscmds.c tclXlgets.c tclXchannelfd.c tclXunixCmds.c tclXunixDup.c tclXunixId.c tclXunixOS.c tclXunixSock.c PKG_OBJECTS = tclXbsearch.o tclXchmod.o tclXcmdloop.o tclXcoalesce.o tclXdebug.o tclXdup.o tclXfcntl.o tclXfilecmds.o tclXfilescan.o tclXflock.o tclXfstat.o tclXgeneral.o tclXhandles.o tclXinit.o tclXkeylist.o tclXlib.o tclXlist.o tclXmath.o tclXmsgcat.o tclXprocess.o tclXprofile.o tclXselect.o tclXsignal.o tclXstring.o tclXsocket.o tclXutil.o tclXoscmds.o tclXlgets.o tclXchannelfd.o tclXunixCmds.o tclXunixDup.o tclXunixId.o tclXunixOS.o tclXunixSock.o #======================================================================== # Identify the object files. This replaces .c with .$(OBJEXT) for all # the named source files. These objects are created and linked into the # final library. In these do not correspond directly to the source files # above, you will need to enumerate the object files here. # Normally we would use $(OBJEXT), but certain make executables won't do # the extra macro in a macro conversion properly. # # "tclx_LIB_FILE" refers to the library (dynamic or static as per # configuration options) composed of the named objects. #======================================================================== TEST_OBJS = tclXunixTest.$(OBJEXT) #======================================================================== # PKG_TCL_SOURCES identifies Tcl runtime files that are associated with # this package that need to be installed, if any. #======================================================================== PKG_TCL_SOURCES = library/tclx.tcl library/autoload.tcl library/arrayprocs.tcl library/compat.tcl library/convlib.tcl library/edprocs.tcl library/events.tcl library/forfile.tcl library/globrecur.tcl library/help.tcl library/profrep.tcl library/pushd.tcl library/setfuncs.tcl library/showproc.tcl library/stringfile.tcl library/tcllib.tcl library/fmath.tcl library/buildhelp.tcl #======================================================================== # This is a list of public header files to be installed, if any. #======================================================================== PKG_HEADERS = generic/tclExtend.h #======================================================================== # Add additional lines to handle any additional AC_SUBST cases that # have been added to the configure script. #======================================================================== HELP_DIR = /Volumes/RAID/var/tmp/mprsyncup/release/base/vendor/tclx/help HELP_DIR_NATIVE = `echo ${HELP_DIR}` #======================================================================== # Nothing of the variables below this line need to be changed. Please # check the TARGETS section below to make sure the make targets are # correct. #======================================================================== #======================================================================== # "PKG_LIB_FILE" refers to the library (dynamic or static as per # configuration options) composed of the named objects. #======================================================================== PKG_LIB_FILE = libtclx8.6.dylib lib_BINARIES = $(PKG_LIB_FILE) BINARIES = $(lib_BINARIES) SHELL = /bin/sh srcdir = . prefix = /Volumes/RAID/var/tmp/mprsyncup/opt/local/libexec/macports exec_prefix = /Volumes/RAID/var/tmp/mprsyncup/opt/local/libexec/macports bindir = ${exec_prefix}/bin libdir = ${exec_prefix}/lib datadir = ${prefix}/share mandir = ${prefix}/share/man includedir = ${prefix}/include DESTDIR = PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION) pkgdatadir = $(datadir)/$(PKG_DIR) pkglibdir = $(libdir)/$(PKG_DIR) pkgincludedir = $(includedir)/$(PKG_DIR) top_builddir = . INSTALL = /usr/bin/install -c INSTALL_PROGRAM = ${INSTALL} INSTALL_DATA = ${INSTALL} -m 644 INSTALL_SCRIPT = ${INSTALL} PACKAGE_NAME = tclx PACKAGE_VERSION = 8.6 CC = clang CFLAGS_DEFAULT = -Os -DNDEBUG CFLAGS_WARNING = -Wall CLEANFILES = pkgIndex.tcl EXEEXT = LDFLAGS_DEFAULT = -prebind -headerpad_max_install_names -Wl,-search_paths_first MAKE_LIB = ${SHLIB_LD} -o $@ $(PKG_OBJECTS) ${SHLIB_LD_LIBS} MAKE_SHARED_LIB = ${SHLIB_LD} -o $@ $(PKG_OBJECTS) ${SHLIB_LD_LIBS} MAKE_STATIC_LIB = ${STLIB_LD} $@ $(PKG_OBJECTS) MAKE_STUB_LIB = ${STLIB_LD} $@ $(PKG_STUB_OBJECTS) OBJEXT = o RANLIB = : RANLIB_STUB = ranlib SHLIB_CFLAGS = -fno-common SHLIB_LD = ${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT} -Wl,-single_module -current_version 8.6 -compatibility_version 8.6 SHLIB_LD_LIBS = ${LIBS} -L/Volumes/RAID/var/tmp/mprsyncup/release/base/vendor/tcl/unix -ltclstub8.6 STLIB_LD = ${AR} cr TCL_DEFS = -DPACKAGE_NAME=\"tcl\" -DPACKAGE_TARNAME=\"tcl\" -DPACKAGE_VERSION=\"8.6\" -DPACKAGE_STRING=\"tcl\ 8.6\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DNO_VALUES_H=1 -DHAVE_SYS_PARAM_H=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DHAVE_PTHREAD_ATTR_SETSTACKSIZE=1 -DHAVE_PTHREAD_ATFORK=1 -DTCL_THREADS=1 -DTCL_CFGVAL_ENCODING=\"iso8859-1\" -DHAVE_ZLIB=1 -DMODULE_SCOPE=extern\ __attribute__\(\(__visibility__\(\"hidden\"\)\)\) -DHAVE_HIDDEN=1 -DMAC_OSX_TCL=1 -DHAVE_COREFOUNDATION=1 -DHAVE_CAST_TO_UNION=1 -DHAVE_VFORK=1 -DHAVE_POSIX_SPAWNP=1 -DHAVE_POSIX_SPAWN_FILE_ACTIONS_ADDDUP2=1 -DHAVE_POSIX_SPAWNATTR_SETFLAGS=1 -DTCL_SHLIB_EXT=\".dylib\" -DNDEBUG=1 -DTCL_CFG_OPTIMIZED=1 -DMP_PREC=4 -DTCL_WIDE_INT_IS_LONG=1 -DHAVE_GETCWD=1 -DHAVE_MKSTEMP=1 -DHAVE_OPENDIR=1 -DHAVE_STRTOL=1 -DHAVE_WAITPID=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_FREEADDRINFO=1 -DHAVE_GAI_STRERROR=1 -DHAVE_STRUCT_ADDRINFO=1 -DHAVE_STRUCT_IN6_ADDR=1 -DHAVE_STRUCT_SOCKADDR_IN6=1 -DHAVE_STRUCT_SOCKADDR_STORAGE=1 -DHAVE_GETPWUID_R_5=1 -DHAVE_GETPWUID_R=1 -DHAVE_GETPWNAM_R_5=1 -DHAVE_GETPWNAM_R=1 -DHAVE_GETGRGID_R_5=1 -DHAVE_GETGRGID_R=1 -DHAVE_GETGRNAM_R_5=1 -DHAVE_GETGRNAM_R=1 -DHAVE_MTSAFE_GETHOSTBYNAME=1 -DHAVE_MTSAFE_GETHOSTBYADDR=1 -DHAVE_TERMIOS_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_GMTIME_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_MKTIME=1 -DHAVE_TM_GMTOFF=1 -DHAVE_TIMEZONE_VAR=1 -DHAVE_STRUCT_STAT_ST_BLOCKS=1 -DHAVE_STRUCT_STAT_ST_BLKSIZE=1 -DHAVE_BLKCNT_T=1 -DHAVE_INTPTR_T=1 -DHAVE_UINTPTR_T=1 -DHAVE_SIGNED_CHAR=1 -DHAVE_LANGINFO=1 -DHAVE_CHFLAGS=1 -DHAVE_MKSTEMPS=1 -DHAVE_GETATTRLIST=1 -DHAVE_COPYFILE_H=1 -DHAVE_COPYFILE=1 -DHAVE_LIBKERN_OSATOMIC_H=1 -DHAVE_OSSPINLOCKLOCK=1 -DTCL_DEFAULT_ENCODING=\"utf-8\" -DTCL_LOAD_FROM_MEMORY=1 -DTCL_WIDE_CLICKS=1 -DHAVE_AVAILABILITYMACROS_H=1 -DHAVE_WEAK_IMPORT=1 -D_DARWIN_C_SOURCE=1 -DHAVE_FTS=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_FILIO_H=1 -DTCL_UNLOAD_DLLS=1 -DHAVE_CPUID=1 TCL_BIN_DIR = /Volumes/RAID/var/tmp/mprsyncup/release/base/vendor/tcl/unix TCL_SRC_DIR = /Volumes/RAID/var/tmp/mprsyncup/release/base/vendor/tcl # This is necessary for packages that use private Tcl headers TCL_TOP_DIR_NATIVE = "/Volumes/RAID/var/tmp/mprsyncup/release/base/vendor/tcl" # Not used, but retained for reference of what libs Tcl required TCL_LIBS = ${DL_LIBS} ${LIBS} ${MATH_LIBS} #======================================================================== # TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our # package without installing. The other environment variables allow us # to test against an uninstalled Tcl. Add special env vars that you # require for testing here (like TCLX_LIBRARY). #======================================================================== EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR) TCLSH_ENV = TCL_LIBRARY=`echo $(TCL_SRC_DIR)/library` \ TCLX_LIBRARY=`echo $(srcdir)/library` \ TCLX_HELP_DIR="$(HELP_DIR_NATIVE)" \ DYLD_LIBRARY_PATH="$(EXTRA_PATH):$(DYLD_LIBRARY_PATH)" \ PATH="$(EXTRA_PATH):$(PATH)" \ TCLLIBPATH="$(top_builddir)" TCLSH_PROG = /Volumes/RAID/var/tmp/mprsyncup/release/base/vendor/tcl/unix/tclsh TCLSH = $(TCLSH_ENV) $(TCLSH_PROG) SHARED_BUILD = 1 TCLX_TOOLS_SRC_DIR = `echo $(srcdir)/unix/tools` TCLX_DOC_DIR = `echo $(srcdir)/doc` TCLX_INSTCOPY = ${TCLSH} ${TCLX_TOOLS_SRC_DIR}/instcopy.tcl TCLX_HELP_INST_DIR = `echo $(DESTDIR)$(pkglibdir)/help` INCLUDES = -I"./generic" -I"./unix" -I"/Volumes/RAID/var/tmp/mprsyncup/release/base/vendor/tcl/generic" -I"/Volumes/RAID/var/tmp/mprsyncup/release/base/vendor/tcl/unix" PKG_CFLAGS = DEFS = -DPACKAGE_NAME=\"tclx\" -DPACKAGE_TARNAME=\"tclx\" -DPACKAGE_VERSION=\"8.6\" -DPACKAGE_STRING=\"tclx\ 8.6\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DFULL_VERSION=\"8.6.3\" -DBUILD_tclx=/\*\*/ -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DNO_VALUES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DTCL_THREADS=1 -DMODULE_SCOPE=extern\ __attribute__\(\(__visibility__\(\"hidden\"\)\)\) -DHAVE_HIDDEN=1 -DHAVE_CAST_TO_UNION=1 -DTCL_WIDE_INT_IS_LONG=1 -DUSE_TCL_STUBS=1 -DHAVE_SYS_SELECT_H=1 -DRETSIGTYPE=void -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_STRUCT_TM_TM_ZONE=1 -DHAVE_TM_ZONE=1 -DHAVE_GMTIME_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_TM_GMTOFF=1 -DHAVE_TIMEZONE_VAR=1 -DHAVE_RRESVPORT=1 $(PKG_CFLAGS) CONFIG_CLEAN_FILES = Makefile CPPFLAGS = LIBS = AR = ar CFLAGS = -pipe ${CFLAGS_DEFAULT} ${CFLAGS_WARNING} ${SHLIB_CFLAGS} COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) #======================================================================== # Start of user-definable TARGETS section #======================================================================== #======================================================================== # TEA TARGETS. Please note that the "libraries:" target refers to platform # independent files, and the "binaries:" target inclues executable programs and # platform-dependent libraries. Modify these targets so that they install # the various pieces of your package. The make and install rules # for the BINARIES that you specified above have already been done. #======================================================================== all: binaries libraries doc #======================================================================== # The binaries target builds executable programs, Windows .dll's, unix # shared/static libraries, and any other platform-dependent files. # The list of targets to build for "binaries:" is specified at the top # of the Makefile, in the "BINARIES" variable. #======================================================================== binaries: $(BINARIES) pkgIndex.tcl libraries: doc: install: all install-binaries install-libraries install-doc install-binaries: binaries install-lib-binaries install-bin-binaries #======================================================================== # This rule installs platform-independent files, such as header files. #======================================================================== install-libraries: libraries @mkdir -p $(DESTDIR)$(includedir) @echo "Installing header files in $(DESTDIR)$(includedir)" @list='$(PKG_HEADERS)'; for i in $$list; do \ echo "Installing $(srcdir)/$$i" ; \ $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \ done; #======================================================================== # Install documentation. Unix manpages should go in the $(mandir) # directory. #======================================================================== install-doc: doc install-help @mkdir -p $(DESTDIR)$(mandir)/mann @echo "Installing documentation in $(DESTDIR)$(mandir)" @list='$(srcdir)/doc/*.n'; for i in $$list; do \ echo "Installing $$i"; \ rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \ $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \ done test: binaries libraries $(TCLSH) `echo $(srcdir)/tests/all.tcl` $(TESTFLAGS) shell: binaries libraries @$(TCLSH) $(SCRIPT) GDB = gdb gdb: $(TCLSH_ENV) $(GDB) $(TCLSH_PROG) $(SCRIPT) #VALGRINDFLAGS=--logfile-fd=9 #TESTFLAGS=9> valgrind.log valgrindtest: binaries libraries $(TCLSH_ENV) valgrind --num-callers=12 --leak-resolution=high -v --leak-check=yes --show-reachable=yes $(VALGRINDFLAGS) $(TCLSH_PROG) `echo $(srcdir)/tests/all.tcl` $(TESTFLAGS) valgrind: binaries libraries $(TCLSH_ENV) valgrind --num-callers=12 --leak-resolution=high -v --leak-check=yes --show-reachable=yes $(VALGRINDFLAGS) $(TCLSH_PROG) $(SCRIPT) depend: #======================================================================== # $(PKG_LIB_FILE) should be listed as part of the BINARIES variable # mentioned above. That will ensure that this target is built when you # run "make binaries". # # The $(PKG_OBJECTS) objects are created and linked into the final # library. In most cases these object files will correspond to the # source files above. #======================================================================== $(PKG_LIB_FILE): $(PKG_OBJECTS) -rm -f $(PKG_LIB_FILE) ${MAKE_LIB} $(RANLIB) $(PKG_LIB_FILE) pkgIndex.tcl: (echo 'package ifneeded Tclx $(PACKAGE_VERSION) \ [list load [file join $$dir $(PKG_LIB_FILE)] Tclx]'\ ) > pkgIndex.tcl #======================================================================== # We need to enumerate the list of .c to .o lines here. # # In the following lines, $(srcdir) refers to the toplevel directory # containing your extension. If your sources are in a subdirectory, # you will have to modify the paths to reflect this: # # sample.$(OBJEXT): $(srcdir)/generic/sample.c # $(COMPILE) -c `echo $(srcdir)/generic/sample.c` -o $@ # # Setting the VPATH variable to a list of paths will cause the # makefile to look into these paths when resolving .c to .obj # dependencies. #======================================================================== VPATH = $(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win:$(srcdir)/compat .c.o: $(COMPILE) -c `echo $<` -o $@ #======================================================================== # Distribution creation # You may need to tweak this target to make it work correctly. #======================================================================== #COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar COMPRESS = tar jcvf $(PKG_DIR).tar.bz2 $(PKG_DIR) DIST_ROOT = /tmp/dist DIST_DIR = $(DIST_ROOT)/$(PKG_DIR) dist-clean: rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.* dist: dist-clean mkdir -p $(DIST_DIR) cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \ $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \ $(DIST_DIR)/ chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4 chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in mkdir $(DIST_DIR)/tclconfig cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \ $(DIST_DIR)/tclconfig/ chmod 664 $(DIST_DIR)/tclconfig/tcl.m4 chmod +x $(DIST_DIR)/tclconfig/install-sh list='doc generic library tests tests/compat unix unix/tools win'; \ for p in $$list; do \ if test -d $(srcdir)/$$p ; then \ mkdir $(DIST_DIR)/$$p; \ cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \ fi; \ done cp -p $(srcdir)/unix/INSTALL $(DIST_DIR)/unix/; cp -p $(srcdir)/unix/tools/*manpages $(DIST_DIR)/unix/tools/; (cd $(DIST_ROOT); $(COMPRESS);) #======================================================================== # End of user-definable section #======================================================================== #======================================================================== # Don't modify the file to clean here. Instead, set the "CLEANFILES" # variable in configure.in #======================================================================== clean: helpclean -test -z "$(BINARIES)" || rm -f $(BINARIES) -rm -f *.$(OBJEXT) core *.core -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) helpclean: -rm -rf $(HELP_DIR) distclean: clean -rm -f *.tab.c -rm -f $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log config.status #======================================================================== # Install binary object libraries. On Windows this includes both .dll and # .lib files. Because the .lib files are not explicitly listed anywhere, # we need to deduce their existence from the .dll file of the same name. # Library files go into the lib directory. # In addition, this will generate the pkgIndex.tcl # file in the install location (assuming it can find a usable tclsh shell) # # You should not have to modify this target. #======================================================================== install-lib-binaries: @mkdir -p $(DESTDIR)$(pkglibdir) @list='$(lib_BINARIES)'; for p in $$list; do \ if test -f $$p; then \ echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \ $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \ stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \ if test "x$$stub" = "xstub"; then \ echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \ $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \ else \ echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \ $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \ fi; \ ext=`echo $$p|sed -e "s/.*\.//"`; \ if test "x$$ext" = "xdll"; then \ lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ if test -f $$lib; then \ echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \ $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \ fi; \ fi; \ fi; \ done @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ if test -f $(srcdir)/$$p; then \ destp=`basename $$p`; \ echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \ fi; \ done @if test "x$(SHARED_BUILD)" = "x1"; then \ echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \ $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \ fi #======================================================================== # Install binary executables (e.g. .exe files and dependent .dll files) # This is for files that must go in the bin directory (located next to # wish and tclsh), like dependent .dll files on Windows. # # You should not have to modify this target, except to define bin_BINARIES # above if necessary. #======================================================================== install-bin-binaries: @mkdir -p $(DESTDIR)$(bindir) @list='$(bin_BINARIES)'; for p in $$list; do \ if test -f $$p; then \ echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ fi; \ done .SUFFIXES: .c .$(OBJEXT) Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status uninstall-binaries: list='$(lib_BINARIES)'; for p in $$list; do \ rm -f $(DESTDIR)$(pkglibdir)/$$p; \ done list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ p=`basename $$p`; \ rm -f $(DESTDIR)$(pkglibdir)/$$p; \ done list='$(bin_BINARIES)'; for p in $$list; do \ rm -f $(DESTDIR)$(bindir)/$$p; \ done .PHONY: all binaries clean depend distclean doc install libraries test # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #------------------------------------------------------------------------------ # Build help for Tcl & TclX. These files are normally part of the # distribution and not rebuilt by users. # buildhelp: help help: $(BINARIES) if test ! -d "${HELP_DIR}" ; then \ mkdir -p "${HELP_DIR}" ; \ ${TCLSH} ${TCLX_TOOLS_SRC_DIR}/bldmanhelp.tcl \ `echo ${TCL_SRC_DIR}/doc` \ ${TCLX_TOOLS_SRC_DIR}/tclmanpages ${HELP_DIR_NATIVE} Tcl.brf; \ ${TCLSH} ${TCLX_TOOLS_SRC_DIR}/runbuildhelp.tcl \ ${HELP_DIR_NATIVE} TclX.brf ${TCLX_DOC_DIR}/TclX.n; \ fi install-help: @if test -d "${HELP_DIR}" ; then \ echo "Installing TclX help files in ${TCLX_HELP_INST_DIR}"; \ mkdir -p ${TCLX_HELP_INST_DIR}; \ ${TCLX_INSTCOPY} ${HELP_DIR_NATIVE} ${TCLX_HELP_INST_DIR}; \ fi