vm (8.2.0b-2.1) unstable; urgency=medium * Non-maintainer upload. * Support emacs25. Change build dependency from emacs24 to "emacs25-nox | emacs25 | emacs24", and allow emacs25 as a flavor in the postinst and postrm (Closes: #846991). -- Rob Browning Sat, 07 Jan 2017 14:38:24 -0600 vm (8.2.0b-2) unstable; urgency=low * Updated to standards version 3.9.6, no changes needed * Fix the VCS-* fields in the control file to use https * Mover back for source format 1.0, and use dgit to release -- Manoj Srivastava Mon, 25 Jan 2016 13:47:31 -0800 vm (8.2.0b-1) unstable; urgency=low * New upstream release. This has been in Beta for two years now, and seems to work fine. -- Manoj Srivastava Mon, 28 Apr 2014 16:31:54 -0700 vm (8.1.2-2.1) unstable; urgency=low * Non-maintainer upload. * Fixed texinfo warnings and errors leading to an FTBFS (Closes: #712368) -- Hilko Bengen Sat, 23 Nov 2013 16:25:12 +0100 vm (8.1.2-2) unstable; urgency=low * Also add emacs24 to the postinst, so we register with ucf * Bug fix: "deletes shipped file during installation: /usr/share/emacs/site-lisp/vm/vm-autoloads.el", thanks to Andreas Beckmann (Closes: #706373). -- Manoj Srivastava Mon, 29 Apr 2013 13:02:37 -0700 vm (8.1.2-1) unstable; urgency=low * New upstream release * Bug fix: "unowned files after purge (policy 6.8, 10.8)", thanks to Andreas Beckmann. We don't need that file, so we should not install it in the first place. (Closes: #656219). * Bug fix: "vm/w3m incorrectly displays HTML Mime contents with charset different from locale", thanks to comcap@free.fr. This has been fixed in this new upstream version. (Closes: #635909). -- Manoj Srivastava Sun, 28 Apr 2013 00:22:49 -0700 vm (8.1.0-1) unstable; urgency=low * New upstream version * [20fe869]: Merge branch 'upstream' into topic--debian * Bug fix: "sc-cite-original citation hook fails for mime encoded messages", thanks to Klaus Reichl (Closes: #550859). * Bug fix: "8bit characters are not escapes in In-reply-to field", thanks to Neil Brown (Closes: #434565). * Bug fix: "vm-mime-encode-headers may mess up recipient addresses", thanks to Francois Fleuret (Closes: #553402). -- Manoj Srivastava Sun, 28 Mar 2010 08:03:45 -0700 vm (8.0.13-1) unstable; urgency=low * New upstream release. The project isunder new management now. This is a bug fixing release, which handles a flaw in caching. -- Manoj Srivastava Sun, 29 Nov 2009 11:48:54 -0600 vm (8.0.12-7) unstable; urgency=low * Told lintian to stop parsing old changelogs. -- Manoj Srivastava Sun, 01 Nov 2009 20:21:57 -0600 vm (8.0.12-6) unstable; urgency=low * Take extra care to remove cruft during remove and/or purge. -- Manoj Srivastava Tue, 20 Oct 2009 09:59:26 -0500 vm (8.0.12-5) unstable; urgency=low * [e457f1c]: [topic--debian]: remove references to vm-easymenu Bug fix: "vm.el still references vm-easymenu, which has gone", thanks to Klaus Reichl (Closes: #470263). -- Manoj Srivastava Mon, 12 Oct 2009 22:59:37 -0500 vm (8.0.12-4) unstable; urgency=low * New release to bring package into conformance with latest policy. * [88e374f]: [vm]: Info files are now installed using triggers -- Manoj Srivastava Sun, 16 Aug 2009 16:58:04 -0500 vm (8.0.12-3) unstable; urgency=low * A new, bug fixing release. * [1493c77]: [vm] Remove files from the site-lisp directory This was caught by piuparts. * Updated Standards version to 3.8.2.0. Also, use emacs23 instead of emacs22, now that it has entered testing. * Info files are now installed using triggers. -- Manoj Srivastava Thu, 13 Aug 2009 12:38:42 -0500 vm (8.0.12-2) unstable; urgency=low * This version of VM does not work with Emacs 21 and lower, since those versions are missing the custom-autoload function which is used invm-autoloads.el. As a result, no autoloads for vm are defined, making vm completely unusable with emacs21. VM no longer byte compiles itself for those versions. Remove support for emacs20 and emacs21 in emacsen.{install,remove}, add support for emacs23. Also add an NEWS.Debian file to document this change. Bug fix: "broken with emacs21 - (void-function custom-autoload)", thanks to Sven Joachim (Closes: #508543). * [c9a55df]: Added missing autoload cookie for vm-decode-postponed-mime-message. For good measure, add an autoload directive to the vm-init file as well. Bug fix: "Now requires forced load of vm-pine ", thanks to Dirk Eddelbuettel (Closes: #516591). * [debiandir:a9a97a6]: remove call to install-docs, since this is now done with triggers. * [debiandir:263c26a]: Remove configure generated files in clean target -- Manoj Srivastava Sun, 22 Mar 2009 02:19:48 -0500 vm (8.0.12-1) unstable; urgency=low * New upstream release [b68c89b] Merge branches 'upstream', 'topic--debian' and 'topic--base64' [580b1fe] Merge branch 'upstream' into topic--debian [5007800] Merge branch 'upstream' into topic--base64 [f6416fc] Imported vm-8.0.12 IMPROVEMENTS: + Display version info when calling `vm-version' interactively. (Thanks to Ulrich Mueller) + Yanking of messages uses the same MIME decoding as the presentation now. See the new variable `vm-mime-yank-attachments' to configure if attachments are also yanked. + `u-vm-color.el' is bundled and maintained with VM now. Ulf Jasper handed it over to me as he switched to Gnus. BUGFIXES: + Detect w3 by using `locate-library' instead of checking for a bound `w3-about'. (Thanks to Klaus Straubinger) + vm.revno.el was not installed anymore b "make install". (Thanks to Ulrich Mueller for reporting) + Insert `emacs-version' instead of creating wrong version string for XEmacs, i.e. the patch level was the major version. (Thanks to Stephen Turnbull) + Correctly locate the data directory for the pixmaps when running as a XEmacs package. + Check for some MIME character sets that may be available in recent XEmacs. (Thanks to Aidan Kehoe for the patch) + Some documentation fixes. (Thanks to Michael Ernst for the patches) + Fixed infinite loop in vm-mime-encode-words on XEmacs 21.5-b28. (Thanks to Aidan Kehoe for the patch) + Detect "score" (additionally to "hits") in "X-Spam-Status:" headers in `vm-su-spam-score-aux'. (Patch from Michael Ernst) + Typo fix in vm-pcrisis.texinfo. (Patch from Michael Ernst) + Header encoding was BASE64 instead of QP by default and it was not encoding whole words, but only the 8bit chars instead. (Thanks to Ulrich Mueller for reporting) + MIME text parts interleaved by attachments are now correctly yanked, e.g. when replying to a message. + Limit the buffer-name length and sanitize the used characters. (Thanks to Mark Diekhans for reporting) + Do not fail on corrupted address headers. (Reported by John Covici) + Fixed GTK detection and toolbar handling for newer Emacs 22 versions. -- Manoj Srivastava Thu, 06 Nov 2008 23:16:48 -0600 vm (8.0.11-1) unstable; urgency=low * New upstream release. Excerpted changes: + Removed dependency of vm-revno.el to other lisp sources to avoid building it in a release bundle. (Thanks to Ralf Fassel) + Added missing documentation for `vm-user-agent', "?" binding and 'vm-delete-duplicate-messages'. (Thanks to Alan Wehmann) + `vm-message-history.el' now uses a buffer similar to the summary for browsing the history. The buffer replaces the summary buffer when present. Duplicate history entries will be removed. + Define and use `vm-replace-in-string' which is `replace-in-string' from XEmacs to avoid clashes with other GNU Emacs packages defining it differently. Unfortunately, GNU Emacs still does not provide this handy function. (Thanks to José Miguel Figueroa) + MIME encoding of header will automatically happen now and has been moved from `vm-rfaddons.el' to `vm-mime.el' and `vm-vars.el'. + Leading lines of a yanked message were accidently taken as headers and got removed if `vm-reply-include-presentation' was t. + Fixed encoding of headers for trailing 8 bit characters. (Thanks to Lutz Euler for the patch) + Decode (QP-)encoded clear text before decrypting it. + Use nil as default for `vm-mime-8bit-composition-charset' and thus enable proper detection of right charset. (Thanks to Naoki Saito for reporting and debugging) + Fixed bug in `vm-mime-display-external-generic' for GNU Emacs 23 causing corrupted content in the output file. The old code has been replaced by a call to `vm-mime-send-body-to-file' which avoids duplication and works. There has been some special handling for `vm-fsfemacs-mule-p', but the actual reason for this was unclear so it has been removed. + Correctly handle `vm-enable-addons' being t. + Correctly store UTF-8 strings in the X-VM-v5-Data header to avoid corruption of summay lines. (Thanks to Yuning Feng for reporting) + Correctly encode multibyte subjects. (Thanks to Yuning Feng for the patch) + Use BASE64 for header encoding when there are special chars not quoted by QP normally. You may configure this by `vm-mime-encode-headers-type'. + qp-decode program handles premature end of QP-encoded stream now gracefully. (Thanks to Ralf Fassel for the bug report, fix and testing) + Added missing newline after "Content-Type" when using the command `vm-mime-attach-object-from-message'. (Thanks to Dan Freed) -- Manoj Srivastava Fri, 29 Aug 2008 15:24:42 -0500 vm (8.0.9-4) unstable; urgency=low * Updated the control file to reflect moving the package to a public git repository at http://git.debian.org/git/users/srivasta/debian/vm.git * Bug fix: "vm: Error while loading 50vm-init", thanks to Laurent Bonnaud. Since the variable is defined in vm-vars, as is the missing function, wrap the setting of the pixamp directory in an eval-after-load vm-vars. (Closes: #475646). -- Manoj Srivastava Sun, 27 Apr 2008 22:51:03 -0500 vm (8.0.9-3) unstable; urgency=low * Correct setting in vm-init.el, based on guidance by Kurt Hornik. The directory setting were wrong, and now we just let the upstream default remain for vm-image-directory, and add a setting for vm-toolbar-pixmap-directory that reflects the upstream version, modified for Debian variations. -- Manoj Srivastava Thu, 03 Apr 2008 00:07:29 -0500 vm (8.0.9-2) unstable; urgency=high * Bug fix: "vm: Installer overwrites vm-init.el before it uses it.", thanks to Klaus Reichl. Thanks to Sven Joachim for finding the bug, and for a patch. Closes: #465748,#470275 * Make sure we delete files from /usr/share/emacs/site-lisp/vm on removal (these are not conffiles, so can go on removal, instead of hanging around until purged). -- Manoj Srivastava Wed, 19 Mar 2008 13:38:12 -0500 vm (8.0.9-1) unstable; urgency=low * New upstream release * Added documentation to `vm-mime-external-content-types-alist' that no extra single quotes should be used around %f as the file name is already quoted for the shell. (Thanks to Martin Schwenke) * Fixed version number generation in release script. It was broken for 8.0.8, i.e. it was showing 8.0.x-xemacs-542 instead. Now also other branch related information is stored in the file vm-revno.el. * Reactivated "Allow defadvice on function `vm' by recursing on session start". It should work correctly now. * Added interactive `vm-pipe-message-to-command-discard-output' and the non-interactive `vm-pipe-message-to-command-to-string' for using it in own functions. * Added `vm-pipe-messages-to-command*' for bulk piping messages to a single command, i.e. like saving to a pipe. This is substantially faster than `vm-pipe-message-to-command*' which call the command on each message separately. You may want to use it to feed spamassasin. * Modified key bindings for piping messages, i.e. "|" is a prefix key now. Type it twice to get the old pipe command, "|d" will call the discard the output, just display some infos in the mode line. "|s" will call `vm-pipe-messages-to-command' and "|n" will also call it but discard the output. * Removed vm-easymenu.el and use easymenu.el instead. * In `vm-save-message-preview', ask the user if the output file already exists instead of silently overwriting it. * Moved [Undo] to Dispose menu and [Emacs] to Help menu as these do not work in Emacs 22 anymore when on the menu bar. * Fixed intermixing of signature and quoted text in reply if `vm-reply-include-presentation' is t. (Thanks to Roland Winkler for debugging and reporting) * Fixed yanking of presentation from wrong folder when folder is virtual. (Thanks to Roland Winkler for reporting) * Redistributed flag not displayed in presentation buffer mode line. https://bugzilla.redhat.com/show_bug.cgi?id=428248 (Thanks to Jonathan Underwood for the fix) * `vm-submit-bug-report' gets the variables dynamically now and thus does not miss new ones or references old ones anymore. * Correctly determine the real folder when postponing compositions started from a virtual folder. (Thanks to Uday S. Reddy for reporting and debugging) * Avoid crash when `vm-mouse-set-mouse-track-highlight' is not called within a summary buffer or without a valid message pointer. * Do not disable modes which do not exist. (Thanks to Uday S. Reddy for reporting) * Fix compilation of autoloads. Closes: 465748 -- Manoj Srivastava Thu, 21 Feb 2008 16:22:43 -0600 vm (8.0.7-1) unstable; urgency=low * New upstream release Closes: #435917 This is a pretty major release. Releases are numbered now MAJOR.MINOR.PATCHLEVEL, where MAJOR is increased when fundamental changes occur, MINOR for new features and PATCHLEVEL for bugfix releases. Better built system based on configure. Autoloads are generated only for those functions marked with the autoload token now, which are mainly interactive function. Thus, loading occurs only on demand and startup should be faster. * We now prefer emacs22, though we still install on emacs21. Closes: #434022 -- Manoj Srivastava Fri, 08 Feb 2008 21:15:32 -0600 vm (7.19-14) unstable; urgency=low * Bug fix: "vm: Please support emacs22", thanks to Sven Joachim (Closes: #432105). -- Manoj Srivastava Sat, 07 Jul 2007 15:11:00 -0500 vm (7.19-13) unstable; urgency=low * Added XS-VCS-Arch and XS-VCS-Browse to debian/control * Bug fix: "vm: suggests unavailable package mime-codecs", thanks to Sven Joachim (Closes: #412371). -- Manoj Srivastava Tue, 17 Apr 2007 19:45:51 -0500 vm (7.19-12) unstable; urgency=medium * Bug fix: "vm: Byte-compilation very slow under Emacs 22", thanks to Tim Cross. This would be a low risk improvement for etch. (Closes: #410492). * Bug fix: "vm should depend on emacs21 *OR emacs-snapshot*", thanks to Philippe Queinnec. I've decided to add emacs-snapshot to the dependencies, since this is likely to be a more popular option as time goes on. Also, the package already byte-compiles and otherwise fully supports emacs22 (and emacs23, which is what I tend to use now), so this is essentially bringing the control file up to speed. (Closes: #398877). * These two improvements now make emacs-snapshot a full status supported version for VM. There is no code change -- the code already supported emacs-snapshot, and is known to work. This just allows people to uninstall emacs21 (without the control file change, one had to have emacs21 and emacs-snapshot both installed for emqacs-snapshot to be supported, which is rather silly. -- Manoj Srivastava Sat, 24 Feb 2007 10:10:53 -0600 vm (7.19-11) unstable; urgency=medium * Bug fix: "vm: purging the package fails (ucf unavailable)", thanks to Bill Allombert (Closes: #389966). -- Manoj Srivastava Fri, 29 Sep 2006 14:18:38 -0500 vm (7.19-10) unstable; urgency=low * Suggest stunnel, since we need something like that to provide secure access to remote mail. * Bug fix: "vm: please Recommend: or Suggest: stunnel", thanks to Daniel Kahn Gillmor (Closes: #381066). -- Manoj Srivastava Mon, 21 Aug 2006 21:53:47 -0500 vm (7.19-9) unstable; urgency=low * Split control file into two versions -- and select a control file based on whether or not we have been instructed to build mime-codecs. -- Manoj Srivastava Mon, 27 Feb 2006 09:48:12 -0600 vm (7.19-8) unstable; urgency=low * Don't build mime-codecs any longer, due to several grave issues with the code. Instead, document how people may use the perl one liners in VM, thanks to Daniel Kahn Gillmor. * Bug fix: "mime-codecs should be dropped", thanks to Manoj Srivastava done. (Closes: #329683). * Bug fix: "mime-codecs: base64-decode fails to properly decode many valid base64-encoded files", thanks to Daniel Kahn Gillmor. Instead of trying out the patch provided (thanks for that, it was appreciated), I decided to instead drop the mime-codecs package entirely, since the perl one liners can easily replace them -- and these modules are already in perl, an essential package. (fixes: #338115). * Bug fix: "mime-codecs: please support [file name] and [-o outputfile]", thanks to Martin Michlmayr. We no longer ship mime-codecs. (fixes: #213443). * Bug fix: "vm: Skip byte-compilation when already done", thanks to Peter S Galbraith (Closes: #338559). -- Manoj Srivastava Sat, 3 Dec 2005 16:44:16 -0600 vm (7.19-7) unstable; urgency=low * Bug fix: "vm: doesn't use debconf for prompting", thanks to Lars Wirzenius. Hmm. We don't even have a /usr/lib/emacs/site-lisp/site-start.el anymore, and /etc/emacs/site-start.el has not mentioned vm-init since at least 2002, and probably a lot longer than that. The chances of someone still having a reference to vm-init in there are pretty low --- and even then, it should be handled silently. This work around was added in 1998; I doubt if such buggy systems still survive -- and if people have cruft lying around since 1998, and are trying to install vm after 7 years, well, there shall be issues. In any case, we still try to fix things silently, and we still issue a diagnostic. I just don't think this is worth a debconf note anymore. (Closes: #333297). -- Manoj Srivastava Sat, 22 Oct 2005 00:15:10 -0500 vm (7.19-6) unstable; urgency=low * Fix a FTBS bug due to the changed behaviour of texi2html. Also, use /usr/share/menu instead of /usr/lib/menu * Bug fix: "vm-mime-Q-encode-region dies if region ends with newline", thanks to Michael Ernst (Closes: #319821). -- Manoj Srivastava Mon, 8 Aug 2005 11:28:22 -0500 vm (7.19-5) unstable; urgency=low * Bug fix: "vm: does not start vm: vm-mouse-install-mouse fails", thanks to Daniel Martins. I am not sure why this works for me, but not for the reporter -- but an autoload costs little, so add one to the init function. (Closes: #309962). -- Manoj Srivastava Sat, 9 Jul 2005 14:21:48 -0500 vm (7.19-4) unstable; urgency=low * Bug fix: "vm: Please do not discriminate against XEmacs", thanks to Dirk Eddelbuettel. Well, back in the mists of time, VM was packaged to be byte-compiled for XEmacs, but the XEmacs maintainer at that time asked me to cease and desist. Times change, so that is reverted. (Closes: #306876). * Bug fix: "vm: purge doesn't", thanks to Ian Zimmerman. This should be better. (Closes: #303519). -- Manoj Srivastava Mon, 2 May 2005 23:57:59 -0500 vm (7.19-3) unstable; urgency=low * Bug fix: "vm: package description typo(s) and the like", thanks to Florian Zumbiehl (Closes: #300050). -- Manoj Srivastava Thu, 17 Mar 2005 20:10:30 -0600 vm (7.19-2) unstable; urgency=medium * vm-mime-display-external-generic does not quote spaces when calling external commands -- and since VM does not use mailcap, but instead uses vm-mime-external-content-type-alist, this fix is relevant. -- Manoj Srivastava Tue, 2 Nov 2004 14:32:58 -0600 vm (7.19-1) unstable; urgency=low * New upstream version. Excerpted changes: * New variables: + vm-stunnel-program-additional-configuration-file * added vm-mouse-send-url-to-safari to send URLs to Safari under Mac OS X. * added docstrings for vm-mime-reader-map-* commands. * normalized prefix key description layout in vm-mode docstring. * added some missing MIME commands to menu entries. * undo change in vm-preview-current-message that required vm-auto-decode-mime-messages to be non-nil along with vm-display-using-mime before creating the presentation copy of a message. It has the unexpected side-effect of breaking 'D' when vm-auto-decode-mime-messages is nil. -- Manoj Srivastava Thu, 30 Sep 2004 16:08:43 -0500 vm (7.18-9) unstable; urgency=low * Removed the obsolete needs="dwww" menu entry. Now we use the preferred doc-base method. * Bug fix: "vm: Can't cycle among decoded/summary/raw views of MIME messages", thanks to Reid Priedhorsky (Closes: #250559). -- Manoj Srivastava Tue, 22 Jun 2004 23:38:50 -0500 vm (7.18-8) unstable; urgency=low * Bug fix: "vm: wrong path in README.debian.gz", thanks to Diego Biurrun (Closes: #243377). -- Manoj Srivastava Tue, 20 Apr 2004 13:51:42 -0500 vm (7.18-7) unstable; urgency=low * Bug fix: "silent error while loading 50vm-init.el", thanks to Jeff Nye If vm-mime-default-face-charsets is unbound, set it to the default value. (Closes: #241074). -- Manoj Srivastava Fri, 2 Apr 2004 12:14:16 -0600 vm (7.18-6) unstable; urgency=low * Added 8859-15 to the list of charsets to display in the default face in vm. Also added a short README about mime handling in VM. -- Manoj Srivastava Sun, 14 Mar 2004 13:21:00 -0600 vm (7.18-5) unstable; urgency=low * removed dependency relationship with emacs20 * Bug fix: "vm: Please update Dependencies to exim4", thanks to Marc Haber (Closes: #228596). -- Manoj Srivastava Fri, 6 Feb 2004 03:17:03 -0600 vm (7.18-4) unstable; urgency=low * FTBFS: missing build-depends. Bah. The buildd's do not respect Build-Depends-Indep. Duplicated the dependency into Build-Depends as a workaround for this buildd flaw. (Closes: #224461). -- Manoj Srivastava Tue, 23 Dec 2003 13:29:22 -0600 vm (7.18-3) unstable; urgency=low * Move to the new build system, and the new SCM system. Now the source packages are full arch categories. * Bug fix: "/usr/bin/qp-decode: say program name on error output", thanks to Dan Jacobson. Do the same for base64-decode as well. (Closes: #222580). -- Manoj Srivastava Sat, 6 Dec 2003 00:28:22 -0600 vm (7.18-2) unstable; urgency=low * The last upload was corrupted. This is a major bugfix release. -- Manoj Srivastava Wed, 12 Nov 2003 23:15:14 -0600 vm (7.18-1) unstable; urgency=low * New upstream release. Excerpted changes: * New variables: + vm-default-new-folder-line-ending-type * vm-mail-internal: use idle timers to run vm-update-composition-buffer-name instead of post command hooks * vm-decode-mime-layout: always delete a MIME object button after doing a type conversion. * vm-mail-send: bind coding-system-for-write to match the coding system of mail-archive-file-name (if set) so that mail-do-fcc writes to the file using the correct line endings. * vm-make-tempfile-name, vm-make-tempfile: accept optional second argument 'proposed-filename' which will be used if a file with that name do not exist in vm-tempfile-directory. If such a file exists, then a number and a dash will be prepended to the proposed filename and the number will be incremented until no such file exists. * don't use vm-menu-fsfemacs-image-menu unless vm-use-menus is non-nil. * vm-preview-current-message: require vm-auto-decode-mime-messages to be non-nil along with vm-display-using-mime before creating the presentation copy. This helps prevent selection of the presentation buffer when the user likely needs to do M-x recover-file. -- Manoj Srivastava Tue, 11 Nov 2003 14:35:03 -0600 vm (7.17-1) unstable; urgency=low * New upstream. excerpted changes: * New commands: + vm-create-imap-folder + vm-delete-imap-folder + vm-rename-imap-folder * vm-edit-message-end: try to positoin the cursor in the message window roughly where it was in the edit window. * vm-read-imap-folder-name: allow vm-imap-make-session to return nil without crashing. Also, bind vm-imap-ok-to-ask non-nil so that vm-imap-make-session will interactively prompt for a password. * added menu entry to Folder menu for vm-visit-imap-folder. * vm-imap-normalize-spec: convert auth method to * instead of the IMAP folder name. * vm-imap-get-message-flags: fixed flag retrieval so that it actually works now. * vm-handle-file-recovery-or-reversion: find an IMAP spec for the buffer so that the spec is passed to the 'vm' command instead of the buffer-file-name. This fixes a wrong-type-argument error under M-x recover-file when done on a IMAP cache folder. * tapestry.el: in tapestery-window-edges check for existence of face-width and face-height in addition to window-pixel-edges. * search for BASE64/QP encoder/decoder programs and set the encoder/decoder program variable based on what we find. * vm-mf-default-action: if object is convertible to a displayble type mention the conversion that will happen in the action string. -- Manoj Srivastava Sun, 13 Jul 2003 15:57:12 -0500 vm (7.16-1) unstable; urgency=low * New upstream. excerpted changes: * New commands: + vm-visit-imap-folder + vm-visit-imap-folder-other-window + vm-visit-imap-folder-other-frame + vm-save-message-to-imap-folder * New variables: + vm-imap-server-list * vm-primary-inbox can now be a POP or IMAP mailbox specification. * vm-mime-set-xxx-parameter: use the parameter name passed in instead of assuming the name is "charset". The only calls to this function passed in "charset" as the name, so this bug wasn't affecting anything. * vm-decode-mime-encoded-words: do charset conversion if needed. Forgot to add this back when vm-mime-charset-converter-alist was added. * vm-send-mail-and-exit -> vm-mail-send-and-exit in vm-user-agent definition. * vm-mail-send-and-exit: dropped first arg requirement since the argument isn't used anyway. * compute POP cache filenames based on the POP mailbox spec with the access method as "pop" and the authentication method and port as asterisks. This prevents visiting the wrong file if the user starts accessing a POP mailbox through a different port or using a different access or authentication method. Automatically migrate the old cache files to the new scheme as we go. * fixed convert -page typos. * vm-set-redistributed-flag: fourth arg of vm-set-xxx-flag call corrected to be vm-set-redistributed-flag instead of vm-set-forwarded-flag. * IMAP BYE responses are always untagged; changed code to match. -- Manoj Srivastava Tue, 27 May 2003 12:26:50 -0500 vm (7.15-1) unstable; urgency=low * New upstream. excerpted changes: * Makefile: filter echo's output through tr to avoid CRs under Cygwin. * Makefile: Use '>' instead of '>>' on first write to vm-autoload.el to truncate the file otherwise it will grow each time it is updated. * vm-mime-attach-message: arrange for forwarded flag of each attached message to be set when the composition is sent. * vm-decode-mime-encoded-words: do charset conversion if needed. Forgot to add this back when vm-mime-charset-converter-alist was added. * when cropping images call 'convert' with -page to avoid having some kind of margin takcked on to the image. The strange margin seems to be applied to GIFs but not JPGs. No idea why. * fixed some defcustom variable declarations. * vm-mime-reader-map-save-file: return the file name to which the object was saved. * vm-mime-burst-digest: remove blank lines at the beginning of message/rfc822 bodies in a multipart/digest object, since they most likely indicate an improperly packed digest rather than a message with no headers. * vm-make-tempfile: use vm-octal to clarify file mode setting. * vm-make-image-strips: when building the script for incremental display, don't quote the filenames. DJGPP cmdproxy.exe doesn't interpret single quotes and using double quotes is pointless. VM's arguments to 'convert' don't need quoting anyway. * use vm-pop-check-connection to check POP connections before trying to read data from them. The checker will signal an error if the connection is closed or the process associated with the connection has exited. * use vm-imap-check-connection to check IMAP connections before trying to read data from them, The checker will signal an error if the connection is closed or the process associated with the connection has exited. -- Manoj Srivastava Sun, 4 May 2003 01:52:45 -0500 vm (7.14-1) unstable; urgency=low * New upstream. excerpted changes: * moved (provide ...) to bottom of .el files. * Made the vm-undo command undo everything the last command did. E.g. vm-undo after vm-kill-subject undoes all of the related deletes instead of just one of them. vm-undo-boundary is only called from vm-add-undo-boundaries now. vm-add-undo-boundaries is called from post-command-hook. -- Manoj Srivastava Sat, 29 Mar 2003 00:07:15 -0600 vm (7.13-1) unstable; urgency=low * New upstream. excerpted changes: * vm-pop-make-session: use new stunnel configuration code introduced in VM 7.11. This was only installed in vm-imap-make-session previously. * create MIME layout from plist instead raw vector. layout strut is still a vector. * save original layout when doing a layout conversion so that if the object needs to be deleted we still ahve the correct object endpoint in the folder buffer. In the old code the endpoints in the converted object buffer would be used in the folder buffer with disastrous results. * '(vm-marker -> (vm-marker in vm-mime-parse-entity. -- Manoj Srivastava Wed, 19 Mar 2003 22:59:38 -0600 vm (7.11-1) unstable; urgency=low * New upstream. excerpted changes: * New variables: + vm-mime-forward-local-external-bodies * vm-mime-fsfemacs-encode-composition: if object is in a buffer, write the buffer out to disk and insert the file contents instead of copuying buffer to buffer. This avoids the trademark \201 data corruption. * vm-su-thread-indent: check for vm-summary-show-threads non-nil before calling vm-th-thread-indentation. * vm-summary-compile-format-1: added %(..%) format groups. * don't forward Content-Length header. * use results of CAPABILITY command to check for authentication methods before trying to use them. * use results of CAPABILITY command to decide whether to use BODY.PEEK vs. RFC822.PEEK. * vm-mime-attach-object-from-message: move window point to beginning of the line after the inserted attachment if the compositoin buffer is being displayed in a window. * vm-mime-parse-entity-safe: set c-t-e to "7bit" if it is nil. * vm-mime-fetch-url-with-programs: erase the work buffer between tries of various URL fetch programs; this handles the case where an URL fetcher outputs part of the data and then dies. * added support for the `fetch' and `curl' URL fetch programs for message/external-body. * vm-mime-fsfemacs-encode-composition: call vm-mime-parse-entity twice for already MIME'd objects. vm-mime-xemacs-encode-composition similarly modified. * vm-mime-fsfemacs-encode-composition: don't automatically base64-encode non-composite non-text objects that already have MIME headers. Use vm-mime-transfer-encode-layout on them instead to produce the correct encoding. vm-mime-xemacs-encode-composition similarly modified. * dropped support for url-w3 retrieval method. It's interface too crusty to continue using given the wide availabity of external programs that do the job. * vm-mime-display-internal-message/external-body: pulled retrieval guts out and put into vm-mime-retrieve-external-body. * added support for simple image manipulations, supported by Imagemagick's `convert' program. Use mouse button 3 on an image to see what you can do. * added Konqueror to vm-menu-url-browser-menu. * added option to send to the X clipboard to vm-menu-url-browser-menu. * vm-menu-url-browser-menu: add third element to clipboard and Konqueror entries--- VM's menu code under GNU Emacs requires it. * treat device-type `gtk' like `x' under XEmacs so that VM running on GTK-XEmacs will use window system features. * vm-imap-move-mail: set use-body-peek after retrieving the CAPABILITY results. (oops) * Makeflie: default install target now installs the .el files. * added support for version 4 of stunnel. * fixed check for usability of uncompface's -X flag, needed symbol to be unquoted. * fixed check for stunnel 4, check for non-zero exit code instead of string, moved check to the time when stunnel is first run. * vm-stunnel-configuration-args: fixed reversed v3/v4 logic. * vm-stunnel-configuration-file: reuse the stunnel configuration tempfile. * vm-parse: fourth arg limits the number of matches before returning. * vm-parse: after we quit matching add everything after the last match to the list that is returned, but do this ONLY if the fourth arg 'matches' was specified. * compute POP cache filenames based on the POP mailbox spec with the password as an asterisk. This prevent visiting the wrong file if the user has the password in the spec and later changes their password. Automatically migrate the old password-based cache files to the new scheme as we go. * vm-pop-make-session: parse POP mailbox spec in a way that permits colons in the user's password. * install .el files before .elc files to avoid "source file newer than compiled file" problems. * added ] to char class exclusion in mailto spec in vm-url-regexp to help with MS EXchange's [mailto:foo] syntax. -- Manoj Srivastava Thu, 13 Mar 2003 09:22:46 -0600 vm (7.08-2) unstable; urgency=low * Suggest mime-codecs. closes: Bug#181776 -- Manoj Srivastava Thu, 20 Feb 2003 11:02:50 -0600 vm (7.08-1) unstable; urgency=low * New upstream. excerpted changes: * New variables + vm-mime-ignore-missing-multipart-boundary + vm-url-browser-switches * vm-mime-attach-object-from-message: decode object after stuffing it into the work buffer. Two reasons: (1) the composition encoding code doesn't expect base64 or QP encoded objects and will encode them again, and (2) we shouldn't trust that the original object was encoded properly so we should re-encode it since we're sending it. * vm-mime-display-internal-multipart/alternative: a badly formed mesage may cause VM to find no message parts so don't call vm-decode-mime-layout unless best-layout is non-nil. * vm-su-subject: compress \n[ \t]* to a single space. * README: Added (vm) to the example VM entry in the 'dir' file. Apparently the old entry won't work without it anymore. * vm-mime-parse-entity-safe: error/error MIME layout needs to be length 16; added a nil. Really need to macroize creation of the layout object someday. * vm-recover-file: call recover-file with call-interactively instead of apply. * vm-revert-buffer: call revert-buffer with call-interactively instead of apply. * vm-decode-mime-layout: check if layout has been converted and don't try to convert it again if so. * vm-vs-or, vm-vs-and: check existence of selector function and signal error if not found. * vm-md5-region: accept " -" and " *-" before the md5 checksum because md5sum stupidly produces extra output on some systems. * vm-imap-end-session: trying reading the response to the LOGOUT command and see if we start hanging in some environments. * vm-imap-make-session: don't query for passwor dif the authentiation method is "preauth". * vm-visit-virtual-folder: select the message corresponding to the real message the user used as a basis for this folder, if there was one. Only honor the vm-jump-* variables if there's no correspoinding real message to use. * vm-compose-mail: run mail-citation-hook or mail-yank-hooks or the normal VM default action after yanking the message text. Always position point in the body before running the yank action. Don't assume the yank action is smart enough to position point correctly before inserting the text. * vm-recognize-imap-maildrops,vm-recognize-pop-maildrops: changed regexp to allow colons in the last field. * dropped single quotes in const choice values in defcustom for vm-mime-alternative-select-method. * Makefile: use \015 instead of \r with tr due to bug in Solaris 8's tr which removes r's. * vm-get-mail-itimer-function: correct use of timer-set-time; set new firing time to now + vm-auto-get-new-mail instead of now with a delta of vm-auto-get-new-mail, to avoid having the timer expire repeatedly in the same second. Similar change in vm-check-mail-itimer-function which support vm-mail-check-interval. Similar change in vm-flush-itimer-function which supports vm-flush-interval. * vm-decode-mime-message: vm-preview-read-messages -> vm-preview-lines so that message previewing is turned off for the 'raw' and 'all buttons' displays. * vm-mail-send: bind select-safe-coding-system-function to nil during call to mail-send to prevent Emacs from prodding user about the FCC coding system. The coding system used should be raw-text and VM sets buffer-file-coding-system to that. * vm-stuff-attributes: don't clear modflag if stuffing for another folder, since the information stuffed in that case is missing the deleted flag if that flag was set. * use defconst to set vm-faked-defcustom so that the checking works correctly if vm-vars.el is loaded twice. * vm-mime-parse-entity: find multipart boundaries, then recurse into parts. This satisfies the new rule in RFC 2046 that outer level multipart boundaries be recognized at any level of inner nesting. * vm-mime-send-body-to-file: removed let-binding of variable file which was shadowing the function parameter of the same name. This should make the function not ask about a filename even when one has already been provided. * define vm-folder-history as a function that returns t so that when it is passed as the sixth arg to read-file-name under Emacs 21 it does not cause void-function to be signaled when completion is attempted. * vm-mime-send-body-to-folder: force conversion to target folder's type since the user doesn't know what type we're using in the temp folder. * vm-save-message: dno't try to honor vm-delete-after-saving if the folder is read-only. * vm-delete-duplicate-messages: compute hash on real folder contents rather than virtual copy. Fixes utterly brokwn behavior when run on a virtual folder. -- Manoj Srivastava Mon, 17 Feb 2003 21:35:00 -0600 vm (7.07-5) unstable; urgency=low * Remove old emacs19 directory closes: Bug#179682 -- Manoj Srivastava Mon, 10 Feb 2003 10:03:46 -0600 vm (7.07-4) unstable; urgency=low * Make sure ucf database is cleaned up on purge -- Manoj Srivastava Sun, 10 Nov 2002 22:03:39 -0600 vm (7.07-3) unstable; urgency=low * Make sure the log file is user readable closes: Bug#167791 -- Manoj Srivastava Wed, 6 Nov 2002 03:20:07 -0600 vm (7.07-2) unstable; urgency=low * Also install vm.html closes: Bug#161086 * Make sure that the uncompiled .el files are still in the load-path, though close tothe end. closes: Bug#155043 -- Manoj Srivastava Tue, 29 Oct 2002 18:09:05 -0600 vm (7.07-1) unstable; urgency=low * Use which, not command -v. * New upstream. excerpted changes: * vm-sort-messages: move first call of vm-update-summary-and-mode-line out to callers. Threading boks if we call it in here. * vm-assimilate-new-messages: resume calling vm-update-summary-and-mode-line to clear the decks before thread sorting. * vm-toggle-threads-display: start calling vm-update-summary-and-mode-line to clear the decks before thread sorting. * vm-save-folder,vm-write-file: support vm-default-folder-permission-bits here, since a folder might be created when it is saved. * vm-save-message,vm-save-message-sans-headers: use the target folder's line ending coding system for saves. If the target doesn't exist use the local system's default. * vm-write-string: don't set an explicit coding system for writes, use the ambient value. * vm-sort-messages: call vm-update-summary-and-mode-line to clear the decks before sorting. * vm-mail-internal: UNder FSF Emacs set the coposition buffer coding system to 'raw-text' which should stop write-region from question the coding system inside mail-do-fcc. -- Manoj Srivastava Thu, 13 Jun 2002 15:40:00 -0500 vm (7.05-1) unstable; urgency=low * New upstream bug fixing release. Excerpted change: * New variables: + vm-default-folder-permission-bits * Makefile: added install-el target. * always set mode-popup-menu; it's value should not depend on the value of vm-popup-menu-on-mouse-3. * vm-stuff-folder-attributes: added status messages. * vm-mime-discard-layout-contents: call vm-set-modflag-of on the modified message. * vm-preview-composition: add a newline at end of the preview buffer if the composition lacks one. * vm-url-decode-buffer: fixed brain-o; bind case-fold-search to t instead of nil. * use new vm-octal function instead of writing out UNIX permission bits in decimal. * defcustom :type fixes. * added "image" to default value of vm-auto-displayed-mime-content-types. * vm-mime-should-display-internal: ignore Content-Disposition as it has no bearing on whether an object is displayed internally. * vm-assimilate-new-messages: build threads very early if vm-summary-show-threads is non-nil. Don't run vm-update-summary-and-mode-line before sorting threads--- this should no longer be necessary thanks to the change to to vm-set-numbering-redo-start-point. * vm-set-numbering-redo-start-point: compare message structs instead of list conses. * vm-unthread-message: only unthread if threads have been built in a particular message's buffer. * vm-thread-list: keep track of the youngest member of a thread. * vm-sort-compare-thread: sort threads by youngest member instead of by oldest member. Also sort thread siblings by date instead of by message-id; sort by messge-id if dates are equal (rare). -- Manoj Srivastava Sun, 12 May 2002 23:13:27 -0500 vm (7.04-2) unstable; urgency=low * Override the lintian warning about postinst not setting user doc link for mime codecs. -- Manoj Srivastava Mon, 22 Apr 2002 08:44:00 -0500 vm (7.04-1) unstable; urgency=low * New upstream version. Excerpted changes: * New commands: + vm-mime-attach-object-from-message (bound to $ a) * New variables: + vm-mime-ignore-composite-type-opaque-transfer-encoding * fixed problem with a repeated char being displayed after an X-Face when a non-MIME message is reselected. * Makefile: remove CRs from the output of make-autoloads. Emacs when run under Cygwin apparently emits them. * vm-session-initialization: create gui-button-face under XEmacs if it does not exist. * vm-mime-display-internal-text/html: don't use W3 if vm-mime-use-w3-for-text/html is nil. * recognize 'mac' as a window system with mouse, image, and multi-font support (FSF Emacs only). * put vm-update-composition-buffer-name on post-command-idle-hook instead of post-command-hook if the idle hook is available for use. * vm-menu-vm-menu: added commas to variable refernece so they would be evalled in the backquote context. * changed hook defcustoms to use 'hook instead of '(list function). * vm-read-index-file: do thread sort if necessary since vm-assimilate-new-messages isn't going to do it. * default vm-thread-obarray and vm-thread-sort-obarray to non-nil values so that if they are used as obarrays before initialization an error will be signaled. * vm-mime-pipe-body-to-queried-command: prompt with "Pipe object to command:" instead of "Pipe to command:". * make sure select-message-coding-system is fbound before overriding its definition. Apparently early Emacs 20 versions do not define it. * vm-imap-read-object: move point past closing double quote to fix parsing problem that caused VM to hang. * vm-mime-display-button-xxxx: always insert the button, even we have no method for displaying the MIME object. -- Manoj Srivastava Sun, 21 Apr 2002 04:46:16 -0500 vm (7.03-1) unstable; urgency=low * fixed defcustom syntax errors. * minor compiler error cleanup. -- Manoj Srivastava Wed, 6 Mar 2002 00:46:29 -0600 vm (7.01-5) unstable; urgency=low * debian-pkg-add-load-path-item apparently does not add the item to the load path. This is different from the test function that Sam wrote, and thuis the load-path was not set. Unfortunately, this bug was masked on my box since emacs21 happily searches subdirs. -- Manoj Srivastava Wed, 20 Feb 2002 02:34:21 -0600 vm (7.01-4) unstable; urgency=low * Preserve user changes in the site-start.d file. Also, do not delete the start file when removed, only when purged. This also requires that the start file do nothing when the package has actually been removed. -- Manoj Srivastava Wed, 13 Feb 2002 22:41:26 -0600 vm (7.01-3) unstable; urgency=low * With smtpmail in modern emacsen, we do not depend on external MTA's. -- Manoj Srivastava Sat, 2 Feb 2002 20:30:27 -0600 vm (7.01-2) unstable; urgency=low * Conform to the latest emacs policy about laod paths. -- Manoj Srivastava Fri, 1 Feb 2002 15:35:51 -0600 vm (7.01-1) unstable; urgency=low * New upstream version. Excerpted changes: * New variables: + vm-mime-use-w3-for-text/html * new possible values for vm-mime-alternative-select-method: (favorite ...) and (favorite-internal ...). * vm-visit-pop-folder: use value of vm-last-visit-pop-folder if interactive user entered an empty string as the folder. * vm-mail-send: bind sendmail-coding-system to the binary coding system and bind mail-send-nonascii to t so that mail-send will leave us alone. * redefine select-message-coding-system if it is fbound and we're running FSF Emacs MULE. It doesn't like no-conversion as a coding system, so we get it out of the way. * define vm-image-too-small properly as an error condition. * vm-scroll-forward-one-line, vm-scroll-backward-one-line: accept a numeric prefix arg. * vm-setup-ssh-tunnel: use copy-sequence on vm-ssh-program-switches to avoid corrupting the list tail with nconc. * vm-mime-can-convert-0: always return the conversion that produces an internally displayable type if there is one. Fallback to the externally displayable type if there is none that can be displayed internally. * vm-mime-can-convert-0: don't return a match when the target type matches the original type. * vm-mime-display-internal-image-xemacs-xxxx: wrap image extents around spaces instead of newlines. Adjust newline insertion code accordingly. Create image strips twice the default font height to avoid having to match the font ascent value. Don't use vm-monochrome-face except on XBM images. * vm-display-image-strips-on-extents, vm-display-some-image-strips-on-extents: Don't use vm-monochrome-face except on XBM images. * support completion-ignore-case variable. * block interactive use of vm-expunge-pop-messages in a POP folder. It's meant for folder linked to POP spool files, not POP folders. * use display-planes function to determine if Emacs 21 is running on a "colorful" display. * put image/xpm ahead of image/pbm in vm-mime-image-type-converter-alist. * vm-parse-date: find year even if it's at the end of line. -- Manoj Srivastava Thu, 24 Jan 2002 20:26:03 -0600 vm (7.00-1) unstable; urgency=low * Add a patch from Ian Jackson that creates a new interactive virtual folder selector `sexp', which prompts for an string, asking for an S-expression. You type in a string, which gets turned into a LISP object with `read', and used as the actual selector. closes: Bug#122450 * New upload fixes image display bug for emacs21. closes: Bug#123990 * New upstream version. Excerpted changes: * New commands: + vm-visit-pop-folder + vm-visit-pop-folder-other-window + vm-visit-pop-folder-other-frame * New variables: + vm-pop-folder-alist + vm-pop-folder-cache-directory * vm-parse-date: fixed search to allow monthday digits to occur at the beginning of a string. * vm-get-mail-itimer-function: skip buffer if bm-block-new-mail is set. This avoids vm-get-spooled-mail signaling "can't get new mail until you save this folder" later. Also check for mail block and folder read-only before doing the expensive file stat checks. * vm-get-image-dimensions: don't search for the filename in the 'identify' output. Apparently 'identify' will sometimes substitute a different filename than we expect. Instead just search for a space and then start looking for the image dimensions from that point. * moved setting of vm-folder-type in the POP trace buffer from vm-pop-move-mail to vm-pop-make-session so that all callers get of vm-pop-make-session get the feature. * vm-assimilate-new-messages: check for new-messages non-nil before attempting some things. Makes the function a bit more efficient if we call it and no new messages are found. * vm-pop-report-retrieval-status, vm-imap-report-retrieval-status: report "post processing" if 'need' value is nil. * vm-pop-retrieve-to-crashbox -> vm-pop-retrieve-to-target * vm-imap-retrieve-to-crashbox: use new "post processing" reporting. * vm-pop-retrieve-to-target: use new "post processing" reporting. * vm-expunge-pop-messages: record which messages were expunged by stuffing nil into the car of the cell in vm-pop-retrieved-messages. At the end strip out all the nils, leaving the data for messages that we had problems expunging from the POP server. * in vm-stuff-* functions check for vm-message-list non-nil instead of vm-message-pointer. * vm-pop-end-session: check whether the process is still open or running before attempting to send the QUIT command. Also check whether the process buffer is still alive before killing it. * vm-get-spooled-mail: gutted, with most of it going into vm-get-spooled-mail-normal. Calls vm-pop-synchronize-folder for folders that use the POP access method. * vm-session-initialization: when deciding whether to create the vm-image-placeholder face check for image-type-available-p being fbound, not vm-image-type-available-p. * use instead of as the name of the faces used to display images under Emacs 19 and 20. * vm-mime-display-internal-image-xemacs-xxxx: insert a newline before the image if point is at the same position as the beginning of the text portion of the message. Otherwise there is no visible separation between the image and the message headers. * vm-pop-report-retrieval-status, vm-imap-report-retrieval-status: record in the statblob the fact that some status was reported. * vm-pop-stop-status-timer, vm-imap-stop-status-timer: if any status was reported, do (message "") to clear the echo area. -- Manoj Srivastava Sun, 16 Dec 2001 22:55:56 -0600 Old Changelog: vm (6.98-1.0.1) unstable; urgency=low New feature: * Interactive vm-create-virtual-folder has a new selector type `sexp' which lets you type in a selector of your own as a LISP expression (which will not be eval'd). Eg, V C sexp RET (not (header "X-RBL-Warning")) RET -- Ian Jackson Tue, 4 Dec 2001 20:43:32 +000 vm (6.99-1) unstable; urgency=low * New upstream version. Excerpted changes: * New commands: + vm-scroll-forward-one-line + vm-scroll-backward-one-line * New variables: + vm-imagemagick-identify-program + vm-mime-display-image-strips-incrementally * vm-do-folders-summary: bind default-directory to the directory names when checking for subdirectories amongst its children with vm-delete-directory-names. * vm-get-image-dimensions: use the ImageMagick program 'identify' instead of 'convert' to get the image dimensions. * vm-thread-list: set done to t if we've run out of references and we're not threading by subject (vm-thread-using-subject == nil). Fixes infloop. * use the vm-monochrome-image face for image glyphs instead of vm-xface under XEmacs. * use a face with a background stipple (vm-image-placeholder) on the spaces used to display images in FSF Emacs 19. * vm-display-image-strips-on-overlay-regions: store modified flag value after the process buffer is selected, otherwise we're recording the state of the wrong buffer. * vm-mime-display-internal-image-fsfemacs-21-xxxx: If the image strip is the same height as the font the image ascent ratio must match font ascent ratio else the image strips will be displayed with gaps between them. There's currently no way to get font ascent information under Emacs 21. Use strips that are twice the font height and a 50/50 ascent ratio to avoid this problem. * vm-make-image-strips: remainder math was wrong, fixed Use new remainder math in the sync branch. Use vm-make-tempfile instead of vm-make-tempfile-name. * when cutting images into strips give 'convert' an explicit target type. Otherwise it might choose some unknown new type that Emacs can't display. * vm-parse-date: simplified the search for the monthday and the year, hopefully reducing the problems with confusing 2-digit years and monthdays. * vm-thread-list: check and set 'oldest-date property on all the messages. * vm-mail-internal: eval the value of mail-signature and insert the result if its value is not nil, t or a string. Also, if mail-signature is a string, subject the result to the same check for a proper signature separator. * The new sources are actually in the package. closes: Bug#120476 * Also set vm-image-directory to the images location closes: Bug#120494 -- Manoj Srivastava Sat, 1 Dec 2001 20:37:41 -0600 vm (6.98-1) unstable; urgency=low * New upstream version. Excerpted changes: * New variables: + vm-mime-use-image-strips + vm-imagemagick-convert-program + vm-mime-charset-converter-alist * inline image display support for Emacs 19 and Emacs 20. * vm-md5-region: deal with the " -\n" that md5sum appends to the checksum output when summing stdin. * vm-edit-message: set buffer-offer-save to t so that if user types C-x C-c they won't lose their changes in the message edit session without warning. * vm-spool-files: remove any directories from vm-spool-files that we slurped from environmental variables. There was a case where a user's MAIL variable was set to /var/mail. I don't know how widespread this practice is. * when initializing vm-temp-file-directory check for C:\TEMP before C:\. * vm-setup-ssh-tunnel: instead of sleeping for a bit and hoping that's long enough to establish a connection, read some output from the tunnel before returning so we know that the connection is established. vm-ssh-remote-c0mmand has to provide the output, so its default value has been changed to produce output. * vm-frame-loop: don't reset the starting frame placeholder unless the starting frame was really deleted. Fixes an infloop when quitting out of VM and the VM summary is visible in multiple frames. * try to use the ImageMagick 'convert' program (if available) to convert image types that Emacs can't display internally into images that Emacs can display. * support the unregistered image/xbm, image/xpm and image/pbm types, so that we can autoconvert unsupported image types to these types under an Emacs that's compiled with minimal image support. * use w3m to retrieve URLs if specified in vm-url-retrieval-methods. * make layout cache be the property list of a symbol instead of an alist. * use vm-make-tempfile in more places to produce private tempfiles instead of vm-make-tempfile-name. * vm-preview-composition: mnuge message separators that appear in the message body. Use MMDF for the temp folder type. * all your base no longer are belong to us. -- Manoj Srivastava Tue, 20 Nov 2001 09:34:36 -0600 vm (6.97-3) unstable; urgency=low * Fixed minor typo in the long description. closes: Bug#118770 -- Manoj Srivastava Tue, 13 Nov 2001 15:15:13 -0600 vm (6.97-2) unstable; urgency=low * vm now allows emacs21 to fill the dependency. closes: Bug#117664 -- Manoj Srivastava Fri, 2 Nov 2001 02:42:47 -0600 vm (6.97-1) unstable; urgency=low * Added emacs21 to the list of known emacsen (I ahve beeen using it with the pre releases) * Fixed typo in description. closes: Bug#115819 * Remove files created on the fly as well. closes: Bug#117140 * New upstream version. Excerpted changes: * New variables: + vm-mime-require-mime-version-header * SSL support for IMAP and POP. * SSH tunnel support for IMAP and POP. * uninstall toolbar goop from vm-mode-map under FSF Emacs if we're creating a frame and vm-use-toolbar is nil. * don't use a heuristic background map in the toolbar image spec for the MIME icon. * vm-make-tempfile-name: add a random elemnt to VM's temporary file name. * vm-pop-cleanup-region, vm-imap-cleanup-region: don't emit CRLF->LF status messages. Say something about post-processing in the normal status message instead. * vm-mail-to-mailto-url: do session initialization stuff so that the function can be called from gnuclient. This is apparently useful for driving VM from a web browser that allows use of an external mailer. * vm-mime-encode-composition: undo buffer changes if an error occurs during encoding. * rename certain composition buffers on the fly as the recipient headers change to reflect the new primary recipient(s). * vm-submit-bug-report: call vm-session-initialization so the all necessary goop is loaded, rather than doing a few 'require' calls. This fixed the bug in the VM XEmacs package where calling vm-submit-bug-report immediately after starting XEmacs would cause (void-function vm-display) to be signaled. * vm-th-parent: when extracting the parent message ID from the In-Reply-To header, use the longest ID found, instead of the first ID found. Store the result in the references slot in the message struct, since that slot must be empty otherwise we would be ignoring In-Reply-To. * vm-thread-list: remove the clock skew loop-recovery-point heuristic; seems to cause more breakage than it fixes. * vm-mime-display-internal-image-fsfemacs-xxxx: use a unibyte buffer as a work buffer when unpacking an image file. Apparently needed to avoid the evil \201 corruption under Emacs 21. * accept 'name' parameter as suggested filename for all MIME types. Old broken software that sends this stuff will never go away and complaints about it will never end. * default vm-use-lucid-highlighting non-nil only if (require 'highlight-headers) doesn't signal an error. * vm-md5-region: call the MD5 program directly instead of using sh -c. * vm-pop-md5: call the MD5 program directly instead of using sh -c. * vm-check-for-spooled-mail, vm-get-spooled-mail: bind case-fold-search to nil for comparisons against vm-recognize-*. -- Manoj Srivastava Mon, 29 Oct 2001 10:56:17 -0600 vm (6.96-1) unstable; urgency=low * New upstream version. Excerpted changes: * print-autoloads: handle fset calls. There are paths through the code that reach functions that are to be defined by fset but lack autoload definitions. print-autoloads now creates autoload definitions for them. * vm-mime-encapsulate-messages: pluralization fix in MIME digest preamble. Don't output "messages" if there's only one message in the digest. * vm-display-startup-message: update copyright date. Use \251 under XEmacs to show the c-in-circle copyright glyph. Can't rely on FSF Emacs being setup to display it. * vm-mime-display-internal-application/octet-stream: honor setting of vm-mime-delete-after-saving. * vm-imap-move-mail: don't emit warning messages if BODY.PEEK fails--- no one cares. Don't retry BODY.PEEK after it fails the first time, it will never work. Use RFC822.PEEK henceforth within this IMAP session. * vm-toolbar-support-possible-p: check whether the variable tool-bar-map is bound. Apparently tool-bar-mode is fboun even when there is no toolbar support (e.g. under Windows). * moved guts of vm-discard-cached-data to vm-discard-cached-data-internal. * vm-mime-attach-message: corrected prompt in the "attach from other folder" case. * vm-summary-sprintf: decode encoded words in the final string if we're not producing a tokenized result and vm-display-using-mime is not nil. * vm-mail-to-mailto-url: support full RFC2368 mailto URL spec. * vm-pop-send-command: use one process-send-string call instead of two, which should saves some packet overhead at the expense of more string consing. * vm-imap-send-command: use one process-send-string call instead of three, which should saves some packet overhead at the expense of more string consing. * vm-imap-send-command: allow sending a string without a tag. Also allow sending a string with a caller specified tag. * vm-imap-make-session: don't send a tag with the CRAM-MD5 challenge response. * vm-do-summary: reuse the mouse-track overlays if possible, instead of generating a new one each time. The old ones apparently are never reclaimed by Emacs until the buffer is killed and degrade editing performance in that buffer. * vm-imap-ask-about-large-message: require simple "OK" response after fetching headers instead of "OK FETCH". The "FETCH" part may never come and isn't required. * vm-save-folder: sweep though virtual folder associated with the real folder and set their buffer modified flags to nil if they are none of their real folders are modified. * vm-thread-list: don't the first and last element of a multielement thread list to be the same message-ID. This is a thread loop that previously was previously undetected. * vm-thread-list: remember the position in the thread list where we first threaded using subject information and reset the thread list to that point if we encountered a message ID we've seen before. This is a heuristic to try to trim off parents-by-subject that are only parents due to clock skew. -- Manoj Srivastava Sat, 8 Sep 2001 01:52:17 -0500 vm (6.95-1) unstable; urgency=low * Fixed the info install and remove sectrions for vm. closes: Bug#106847 * New upstream version. * Excerpted changes: * New variables: + vm-mime-attachment-auto-suffix-alist * vm-guess-digest-type: require a line consisting of 30 dashes in addition to the 70 dashes line before guessing RFC 1153. * vm-md5-region: add third arg that prevents re-search-forward from signalling an error if it fails. * vm-toolbar-update-toolbar: don't use the 'getmail' icon as the helper button if 'getmail' is already on the toolbar. * vm-toolbar-update-toolbar: don't use the 'mime icon as the helper button if 'mime' is already on the toolbar. * vm-mime-attach-message: if invoked on marked messages (C-c C-v M N C-c C-m) attach the marked messages in the parent folder as a digest. * vm-mail-mode-remove-tm-hooks: remove global TM/SEMI hooks from mail-setup-hook and mail-send-hook if vm-send-using-mime is non-nil. Previously VM tried to remove the hooks locally but that doesn't work. * fixed negative Content-Length computation problem - vm-find-leading-message-separator, vm-find-trailing-message-separator: new type 'baremessage means go to point-max. - vm-pop-retrieve-to-crashbox, vm-imap-retrieve-to-crashbox: use 'baremessage as old type during header conversion. Narrow to region around message during this conversion so that folder traversal functions can safely go to point-max without moving past the end of the message. * vm-pop-make-session, vm-imap-make-session: don't sleep for 2 seconds after reporting a bad password unless the function was called synchronously, i.e. not from a timer. * vm-check-mail-itimer-function, vm-get-mail-itimer-function, vm-flush-cached-data: when traversing the buffer list, check whether a buffer is still alive before selecting it. Because the loop calls input-pending-p, a timer or process-filter could have killed one of the buffers. * vm-delete-duplicate: remove duplicate addresses case insensitively This is still sort of wrong, in that the only the right hand side of the address should be treated this way. But doing the right thing is hard. * vm-mime-display-internal-image-xemacs-xxxx: make the image extent be 'start-open' so that it is moved forward when text is inserted at its position. This fixes the image doubling problem if a mssage containing only an image is previewed with vm-mime-deocde-for-preview set non-nil. * vm-narrow-for-preview: added kludge to prevent images and button art from being displayed at the edge of a preview cutoff during MIME decode-for-preview. Everything beyond the cutoff is shifted forward one character during MIME preview. (XEmacs only for now, but might be needed for FSF Emacs 21). * vm-mime-encapsulate-messages, vm-rfc934-encapsulate-messages, vm-rfc1153-encapsulate-messages: do a better job of protecting MIME headers. Sort the MIME headers to the top of the message then skip past them before applying the user's header filter variables. -- Manoj Srivastava Mon, 30 Jul 2001 13:10:01 -0500 vm (6.94-2) unstable; urgency=low * Remove cross pollution between vm and mime codecs. closes: Bug#106032 * Updated the long description to be in line with the current state of VM documentation: up to date. -- Manoj Srivastava Sun, 22 Jul 2001 23:37:54 -0500 vm (6.94-1) unstable; urgency=low * New upstream version. * Excerpted changes: * in the defconst of vm-menu-mime-dispose-menu, check whether a non-string s-expression is allowed as a menu element name before trying to use one. Versions of XEmacs prior to 21.4 don't allow expressions as item names. -- Manoj Srivastava Fri, 13 Jul 2001 12:28:07 -0500 vm (6.93-1) unstable; urgency=low * New upstream version. * Excerpted changes: * New variables: + vm-folder-file-precious-flag * added CRAM-MD5 as an authentication method for IMAP. * vm-su-do-date: interpret 2-digit years in the RFC-822 matching case as 20XX if year starts with 0-6. * vm-rfc1153-or-rfc934-burst-message: skip spaces in addition to newlines that occur after a separator line. A digest has been observed with that kind of deformity. * treat enable-local-eval as we do enable-local-variables--- always bind it to nil. * vm: don't bind vm-auto-decode-mime-messages non-nil during initial message preview if it is nil. * vm-mime-display-internal-text/html: dropped (sleep-for 2). No one cares enough about the "Need W3 to inline HTML" message to wait 2 seconds afterward. * added menu entry to allow MIME objects to be converted to another type and displayed. The new type is determined by vm-mime-type-converter-alist. * added koi8-r to vm-mime-mule-charset-to-coding-alist (XEmacs only). * vm-pop-read-list-response: check for nil return of vm-pop-read-response before using return value. * vm-pop-read-stat-response: check for nil return of vm-pop-read-response before using return value. * vm-encode-coding-region: use unwind-protect to make sure (well more likely) that the work buffer always gets killed if it has been created. * vm-decode-coding-region: use unwind-protect to make sure (well more likely) that the work buffer always gets killed if it has been created. * vm-mime-convert-undisplayable-layout: put object buffer on garbage list sooner to make rarer the situation where the buffer never gets deleted. * Makefile: remove function definition of vm-its-such-a-cruel-world after it is run. * vm-md5-region: if vm-pop-md5-program exits non-zero, signal an error. Also if the work buffer is not at least 32 bytes long, signal an error. This prevents naive callers from assumption all is well and using a possibly empty string as an MD5 hash. * vm-md5-region: check the MD5 digest returned for non-hex-digit characters and signal an error if any are found. * vm-get-file-buffer: use find-buffer-visiting if it is fbound. * vm-build-threads: fixed loop that removed child messages from a parent when better information about a child's parent is found. Previously the loop attempted to remove the same message from the parent over and over. * vm-build-threads: gather thread data using References and In-Reply-To for all messages before using the Subject header. This helps prevent the case where References says A is the parent of B but because of clock skew B is older than A, which can lead to B being considered the parent of A if A and B have the same subject and vm-thread-using-subject is non-nil. -- Manoj Srivastava Wed, 4 Jul 2001 14:31:49 -0500 vm (6.92-1) unstable; urgency=low * New upstream version. This version fixes the problem with attachments, closes: Bug#93447, Bug#86066 * No longer depend on emacs19. closes: Bug#82679 * Excerpted changes: * vm-imap-check-mail: throw to 'end-of-session instead of 'done. Fixes problem of vm-spooled-mail-waiting not being set. * vm-su-do-recipients: If there is no To or Apparently-To header, use Newsgroups if available. * vm-mime-display-external-generic: use a unibyte temp buffer for base64 decoding if using FSF Emacs MULE. Otherwise our old friend \201 crashes the party. * vm-mime-find-leaf-content-id-in-layout-folder: add missing layout argument to vm-mime-find-leaf-content-id. * vm-mime-parse-entity: fixed regexps that match an empty content description so that they match descriptions that only contain spaces. * vm-su-do-date: make +/- mandatory in the numeric tiemzone spec. First digit of numeric timezone spec must be 0 or 1. * vm-fill-paragraphs-containing-long-lines: ignore errors generated by fill-paragraph. * moved the code that catches the font-lock search bound error from the XEmacs MIME composition encoder to the FSF Emacs encoder. * vm-mime-charset-internally-displayable-p: allow variable vm-mime-default-face-charsets to apply to MULE-enabled Emacs and XEmacs. -- Manoj Srivastava Mon, 16 Apr 2001 08:55:30 -0500 vm (6.91-1) unstable; urgency=low * Added Lintian overrides, so that the postinst not setting the symlink warning should be gone. * New upstream version. Excerpted changes: * vm-mime-can-display-internal: check charset to verify that we can display it when checking text/html. * vm-auto-archive-messages: hide value of last-command when calling vm-save-message. * vm-mime-find-leaf-content-id: removed second arg in call to vm-mm-layout-id since it only accepts one argument. * vm-mime-transfer-encode-region: \\n -> \n in armor-dot check regexp string. * vm-mime-parse-entity-safe: dropped (sleep-for 2). No one cares about syntax errors. * vm-mime-base64-encode-region: if call to base64-encode-region fails with wrong-number-of-arguments error call it with only two args and do the B encoding cleanup separately. * vm-mime-base64-decode-region: don't use the FSF Emacs base64 decoding function, since it fails completely if it encounters characters outside of the BASE64 alphabet. * vm-mime-attachment-auto-type-alist: added the usual PDF, Quicktime and Excel file extensions. * vm-imap-move-mail: trying using obsolete RFC822.PEEK if BODY.PEEK fails. * vm-imap-retrieve-to-crashbox: support use of obsolete RFC822.PEEK. * vm-so-sortable-datestring: use vm-timezone-make-date-sortable instead of the bare timezone-make-date-sortable, which is less capable of parsing badly formed Date headers. * vm-mime-convert-undisplayable-layout: save the content type parameters from the old type and give them to the new type. * all your base are belong to us -- Manoj Srivastava Sat, 10 Mar 2001 15:53:38 -0600 vm (6.90-1) unstable; urgency=low * Mostly bug fixes. * vm-compose-mail: Use apply instead of funcall to call the yank action. We aren't passing a list of arguments to the function. * vm-mark-or-unmark-messages-same-author: compare author addresses case insensitively. * vm-emit-eom-blurb: ignore case when matching against vm-summary-uninteresting-senders to match what vm-su-interesting-from does. * vm-mime-display-internal-text/html: use 'message' to display any errors encountered. * vm-mime-display-internal-text/enriched: use 'message' to display any errors encountered. * vm-yank-message: call vm-decode-mime-encoded-words in the correct buffer. * default value of vm-auto-center-summary changed from nil to 0. * Removed any relationship with emacs19, since that has been removed from stable. closes: Bug#82788 * since around mid 6.80's, VM has started using grep -c to determine the number of new messages. Before, it just looked at the time stamp and hence did not muck with access times of the spool file. This messes with other biff like programs out there. At present, the only option is to turn vm mail check off; this is already reported as a bug. Stay tuned. -- Manoj Srivastava Sun, 28 Jan 2001 18:13:38 -0600 vm (6.89-1) unstable; urgency=low * Mostly bug fixes. * vm-yank-message: MIME decode the headers of the yanked message if vm-display-using-mime is non-nil. * vm-forward-message: if MIME forwarding, switch the buffer containing the attached message to be multibyte to avoid the appearance of our old friend \201 when the buffer contents are inserted into the composition buffer. (FSF Emacs 20 only). * vm-do-folders-summary: count messages in folders that lack entries in the folders summary database using vm-grep-program. * vm-do-folders-summary: ignore index files in the folder directories. * vm-update-folders-summary-highlight: use intern-soft instead of intern, since the symbol may not be present in the obarray. * vm-mark-for-folders-summary-update: check for killed summary before selecting folders summary buffer. * vm-emit-eom-blurb: bind vm-summary-uninteresting-senders-arrow to "" around call to vm-summary-sprintf. * Makefile: Start using $(prefix) to be more GNUish. Try to create the installation directories if they don't exist. * vm-modify-folder-totals: wrong cells in the list were being updated; fixed. * vm-mime-run-display-function-at-point: return result of calling the display function because callers expect it. This wasn't happening in the FSF Emacs part of the conditional. -- Manoj Srivastava Tue, 26 Dec 2000 17:36:06 -0600 vm (6.88-1) unstable; urgency=low * New upstream revision. The changes are: * New variables: + vm-folders-summary-mode-hook + vm-mmosaic-program + vm-mmosaic-program-switches * vm-determine-proper-charset: don't use MULE rules if operating in a unibyte buffer. The non-MULE rules work better in that case. Dropped use of vm-with-multibyte-buffer. * use BODY.PEEK instead of RFC822.PEEK in IMAP message fetches, since RFC822.PEEK has been made obsolete in RFC 2060. * not decoding for preview if vm-preview-lines == 0 was a mistake, as the header might still need decoding, so this change was reversed. * allow 8-bit chars in IMAP atoms. Microsoft Exchange emits them, resistance is futile. * keep IMAP trace buffer if a protocol error occurs. Code for this was partially done, it's finished now. * improved folders summary, new folders summary format specifier %s. * vm-move-to-xxxx-button: fixed code assumption that buttons were contiguous. * qp-encode.c: get rid of non-constant initializers (nextc = getchar()) to avoid warnings from Sun's compiler. * vm-toolbar-fsfemacs-install-toolbar: "mime" now works in vm-use-toolbar under FSF Emacs. * don't display verbose "Waiting for POP QUIT" message unless getting mail interactively. * make vm-thread-loop-obarray a larger hash table. * use vm-global-block-new-mail to prevent async reentrance into the POP and IMAP code. Use vm-block-new-mail to prevent command-level mail retrieval buffer locally. * vm-check-mail-itimer-function: always check for mail. Now that we're updating the folders summary we need to do the check even if we know there is new mail fmor a previous check, so that the summary so kept up to date. * removed Mule menu from VM's commandeered menubar (FSF Emacs 20 only). * C-c C-p in composition buffer binding changed from vm-mime-preview-composition to vm-preview-composition. * vm-sort-messages: fixed paren problem that broke non-thread sorting while threading was enabled. * vm-assimilate-new-messages: don't run vm-arrived-message-hook and vm-arrived-messages-hook if being called for the first time in this folder. Old check for this didn't work properly, so now first-time status is passed in as a parameter. * vm-emit-eom-blurb: use vm-summary-sprintf on full name so that it is MIME decoded if necessary. * vm-check-for-spooled-mail: don't skip remaining spool files once we know there is mail waiting. We still need to retrieve data for the remaining folders for the folders summary. -- Manoj Srivastava Mon, 18 Dec 2000 13:45:59 -0600 vm (6.87-1) unstable; urgency=low * New upstream revision. The changes are: * New commands: + vm-delete-duplicate-messages * New variables: + vm-pop-read-quit-response (default value is t) * vm-toolbar-fsfemacs-install-toolbar: fix logic reversal that caused Emacs 21 toolbar to never be installed. * reviewed coding-system-for-{read,write} usage everywhere and brought it into line with current theory of how Emacs/MULE works. coding-system-for-write is bound in more places because in the Emacs 21.0.91 pretest, write-region, even when called non-interactively, will query the user if it doesn't think the buffer's coding system can be used to safely write out the data. * vm-mail-to-mailto-url: vm-url-decode -> vm-url-decode-string. * vm-move-to-xxxx-button: next-etent-change -> next-extent-change. * vm-move-to-xxxx-button: dropped point movement outside the loop as it wasn't needed and actually broke things. * vm-add-or-delete-message-labels: don't cycle through the message list if there are no labels to act upon. * vm-add-or-delete-message-labels: return a list of labels that were rejected because they are not known. vm-add-existing-message-labels expects this and it apparently hasn't been done in a long time. * call base64-encode-region and base64-decode-region only if they are subrs. * vm-check-for-spooled-mail: save-excursion around the guts of the let form that binds vm-block-new-mail to avoid the restore-the-wrong-local-variable bug. * vm-get-spooled-mail: save-excursion around the guts of the let form that binds vm-block-new-mail to avoid the restore-the-wrong-local-variable bug. * vm-determine-proper-content-transfer-encoding: changed search for non-ASCII chars from [\200-\377] to [^\000-\177] because FSF Emacs 20 re-search-forward does not match 0200-0377 unibyte chars in multibyte buffers. They only match in unibyte buffers. * vm-unbury-buffer: wrapped call to switch-to-buffer in condition-case in case it fails (dedicated window, minibuffer window) * reversed coding system changes introduced in VM 6.85 in vm-line-ending-coding-system and vm-binary-coding-system, as they were wrong. * vm-minibuffer-complete-word: use minibuffer-prompt-end function to determine where the prompt ends instead of previous-property-change. * vm-toolbar-fsfemacs-install-toolbar: use xbm images if the display is not color-capable. * vm-toolbar-fsfemacs-install-toolbar: don't use "mime-colorful" as a basename when looking for an XBM for a non-color display. * vm-toolbar-make-fsfemacs-toolbar-image-spec: use ":mask heuristic" to make the toolbar pixmap/bitmap backgrounds track the background of the tool-bar face. * vm-mime-base64-encode-region: when using base64-encode-region wrap it in a condition-case to catch errors and resignal all errors with vm-mime-error. * vm-mime-base64-decode-region: when using base64-decode-region wrap it in a condition-case to catch errors and resignal all errors with vm-mime-error. * getmail-xx.xbm was a PBM file. No one noticed. Fixed. * check for vm-fsfemacs-p before using overlay-put, overlay-get, etc. in the extent/overlay compatibility functions. We can't use the overlay emulation package's functions because VM needs the functions to be able to handle plain extents also. * vm-mime-fsfemacs-encode-composition: catch the "Invalid search bound (wrong side of point)" error that font-lock can throw and ignore it. * vm-set-window-configuration: delete windows that are over explicitly named buffers. This is meant as an aid to BBDB users who might want to include a BBDB window in a configuration but don't want the window to appear unless the displayed buffer is non-empty. * install the toolbar only once under FSF Emacs, since it will appear everywhere vm-mode-map is used thereafter. * panic buffoon's color changed from rgb:ff/7f/ff to rgb:e1/92/46 (tan). -- Manoj Srivastava Fri, 1 Dec 2000 02:13:21 -0600 vm (6.85-1) unstable; urgency=low * New upstream revision. The changes are: * New commands: + vm-move-to-previous-button + vm-move-to-next-button * vm-end-of-message, vm-beginning-of-message: wrap vm-save-buffer-excursion about part of function that does window selection since that can change the current buffer. vm-narrow-to-page was noticing the buffer change to the summary; vm-message-pointer was suddenly nil. * made vm-create-virtual-folder, and by effect its callers, honor vm-next-command-uses-marks. * vm-apply-virtual-folder: honor vm-next-command-uses-marks. * added no-suggested-filename arg to vm-mime-attach-file and vm-mime-attach-object. * vm-preview-current-message: don't decode for preview unless vm-preview-lines is non-nil, as this is extra unnecessary work. * vm-pop-end-session: read POP QUIT response; Microsoft Exchange apparently will sometimes not expunge if we close the connection without reading the response. * set reasonable default value for vm-folders-summary-directories. * vm-preview-current-message: don't block display of any type other than message/external-body and externally displayed types when supporting vm-mime-decode-for-preview. * internal image support for v21 Emacs. * toolbar support for v21 Emacs. * Makefile: for 'make autoload' compile vm.el into vm.elc instead of writing require statements directly into it, otherwise Emacs 21 bitches. * vm-binary-coding-system was returning no-conversion under FSF Emacs, which is wrong, now returns raw-text. * vm-minibuffer-complete-word: In Emacs 21, during a minibuffer read the minibuffer contains propt as buffer text and that text is read only. So we can no longer assume that (point-min) is where the user-entered text starts so we must compute this location. Calling previous-property-change is a kludge but it seems ot be the only thing that does the job. * vm-mime-display-internal-message/external-body: for Emacs 21, use a multibyte work buffer, otherwise the evil \201s appear in the tempfile and utterly corrupt it. Also set buffer-file-coding-system in the work buffer, since write-region may be called in it later. * dropped use of vm-with-unibyte-buffer. I don't htink it is needed any longer. * vm-assimilate-new-messages: only run vm-arrived-messages-hook if a new message has arrived. * use a normal keymap instead of a sparse keymap for vm-mode-map. -- Manoj Srivastava Fri, 24 Nov 2000 23:42:45 -0600 vm (6.84-1) unstable; urgency=low * New upstream revision. The changes are: * vm-submit-bug-report: mail-user-agent should be a symbol not a list--- fixed. * vm-keep-some-buffers: kill a buffer even if it is modified if it's value of buffer-offer-save is nil. * vm-pop-make-session: if APOP authentcation fails, remove the saved password just like we do for PASS authentication. * new variable and function vm-xemacs-file-coding-p tells whether XEmacs was compiled with --with-file-coding=yes, which means several things need to be treated the same as if MULE were enabled. * when deciding whether to call set-buffer-file-coding-system just check fboundp instead of xemacs-mule-p or fsfemacs-mule-p. This should help XEmacs-NT+file-coding. * New variables: + vm-page-continuation-glyph + vm-folders-summary-database + vm-folders-summary-directories + vm-folders-summary-format + vm-frame-per-folders-summary * New commands: + vm-folders-summarize * Makefile: moved vm-version.el to the beginning of the SOURCES list so that "make debug" doesn't crash on unbound variables. * vm-narrow-to-page: move to beginning of line only if we're not at end of buffer. If we're at end of buffer, it usually means forward-page failed to find a page delimiter and crashed into point-max. * vm-scroll-forward: after calling vm-narrow-to-page move to either the new window start or the start of the text section of the message, whichever is the greater buffer position. This fixes the semi-broken backward paging over page delimiters and fixed the broken forward scrolling over page delimiters after scrolling backward through the same message. * vm-narrow-to-page: use overlay/extent to display a "...more..." type string at the end of a page. * vm-scroll-forward: do (sit-for 0) to refresh display early so that the end of message notice appears when it should when scrolling over page delimiters. * vm-mime-display-internal-text/html: insert placeholder character before end marker before calling w3-region to avoid end == start marker squashing problem. * vm-submit-bug-report: reporter-submit-bug-report apparently dropped support for the variable reporter-mailer in favor of using mail-user-agent instead. Bind this variable as well the old one so bug reporters can send attachments. * vm: don't decode MIME if recover-file is likely to happen, since recover-file does not work in a presentation buffer. * vm-mail-to-mailto-url: decode URL before handing it to vm-mail-internal. * vm-mime-compile-format-1: removed code to decode and reencode MIME encoded words, since these aren't needed in MIME button format tags. * give up on disabling font-lock around attachments. font-lock users will just have to lose, because I don't see a clean way to do it. Removed futile atemptes from code. * vm-preview-current-message: don't MIME decode for preview if vm-preview-lines == 0 since it's pointless in that case. * vm-select-folder-buffer: make folder buffer selection mandatory, generate error otherwise. New function vm-select-folder-buffer-if-possible is to be used for situations where buffer selection is not mandatory. * moved vm-totals computation out of vm-emit-totals-blurb and into a separate function. * vm-expunge-folder: increment vm-modification-counter in the real folder buffers to invalidate vm-totals. * New variables: + vm-url-retrieval-methods + vm-wget-program + vm-lynx-program * access-type=url support added for message/external-body. * vm-visit-virtual-folder: call vm-fsfemacs-nonmule-display-8bit-chars. This needs to be done for the same reasons as it needs to be done in 'vm'. * provide keymap prompt for # and ## (XEmacs only, unfortunately). * vm-truncate-string: fixed to once again support a negative width argument, even if we're using char-width. * vm-mime-get-xxx-parameter: don't inadvertently truncate parameter value at newline. * vm-string-width: don't use Emacs 20's string width--- it ignores buffer-display-table and thereby hoses the summary. Using char-width on each character and summing the reuslt gives the answer we want. * vm-decode-coding-region: compute old region size based on the source buffer rather than the work buffer, since they might have different unibyte/multibyte status. * vm-decode-coding-region: reverse order of insert/delete sequence at the end to delete then insert. It fixes the parsing of this header From: "Cajsa Ottesj=?ISO-8859-1?B?9g==?=" Apparently if ö is inserted before \366 in a multibyte buffer, Emacs believes that the two characters are one character and moves point forward past the \366. This loses because the \366 needs to be deleted. * vm-flush-cached-data: stuff last-modified, pop-retrieved and imap-retrieved lists. * vm-pop-move-mail: if we retrieved something, call vm-stuff-pop-retrieved. * vm-imap-move-mail: if we retrieved something, call vm-stuff-imap-retrieved. * vm-mime-display-internal-text/html: pass charset name to vm-mime-charset-decode-region instead a layout. * vm-mime-display-internal-text/enriched: pass charset name to vm-mime-charset-decode-region instead a layout. * vm-menu-mime-dispose-menu: convert extent or overlay into a layout before using layout functions on it. * vm-mime-send-body-to-folder: put leading and trailiing message separators around the message in the temp folder. * vm-mime-send-body-to-folder: clear buffer-modified flag before entering vm-mode. * call the mime-reader-map save functions from the dispose menu instead of the low-level functions, so that vm-mime-delete-after-saving is honored. * vm-mime-can-display-internal: add 'deep' flag, which indicates whether to check the subobject of a message/external-body object. * vm-mime-display-internal-multipart/alternative: use the new 'deep' flag of vm-mime-can-display-internal. -- Manoj Srivastava Fri, 17 Nov 2000 12:20:14 -0600 vm (6.81-1) unstable; urgency=low * New upstream revision, with tonnes of changes for emacs 20 -- Manoj Srivastava Wed, 8 Nov 2000 10:58:09 -0600 vm (6.76-3) unstable; urgency=low * fixed silly typo in dependency; we need miome-codecs, not vm-encoders. closes: Bug#74198 -- Manoj Srivastava Sat, 4 Nov 2000 14:46:02 -0600 vm (6.76-2) unstable; urgency=low * Change the rules file not to require emacs in the binary arch phase. closes: Bug#71354 -- Manoj Srivastava Fri, 15 Sep 2000 13:07:10 -0500 vm (6.76-1) unstable; urgency=low * At last, emacs20 compatibility. This is a new upstream version. excerpted changes: closes: Bug#69189 # New variables: + vm-movemail-program-switches # generate a random Message-ID for previewed compositions in case the user wants to resend the preview somewhere. # vm-fix-my-summary!!!: call vm-set-modflag-of on each message whose summary we whack so that the summary cache is rewritten when the folder is saved. # vm-sort-messages: if this is not a thread sort and threading is enabled, then disable threading and make sure the whole summary is regenerated (to recalculate %I everywhere). # vm-mime-display-internal-image-xxxx: set glyph baseline to 100% to add scrolling in XEmacs 21.2. # vm-generate-index-file-validity-check: set step value to 1 if buffer size is smaller than 11 bytes. Step used to be 0 in this case which led to infloop. # added base64-encode.c, base64-decode.c, qp-encode.c, qp-decode.c to the distribution. # fixed problem in qp-decode.c where lines contain a single character followed by newline would have the first character dropped. # vm-display: allow a string as a buffer argument, convert it to a buffer internally. # vm-print-message: don't set the current buffer to be the shell output buffer, as this makes vm-set-window-configuration bail out early because it wants to be in a VM related buffer. # vm-pipe-message-to-command: don't set the current buffer to be the shell output buffer, as this makes vm-set-window-configuration bail out early because it wants to be in a VM related buffer. # vm-print-message: don't use vm-display to display the shell output buffer, use display-buffer instead and only use it if the output buffer is not empty. # vm-pipe-message-to-command: don't use vm-display to display the shell output buffer, use display-buffer instead and only use it if the output buffer is not empty. # vm-print-message: use the vm-print-message config instead of the vm-pipe-message-to-command config. # vm-display: don't immediately set current buffer to be the buffer to be displayed. This behavior made vm-set-window-configuration bail out early. # vm-discard-cached-data: call vm-garbage-collect-message before flushing message caches. # look for (fboundp 'w3-about) in addition to (fboundp 'w3-region) to determine if text/html can be displayed internally. # make after-save-hook local in VM folder buffers. # vm-get-new-mail: make third arg to read-file-name nil, make fourth arg t. # vm-compose-mail: move to point-min before searching for the header separator string. # Removed bad quote in vm-delete-mime-object menu entry. # vm-match-data: replaced with version that calls match-data to figure out the number of valid \(..\) groups. Emacs 20.4 is randomly signaling args-out-of-range if the arg to match-beginning exceed the number of internally allocated registers in the regexp engine or some such nonsense. # vm-frame-loop: in the last deletion check, also check the delete-me frame with vm-created-this-frame-p before deleting it. # vm-check-index-file-validity: allow for a nil modified time, which can occur if the folder is empty. # generalized vm-keep-mail-buffer into vm-keep-some-buffers and made the former call the latter. # keep POP and IMAP trace buffers if there is trouble making a connection. # complain to user if APOP authentication is asked for but isn't supported. Previously POP retrieval silently failed. # vm-reorder-message-headers: For babyl folders, add a newline before the EOOH line if header section does not end with two newline. # macroized most uses of coding system constants 'no-conversion and 'binary, because 'no-conversion doesn't meant the same thing in Emacs and XEmacs. # vm: if buffer-file-coding-system is nil, set it to 'raw-text. (FSF Emacs MULE only). # removed duplicate (make-variable-buffer-local 'vm-pop-retrieved-messages) # vm-parse-date: assume 2-digit year specifications < 70 are in the 2000's rather than the 1900's. # vm-mm-encoded-header: bind case-fold-search to t during search for encoded words. * Added new package for the included mime transport encoder/decoders. -- Manoj Srivastava Wed, 6 Sep 2000 12:08:15 -0500 vm (6.75-9) unstable; urgency=low * Added documentation and conflicts to reflact the fact that vm and semi/wemi do not happily co-exist. closes: Bug#62048 -- Manoj Srivastava Sat, 15 Apr 2000 01:47:57 -0500 vm (6.75-8) frozen unstable; urgency=low * Use absolute links when related links would not work, for the /usr/doc/latex2tml symlink. * Added a dependency on fileutiles >=4.0, since the package would fail to install with older fileutils. -- Manoj Srivastava Mon, 27 Mar 2000 12:29:26 -0600 vm (6.75-7) frozen unstable; urgency=high * A recent change to the postinst whacked the compilation phase. This fixes what would be an important bug. closes: bug#59725 -- Manoj Srivastava Mon, 6 Mar 2000 16:03:02 -0600 vm (6.75-6) frozen unstable; urgency=low * Fixed an upgrade bug when /usr/doc happens to be a symlink, and does not point to /usr/share/doc. A couple of people were bitten by this. -- Manoj Srivastava Mon, 28 Feb 2000 22:27:05 -0600 vm (6.75-5) frozen unstable; urgency=low * The postinst was vulnerable to being affected by symlinks (if, for some reason, the prerm failed). This has happended for latex2html; and created a grave bug. * There was a bug in the postinst in a case statement, that caused installation to fail for certain situations. * Also fixed an lintian warning -- Manoj Srivastava Tue, 8 Feb 2000 20:16:49 -0600 vm (6.75-4) experimental; urgency=low * his is the experimental version of VM with support for emacs20. Please note that the author says that this may cause lossage due to infelicitous behaviour en emacs20. The Debian developer uses this version, but may merely have been lucky. Use this at your own risk. -- Manoj Srivastava Wed, 1 Sep 1999 01:33:42 -0500 vm (6.75-3) unstable; urgency=low * Darnit. Forgot to change the changelog for the last upload. This one is again meant for unstable. -- Manoj Srivastava Wed, 1 Sep 1999 01:21:00 -0500 vm (6.75-2) unstable; urgency=low * This is the experimental version of VM with support for emacs20. Please note that the author says that this may cause lossage due to infelicitous behaviour en emacs20. The Debian developer uses this version, but may merely have been lucky. Use this at your own risk. -- Manoj Srivastava Mon, 30 Aug 1999 22:30:28 -0500 vm (6.75-1) unstable; urgency=low * New upstream version. Still no support for emacs20. Excerpted changes: * New variables: + vm-mail-send-hook * vm-mime-parse-entity: when checking for a content type of just "text" allow for the possibility that there was no content-type header at all. * use XEmacs built-in MD5 support. * vm-pop-md5: use shell-file-name instead of "/bin/sh". * formatting and typo fixes in the manual and docstrings from will@fumblers.org. -- Manoj Srivastava Mon, 30 Aug 1999 22:04:38 -0500 vm (6.74-2) experimental; urgency=low * This is the experimental version of VM with support for emacs20. Please note that the author says that this may cause lossage due to infelicitous behaviour en emacs20. The Debian developer uses this version, but may merely have been lucky. Use this at your own risk. -- Manoj Srivastava Tue, 3 Aug 1999 12:17:40 -0500 vm (6.74-1) unstable; urgency=low * Starting with this version, vm shall not try and byte compile for emacs20 emacsen. VM has only depended upon emacs19, but it would compile on emacs20 as well. However, emacs 20.4 was released recently, but Kyle still does not feel comfortable with it. Therefore, until the upstream supports emacs20, vm shall not compile under it. Instead, there shall be an experimental version of vm that shall depend on emacs20 as well and support it, but the user uses that at their own risk. I personally have been using vm on emacs20 with no mishap, but that is just one data point. * Excerpted changes: * New variables: + vm-mime-external-content-type-exceptions * vm-mime-parse-entity: quietly treat "text" as a content type as if it were "text/plain" and US-ASCII. * vm-mime-discard-layout-contents: set m to be the layout's message, not the end of the layout's body. * New variables: + vm-mime-decode-for-preview + vm-mime-delete-viewer-processes * vm-mime-display-external-generic: put MIME temp files on the message garbage list instead of the folder's garbage list. * vm-delete-mime-object: copied check for the top-level MIME object from FSF Emacs code to XEmacs code since the former is the correct check to use. * vm-mime-discard-layout-contents: discard cached byte and line counts of the edited message. * vm-sort-compare-thread: in the case where root message IDs are different, if the message dates are identical, use string-lessp on the message IDs to break the tie. This avoids having different messages compare as equal, which makes the sort unstable. * vm-mime-discard-layout-contents: recompute Content-Length header if needed. * vm-mime-can-display-internal: consider all text types except text/html displayable if the character set is displayable. For text/html continue to require W3. -- Manoj Srivastava Tue, 3 Aug 1999 12:01:43 -0500 vm (6.72-1) unstable; urgency=low * Excerpted changes: * New commands: + vm-delete-mime-object * New variables + vm-mime-delete-after-saving + vm-mime-confirm-delete + vm-mime-default-face-charset-exceptions + vm-paragraph-fill-column + vm-imap-session-preauth-hook * removed old, bogus definition of vm-session-initialization from vm.folder.el * added w32 as another name for win32 as a window system type. (FSF Emacs only). * changed default value of vm-mime-default-face-charsets to include iso-8859-1 if running on a tty under FSF Emacs/Mule. * vm-mime-parse-entity: move binding of case-fold-search to a point after the set-buffer call to avoid having the binding overriden by a buffer-local value. * vm-mime-convert-undisplayable-layout: wrap call to vm-mm-layout message in a call to vm-mime-make-message-symbol; a symbol needs to be in the struct slot, not the raw message. * signal an error if mail-alias-file is set and the user is not the superuser. * broke the message ID creation code out of vm-mail-mode-insert-message-id-maybe. * vm-su-do-date: allow a RFC 822 regexp to match a timezone spec that lacks the leading plus or minus. * bind jka-compr-compression-info-list to nil in various place to avoid unwanted compression or decompression of data. * vm-mime-send-body-to-file: bind jka-compr-compression-info-list to nil instead of func-binding jka-compr-get-compression-info. * vm-sort-messages: call vm-build-thread-lists (new function) which calls vm-th-thread-list on each message in the folder. This generates keys that the thread sort needs before the sort happens instead of during it. Fixes thread sorting bugs. -- Manoj Srivastava Thu, 15 Jul 1999 15:57:47 -0500 vm (6.71-2) unstable; urgency=low * VM not creates multiple vm.info-? files. Remember to install all of them. closes: Bug#38041 -- Manoj Srivastava Thu, 20 May 1999 11:15:38 -0500 vm (6.71-1) unstable; urgency=low * Excerpted changes: * vm-mime-display-internal-text/plain: get message struct from the MIME layout instead of from vm-message-pointer, since the latter is utterly the wrong place to find it in this context. Also, don't fill if no-highlighting is non-nil. * vm-add-or-delete-message-labels: propagate label additions in virtual folders to the global lists of the underlying real folders. * bind format-alist to nil around calls to insert-file-contents in MIME composition encoding functions. * New variables: + vm-fill-paragraphs-containing-long-lines * vm-mime-display-internal-text/html: moved the code that rmeoves read-only text properties into the vm-with-unibyte-buffer form. * vm-make-presentation-copy: bind inhibit-read-only before tryign to modify an existing presentation buffer. This is to avoid stumbling over read-only text properties. * vm-mime-insert-button: use 'append' instead of 'nconc' to add a keymap parent. (FSF Emacs only) This avoids modifying the child keymap and creating a circular keymap structure in a subsequent call. * moved code that sets vm-xemacs-p, vm-fsfemacs-p, etc. to vm-version.el. Moved other basic feature checking code to vm-version.el. * Makefile: make sure vm-version gets loaded first, so the version/feature checking code is run very early. Some of it is needed by other modules at load time. * added keymap for MIME buttons so you can display, save, pipe, print from a tty. * vm-mime-xemacs-encode-composition: use insert-file-contents instead of insert-file-contents-literally and see what breaks. This will allow EFS to work. * default value of vm-mime-default-face-charsets no longer contains "iso-8859-1" under FSF Emacs/Mule. 8-bit character display as octal codes in a unibyte buffer unless standard-display-europeans or equivalent is called, and we don't call this function under MULE. * vm-compose-mail: this function is a VM entry point so call vm-session-initialization. -- Manoj Srivastava Thu, 13 May 1999 14:47:30 -0500 vm (6.68-1) unstable; urgency=low * Added doc-base support. * New upstream version. Please NOTE: Kyle has retracted support for emacs 20.3, saying that there is an bug in that version of emacs whence a buffer string copy does not copy the contents of the buffer, causing mail to be distorted. I have personally committed to using emacs20 v 20.3, and I have never experienced this bug. However, the chance does exist (and has existed for all emacs20+vm combinations); use this on emacs20 at your own risk. (I have changed VM so it does at least compile on Emacs 20.3). * Excerpted changes: * put user specified Netscape switches before the -remote stuff in the arg list to Netscape. * vm-imap-retrieve-to-crashbox: use char-after instead of char-before since Emacs 19.34 doesn't have char-before. * use vm-coding-system-name instead of coding-system-name. fset vm-coding-system-name to coding-system-name if it exists, otherwise use symbol-name. FSF Emacs doesn't have a coding system object, so the name is the same as the coding system symbol's name. * vm-determine-proper-charset: wrap the guts of the function in a vm-with-multibyte-buffer form to ensure we're looking at characters instead of the raw encoding data when scanning for the character sets that are present. * vm-decode-mime-layout: support the old 'name' parameter when supporting vm-infer-mime-types. * vm-do-reply: don't match vm-subject-ignored-prefix against the subject to determine if we prepend vm-reply-subject-prefix to the subject or not. This reverts a change made in VM 6.47. * vm-mm-layout: call vm-mime-parse-entity-safe instead of vm-mime-parse-entity so that we get always get a layout back. This avoids a MIME part completely disappearing if we can't parse it. * vm-mime-parse-entity-safe: use type "error/error" for the layout returned if the MIME part can't be parsed. * vm-mime-qp-encode-region: hex encode _ and ? for Q encoding as required by RFC 2047. * vm-mime-send-body-to-file: Func-bind jka-compr-get-compression-info to 'ignore' to avoid double compression of saved MIME bodies that are already compressed. * vm-imap-make-session: quote (using IMAP quoting rules) login name and password that are sent as part of the LOGIN command. * vm-mime-parse-entity-safe: pass message and passing-message-only flag to vm-mime-parse-entity. * vm-mime-parse-entity: wrong number of fields in the last layout structure fixed. * make MIME transfer encoding/decoding work buffers unibyte to avoid corruption when characters are copied from them. (FSF Emacs only). * vm-mime-attach-message: store the message to attach in an unibyte buffer instead of a multibyte buffer. * vm-mime-fsfemacs-encode-composition: encode text regions using coding system selected from vm-mime-mule-coding-to-charset-alist instead of relying on buffer-file-coding-system to be set properly. * vm-mime-fsfemacs-encode-composition: when handling the attachment of a composite object, add MIME header section (if not already provided) before parsing and transfer encoding the object. vm-mime-xemacs-encode-composition similarly modified. * New variables: + vm-mime-qp-decoder-program + vm-mime-qp-decoder-switches + vm-mime-qp-encoder-program + vm-mime-qp-encoder-switches * set-file-coding-system -> set-buffer-file-coding-system. * vm-edit-message: force edit buffer to be unibyte (FSF Emacs only). * vm: force folder buffer to be unibyte (FSF Emacs only). * wrap parts of various MIME decoding and display functions in vm-with-unibyte-buffer so we can work with unwashed 8-bit data directly. (FSF Emacs only). * force some buffers we create to be unibyte buffers to avoid conflabulation of 8-bit data. (FSF Emacs only). * vm-find-trailing-message-separator: point still not moving backward all the times that it should be, so go back to ignoring the return value of vm-find-leading-message-separator and always moving backward. * vm-mail-mode-insert-message-id-maybe: use the hostname variable we so carefullly initialized, instead of just using (system-name). * vm-mime-base64-encode-region: if B encoding, strip newlines from the work buffer instead of the buffer region we're converting. * vm-mime-base64-encode-region: don't emit status message unless the region we're encoding is larger than 200 chars. * vm-mime-parse-entity: new fourth argument that tells the function whether to use the message argument for positional information or to just use it to struct in the message slot of the MIME layout struct. Same for vm-mime-parse-entity-safe. Use this new argument appropriately in various places so the message slot gets filled in more places. -- Manoj Srivastava Sat, 27 Feb 1999 23:38:16 -0600 vm (6.65-2) unstable; urgency=low * vm-search.el had gone missing, for some reason. fixes: BUG#32658 -- Manoj Srivastava Sun, 31 Jan 1999 16:21:57 -0600 vm (6.65-1) unstable; urgency=low * New upstream version. This is trhe forst version ratified for emacs20. -- Manoj Srivastava Fri, 29 Jan 1999 11:35:18 -0600 vm (6.64-1) unstable; urgency=low * New upstream version. Excerpted changes: * vm-mail-mode-insert-message-id-maybe: (stringp 'mail-host-address) -> (stringp mail-host-address). * vm-imap-retrieve-to-crashbox: for From_-with-Content-Length and BellFrom_ folder, add a newline to the end of a message if the message lacks one. * vm-mime-display-internal-text/html: third arg to remove-text-properties changed to be a plist as the function requires. * new edition of the user manual. * updated README, new installation instructions for manual, mention Web site * vm-search18.el gone, vm-search19.el became vm-search.el. * vm-pop-make-session: switched to the trace buffer earlier in the function so that MULE coding system is set in correct buffer. Add connection status messages to trace buffer. * vm-imap-make-session: switched to the trace buffer earlier in the function so that MULE coding system is set in correct buffer. Added connection status messages to trace buffer. * vm-submit-bug-report: use 'vm-mail instead of 'mail for sending bug reports. Less confusing, and will work most of the time. -- Manoj Srivastava Tue, 26 Jan 1999 18:33:33 -0600 vm (6.63-2) unstable; urgency=low * Uncomment call to update menu on postrm. -- Manoj Srivastava Sat, 9 Jan 1999 12:25:05 -0600 vm (6.63-1) unstable; urgency=low * New upstream version. Excerpted changes: * set selective-display to nil in various places in the code where write-region and call-process-region (which calls write-region) are called to avoid the CR -> LF translation. * vm-load-window-configurations: added bind of coding-system-for-read. * vm-store-window-configurations: removed binding of coding-system-for-read, moved coding-system-for-write binding to be ambient only during the write-region call. * removed all but one of the bindings of inhibit-read-only in the MIME code. * vm-mime-display-internal-text/html: Added a remove-text-properties call to remove read-only text properties. * vm-mime-attach-object: Don't allow attachment of object to a composition buffer that has already been encoded. * retain IMAP session trace buffer if a protocol error occurs. * removed vm-iamp-store-failed error definition since it was unused. * 'w' summary format specifier now gives full weekday name. * vm-mail-mode-insert-message-id-maybe: ensure RFC 822 compliant month and day name by indexing the names from an alist instead of relying on format-time-string. format-time-string's output can't be trusted for this because of the dubious `locale' stuff in the C library. * for non-Content-Length based From_ types, don't require a year >= A.D. 1000 at the end of the From line--- instead only require a single digit. This change to deal with some evil mailer that puts a numeric timezone at the end of the line. * vm-make-presentation-buffer: remove buffer local foreground and background colors set in the default face in the presentation buffer. * dropped the Videodrome joke from vm-submit-bug-report. * vm-mime-fsfemacs-encode-composition: bind file-name-buffer-file-type-alist so that a bit-for-bit binary file read is assured. This matters only to NTEmacs. * vm-mouse-send-url-to-netscape: Netscape 4.05 apparently doesn't like the space after the comma in openURL(..., new-window) and doesn't create a new window. So the space has been removed. * read per-folder IMAP retrieved list at startup... forgot to add code to do this. * accept lower-case hex digits in quoted-printable encoding. * vm-mime-composite-type-p: assume message/rfc822 and message/news are the only composite "message" types. New ones will have to be manually added. * vm-misc.el: moved macros to vm-macro.el. * Makefile: Preload vm-macro.el instead of vm-misc.el. -- Manoj Srivastava Sat, 9 Jan 1999 06:19:51 -0600 vm (6.62-4) frozen unstable; urgency=low * Fixed a problem with the remove/purge process in which the byte compiled files would be left behind. Since VM is in a bug fix mode, no new code has been introduced; and this bug fix should be justification to include in frozen. -- Manoj Srivastava Wed, 25 Nov 1998 11:32:03 -0600 vm (6.62-3) unstable; urgency=low * Try and make the installation quieter. -- Manoj Srivastava Tue, 3 Nov 1998 23:43:01 -0600 vm (6.62-2) unstable; urgency=low * Enhanced mail-mode-smart-tab to use bbdb-complete-name in the headers if and only if bbdb is already loaded into emacs. In the body, tab still is tab-to-tab-stop. This enhancement comes at the request of Dirk Eddelbuettel . -- Manoj Srivastava Thu, 17 Sep 1998 22:45:22 -0500 vm (6.62-1) unstable; urgency=low * New upstream version. Excerpted changes: * vm-mouse-send-url-to-netscape: Change commas to %2C to avoid confusing Netscape -remote. * vm-mime-display-external-generic: when searching for %f, ignore %%f. * vm-decode-mime-layoout: drop rule that causes unmatched text/* and message/* MIME objects to be displayed as text plain. * vm-mime-can-display-internal: don't load W3 just to see if w3-region gets bound. If the user wants to view inline HTML, they'll have to either load W3 explicitly or set up an autoload for w3-region. -- Manoj Srivastava Thu, 10 Sep 1998 09:42:40 -0500 vm (6.61-1) unstable; urgency=low * New upstream version. Excerpted changes: * vm-find-trailing-message-separator: point wasn't being moved backward when it should be. Change check to use the return value of vm-find-leading-message-separator. * vm-build-message-list: add the starting position of the garbage to the garbage warning. * don't use gray75 to initialize gui-button-face under Windows (FSF Emacs only). Use only primary colors instead. * vm-find-trailing-message-separator: for From_ folders, don't move point backward one char after finding the leading separator unless that char is a newline. * vm-skip-past-trailing-message-separator: for From_ folders don't move point forward one character unless we're not at end of buffer. * vm-submit-bug-report: require vm-vars and vm-version modules. * vm-visit-folder-other-frame: call vm-session-initialization even if the command is not called interactively. -- Manoj Srivastava Sun, 30 Aug 1998 13:14:22 -0500 vm (6.59-1) unstable; urgency=low * New upstream version. Excerpted changes: * New variables: + vm-default-From_-folder-type * new folder type: BellFrom_. * vm-mime-display-internal-multipart/alternative: call vm-mime-should-display-internal with two arguments, as required, instead of one. * vm-munge-message-separators: if folder type arg is From_, use BellFrom_ as type to produce folders that are less likely to be misparsed by other mailers. * quoted vm variables in docstrings in vm-vars.el with ` and ' for hyper-apropos. Change previous other uses of `foo' to ``foo''. * fixed typo in vm-mime-fsfemacs-encode-composition; e -> o. * added a defvar for timer-list in vm-folder.el. * added defvars for standard-display-table, buffer-display-table and buffer-file-type in vm-mime.el. * added a defvar for mail-personal-alias-file in vm-reply.el. * added defvars for lpr-command and lpr-switches. * rewrote text/html inline display functoin to not need a temp buffer, save-excursion, and save-restriction. Needed because w3-region puts markers into the buffer that can't be copied out. * don't auto-create text body attachments that contain all whitespace if the attachment will be at the beginning or end of the composition. * vm-imap-retrieve-to-crashbox: munge folder message separators so the retrieved messages will be parsed correctly in the target folder. * vm-do-reply: don't use contents of In-Reply-To in generated References header unless no References header is present. * if vm-mime-alternative-select-method is best-internal, consider a MIME object only if the user wants it displayed internally, not just if it can be displayed internally. -- Manoj Srivastava Sat, 25 Jul 1998 15:42:27 -0500 vm (6.56-1) unstable; urgency=low * New upstream version. Excerpted changes: * vm-get-spooled-mail: set the non-file maildrop flag on each pass though the loop. * vm-get-spool-mail: restore expand-file-name call on the maildrop so that tildes get expanded. * store/use the same password for IMAP mailboxes on the same host. * removed greeting block on Cyrus server. * Shapiro typo fixes. * vm-mail-mode-insert-message-id-maybe: check mail-host-address with stringp instead of boundp before using its value. * vm-rfc1153-or-rfc934-burst-message: do digest separator unstuffing on a per message basis and before message separator munging, so that message separators exposed by the unstuffing get munged. * registered vm-imap-protocol-error as a known error/exception. Use it. * vm-check-for-spooled-mail: check spool filename against the IMAP template before chaecking against the POP template, since the POP template will match both. * vm-imap-check-mail: bail early if message count in mailbox is zero. * first crack at IMAP support. * New commands: + vm-expunge-imap-messages * New varisbles: + vm-recognize-imap-maildrops + vm-imap-auto-expunge-alist + vm-imap-bytes-per-session + vm-imap-expunge-after-retrieving + vm-imap-max-message-size + vm-imap-messages-per-session * use vm-check-for-killed-folder before calling vm-select-folder-buffer in a few functions that don't necessarily need to select the folder buffer in order to run. * vm-goto-message bound to M-g. * vm-find-leading-message-separator: for From_ type folders require that end of the leading separator line match " [1-9][0-9][0-9][0-9]". Revisit in eight thousand years. * rename vm-sprintf to vm-summary-sprintf. Use alists to store compiled formats instead of using symbol property lists. * vm-mime-xemacs-encode-composition: discard all but Content-ID header in already MIME'd objects to avoid header duplication. Same for vm-mime-fsfemacs-encode-composition. * vm-mime-display-internal-text/html: If error signaled, catch it, store the error message and return nil. * more descriptive buffer name for header buffer used when asking about POP retrievals. * vm-mail-mode-insert-message-id-maybe: try harder to find a hostname that has dots in it for the Message-ID header. * made vm-pop-retrieved-messages a buffer-local variable, as the table isn't meant to be shared among folders. * vm-expunge-pop-messages: use password-less maildrop specs when doing comparisons in skip code. Changed catch tag from 'skip to 'replay to more accurately reflect what's happening. * vm-pop-end-session: delete the trace buffer. * vm-pop-make-session: generate a new buffer for each session instead of reusing the same one. * vm-expunge-pop-messages: set buffer-read-only to nil in trouble-alert buffer before trying to modify erase it. -- Manoj Srivastava Wed, 15 Jul 1998 09:16:04 -0500 vm (6.53-1) unstable; urgency=low * New upstream version. Excerpted changes: * vm-mf-default-action: needed car of vm-mm-layout-type to extract type string. * vm-mime-display-button-xxxx: don't display button unless there's a defined method for displaying the object. * New variables: + vm-auto-displayed-mime-content-type-exceptions + vm-mime-internal-content-type-exceptions * vm-find-leading-message-separator: for From_ type folders, reinstate requirement that there be two newlines before "From " message separators. * renamed vm-mime-should-display-external to vm-mime-can-display-internal. * added big5 to vm-mime-mule-charset-to-coding-alist * default value of vm-send-using-mime to always be t instead of looking to see if the TM mime-setup feature is present. * added a newline to the 'end' line of a uuencoded attachmentsif there isn't one already; this to cope with the usual crocked PC mail readers (may they reek). * vm-mime-text-description: further identify a text part if it has a standard signature in it. * remove TM hooks from mail mode buffers if vm-send-using-mime is non-nil. * vm-mime-send-body-to-file: if user enters a directory name, use it unconditionally. * panic buffoon's color changed from rgb:00/df/ff to rgb:ff/7f/ff. * use user-mail-address function in Bcc header (XEmacs only). * use user-mail-address variable, if bound in, Bcc headers. * replaced definition of vm-load-init-file in vm-startup.el with the one from vm-folder.el. * use vm-mime-default-action-string-alist only if VM knows how to display the MIME object. Fiddle with the strings in the list. * support foregroundToolBarColor symbol in the 'small' set of toolbar pixmaps (XEmacs only). -- Manoj Srivastava Mon, 29 Jun 1998 18:10:12 -0500 vm (6.51-1) unstable; urgency=low * New upstream version. Excerpted changes: * don't call make-face if no face support is compiled into Emacs (FSF Emacs only). * enable inline display of text/html again. * vm-mime-text-type-p: anchor string matches and add a trailing / to assure matching only the correct types. * more fiddling with newlines around the Content-Description header, hopefully getting it right this time. * correct "Display as Text" MIME menu item. * vm-mime-charset-internally-displayable-p: check vm-mime-mule-charset-to-coding-alist if vm-fsfemacs-mule-p is non-nil. * vm-rename-current-mail-buffer: changed to recognize new default composition buffer name introduced in 6.49. * vm-mime-display-external-generic: append filename when supporting COMMAND-LINE form. Copy program-list since we may need to modify it. * vm-discard-cached-data: set mime layout and mime encoded header slots to nil in virtual messages. * vm-session-initialization: initialize gui-button-face if not already initialized (FSF Emacs only). * vm-pop-move-mail: check vm-pop-auto-expunge-alist properly; defaulting did not work as you would expect. * enable image and multiple font support for Windows (XEmacs only). * provide Content-Description headers for text surrounding MIME attachments in compositions. * vm-forward-message: provide Content-Description header for a MIME forwarded message. * use same filename extension as that of the suggested attachment filename when creating a tempfile for use by an external MIME viewer. * New variables: + vm-infer-mime-types * vm-pop-check-mail: return nil if UIDL returns an empty list. * vm-mail-internal: default composition buffer name to "mail to ?" instead of "*VM-mail*". * added '$' to regexps in default value of vm-mime-attachment-auto-type-alist. * new semantics for vm-mime-external-content-types-alist: %-spec expansion, shell command line syntax allowed. * default value of vm-auto-decode-mime-messages changed from nil to t. -- Manoj Srivastava Thu, 25 Jun 1998 11:45:44 -0500 vm (6.48-1) unstable; urgency=low * New upstream version. Excerpted changes: * New variables: + vm-spooled-mail-waiting-hook + vm-mime-uuencode-decoder-program + vm-mime-uuencode-decoder-switches * vm-delete-index-file: don't try to delete the file if vm-index-file-suffix is not a string. * show completions if completion-auto-help is non-nil. Needed to replace car with caar in one place in vm-minibuffer-complete-word. * vm-startup-with-summary: handle 0 case specially so that a negative number is not passed to nth. * make vm-mime-preview-composition an alias for vm-preview-composition, fixing the typo that aliased vm-preview-mime-composition instead. * vm-auto-archive-messages: don't archive messages to the same folder that the user is visiting. * vm-mime-fsfemacs-encode-composition: encode last MIME part from point to point-max instead of point-min to point-max. (FSF Emacs/MULE only.) * fixed regexp syntax for backslashes in [..] contexts. Need four backslahses for every one to appear in the regexp. * vm-discard-cached-data: set the mime-encoded-header-flag to nil. * vm-mime-burst-message: reverse varref and funcall in `or' expression to avoid skipping the rest of the vm-mime-burst-layout calls after the first successful one. * vm-check-pop-mail: use UIDL data to determine if messages in the popdrop have been retrieved. * vm-get-spooled-mail: always set vm-spooled-mail-waiting to nil after doing a sweep through the spool files, whether mailw as retrieved or not. Not really correct but it is what the user expects. -- Manoj Srivastava Mon, 1 Jun 1998 13:39:24 -0500 vm (6.47-2) frozen unstable; urgency=low * Fix a typo in the rules that was preventing th eexamples dir from getting exported. closes: Bug#22407 -- Manoj Srivastava Wed, 13 May 1998 12:49:18 -0500 vm (6.47-1) frozen unstable; urgency=low * New upstream BUG FIX version * Excerpted changes are: * vm-write-string: bind buffer-read-only to nil before attempting to modify the buffer. * vm-auto-select-folder: Do the eval if the cdr of the alist pair is anything other than a string, instead of it it is anything other than an atom. * vm-do-reply: match vm-subject-ignored-prefix against the subject and don't prepend vm-reply-subject-prefix if there is a prefix match. * vm-buffer-to-label: map presentation buffers to the 'message label. * vm-scroll-forward: raise and select frame before setting window configuration. * vm-frame-totally-visible-p: Consider frame totally visible if return value of frame-visible-p is not eequal to nil or 'hidden. * dropped `sender' synonym virtual selectors. * If prefix arg is given to vm-visit-virtual-folder-* commands, say "read only" in the prompt string. -- Manoj Srivastava Mon, 4 May 1998 10:04:15 -0500 vm (6.46-4) frozen unstable; urgency=low * Added a recommendation for make; and scream loudly if make is not found. -- Manoj Srivastava Mon, 20 Apr 1998 03:36:12 -0500 vm (6.46-3) unstable; urgency=low * Fixed broken path in vm-init.el -- Manoj Srivastava Thu, 16 Apr 1998 01:03:35 -0500 vm (6.46-2) frozen unstable; urgency=low * Bug fixes in packaging the new emacsen way. -- Manoj Srivastava Tue, 14 Apr 1998 00:22:25 -0500 vm (6.46-1) frozen unstable; urgency=low * Now an emacs19 dependent package in the new style * upstream bug fix release * Call emacsen install in postinst, and emacsen remove in postrm * Fixed bad magic numbe in file. closes: Bug#20947 * Fixed example files. closes: Bug#20946 * Verified that vm does not unzip files on its own. closes: Bug#20948 -- Manoj Srivastava Mon, 13 Apr 1998 01:59:43 -0500 vm (6.42-1) unstable; urgency=low * New upstream version * New variables: + vm-pop-expunge-after-retrieving + vm-pop-auto-expunge-alist + vm-mime-button-format-alist * vm-save-message: don't set vm-last-save-folder if it is non-nil and the user selected folder matches what vm-auto-folder-alist would have chosen. Tried to do this in 6.41, but broke the setting of vm-last-save-folder instead. * vm-expunge-pop-messages: typo prngn -> progn. * vm-expunge-pop-messages: check whether vm-make-pop-session returns nil. * vm-read-attributes: allow header without a label list. The label part of the data in the header was added later and may not be in the header of some older folders. * dropped use of vm-with-virtual-selector-variables in favor of using an alist. * only use char-to-int if defined, use identity funciton otherwise. -- Manoj Srivastava Mon, 16 Feb 1998 17:47:07 -0600 vm (6.41-1) unstable; urgency=low * Modified the copyright statement to include addresses. * Fixed silly typo in version string * New upstream version * New variables: + vm-index-file-suffix * New commands: + vm-expunge-pop-messages * don't issue DELE commands on POP messages when retrieving. Remember what messages have been retrieved and avoid retrieving them later. * vm-save-message: don't set vm-last-save-folder if it is non-nil and the user selected folder matches what vm-auto-folder-alist would have chosen. * vm-show-list: sort list before displaying it. * vm-show-list: display list ordered top to bottom then left to right, instead of left to right and then top to bottom. * bind print-length to nil in some places to avoid truncation of Lisp Objects in folder headers. * Added notes all over warning about tm-vm breaking vm, since tm-vm was written for vm-5.X. It is still possible to use tm for mail composition. closes: Bug#16862 -- Manoj Srivastava Fri, 13 Feb 1998 12:55:31 -0600 vm (6.40.1) unstable; urgency=low * Upgraded to standards version 2.4.0.0 * Updated FSF address. * This fixes all Lintian bugs. * New upstream version. Excerpted changes: * New variables: + vm-mime-7bit-composition-charset * don't grey-out "Decode MIME" toolbar button after a message is first decoded. Let user use the button to rotate through decoding states like the 'D' key does. This applies only to the separate MIME button, not the one that appears as part of the `helper' button. * vm-mark-or-unmark-messages-with-selector: removed extra count argument from `message' call. * vm-build-virtual-message-list: if dont-finalize is set, don't set up the location vector or to obarray used to suppress duplicate messages. In particular the latter causing empty message lists to be returned since all the messages were considered duplicates. * support foregroundToolBarColor symbol in toolbar pixmaps (XEmacs only). * vm-rfc1153-or-rfc934-burst-message: Use current buffer as folder buffer, instead of the buffer of specified message. * vm-get-new-mail: signal error if we fail to find a folder buffer through the normal means. * sleep for 2 seconds instead of 1 second after "consider M-x revert-buffer" message and after a quit is signaled and caught in vm-get-spooled-mail. -- Manoj Srivastava Mon, 9 Feb 1998 16:03:40 -0600 vm (6.39-1) unstable; urgency=low * New upstream version, with lots of changes VM 6.39 released (20 January 1998) * New commands: + vm-burst-digest-to-temp-folder + vm-add-existing-message-labels * vm-vs-header-or-text: vm-header-of -> vm-headers-of. * fixed reversed fset definition of vm-vs-sender. * don't grey-out "Decode MIME" menu entry after a message is first decoded. Let user use menu entry to rotate through decoding states like the 'D' key does. * vm-check-emacs-version: Disallow running under Emacs 20. * vm-mime-display-internal-multipart/digest: genereate summary if vm-startup-with-summary says so. Did the same for vm-mime-display-internal-message/partial and vm-mime-display-internal-message/rfc822. * default vm-temp-directory to (getenv "TMPDIR") if result is non-nil. * vm-undo: signal an error if the current folder is read-only. * vm-minibuffer-complete-word: set start of word to beginning of buffers if not doing a multi-word read. * vm-minibuffer-complete-word: if doing multi-word completion and the word before point exactly matches something in the completion list and the word also prefixes something else in the completion list and last-command eq vm-minibuffer-complete-word, insert a space, thereby letting the user complete the word. * vm-mime-display-internal-text/enriched: Don't assume (car errdata) is a string; it usually isn't. Format error data properly. * vm-print-message: write out the tempfile for the non-MIME lobe of the conditional in the code, since it is needed there also. * vm-read-virtual-selector: raise the selected frame before reading from the minibuffer, so the user is less likely to type into the wrong minibuffer window and hose themselves. * vm-mime-fsfemacs-encode-composition: set coding-system-for-read when inserting a file-based attachment to avoid MULE munging. Protect value of buffer-file-coding-system from possible changes by insert-file-contents. VM 6.38 released (15 January 1998) * add vm-virtual-selector-clause property to new selectors. * vm-read-virtual-selector: removed hard coded list of selectors that take an arument. Instead, read arg only for selectors that have a vm-virtual-selector-arg-type property. * fixed virtual folder numbering/infloop problem introduced in 6.37. * vm-mark-or-unmark-messages-with-virtual-folder: Mark virtual messages instead of the underlying real messages when current folder is a virtual folder. VM 6.37 released (29 December 1997) * Folders menu code: create directories by default in vm-folder-directory. * added name parameter to vm-create-virtual-folder for use by vm-create-virtual-folder-same-author and vm-create-virtual-folder-same-subject to avoid regexp-quote goop in the modeline. * make sure the -should-delete-frame variables in vm-mouse.el are initialized before use. * vm-apply-virtual-folder bound to V X. * added virtual folder selectors for all the attributes that vm-set-message-attributes accepts. Added un- selectors so that simple negations can be used with V C. Added header-or-text selector. Added aliases for some selector names. * New commands: + vm-toggle-all-marks (bound to M V). + vm-mark-matching-messages-with-virtual-folder (bound to M X). + vm-unmark-matching-messages-with-virtual-folder (bound to M x). * vm-update-summary-and-mode-line: copy value of default-directory from folder buffer to the summary and presentation buffers. * report null results in mark commands as "No message marked" instead of "0 messages marked". VM 6.36 released (19 December 1997) * vm-yank-message: commented out text/html code. * added toolbar initialization status message (XEmacs only). * allow integers in the vm-use-toolbar toolbar specification, which represent blank space in the toolbar. (XEmacs only). * allow for the possibility that lpr-command and lpr-switches are unbound. * restore binding of C-? ; binding the delete keysym doesn't affect the delete key on a dumb terminal when running FSF Emacs. * changed semantics of vm-temp-file-directory. Its value now must end with the directory separator character used by the local operating system. * vm-mime-display-internal-text/enriched: catch errors in enriched-decode and store it in the MIME layout struct for future display. * New commands: + vm-create-virtual-folder-same-subject (bound to V S) + vm-create-virtual-folder-same-author (bound to V A) * vm-write-file: If write-file renames the folder buffer, rename the summary buffer and presentation buffer to match. * vm-mime-can-display-internal: don't assume enriched.el is shipped with Emacs. Assume text/enriched is internally displayable only if enriched-mode is fbound. * vm-mime-fragment-composition: supply the "total" parameter in all message/partial parts instead of just the last one. * only delete the frame used for completion if VM created it. * vm-fsfemacs-p: Don't insist on v19. VM 6.35 released (24 November 1997) * typo fixes * Gregory Neil Shapiro's Emacs 20 MULE patches, which inserted bindings for coding-system-for-read/write in various places. * renamed vm-fsfemacs-19-p to vm-fsfemacs-p. * Bound (control /) to vm-undo, bound backspace and delete keysyms to vm-scroll-backward, dropped binding of "\C-?". * added ;;;###autoload cookies to all VM entry points. * vm-session-initialization: require 'vm first to make sure the basic things are loaded before we try to do anything. * dropped inline support for text/html. Too much pain right now. Revisit later. * recognize po:user type spool file and peaceably hand it off to movemail. * vm-mode-internal: install new fucntion vm-unblock-new-mail on after-save-hook to allow retrieval of mail after a save of an M-x recover-file'd folder. * vm-pop-make-session: first argument to buffer-disable-undo is required under XEmacs 19.14, so provide it. * Use locate-data-directory if it exists when setting vm-image-directory. * vm-mail-internal: insert an extra newline before the inserted signature so the user doesn't have to type one. (I give.) * vm-mime-transfer-encode-layout: don't add a Content-Transfer-Encoding header unless the encoding type of the layout differs from what we require it to be. * vm-mime-transfer-encode-region: downcase the return value so string comparisons don't have to worry about case. QP encode if armor-dot is set. * vm-print-message: use a tempfile under Windows 95 or NT. Apparently the losing print utils there don't understand stdin or can't read from it. * vm-mime-text-type-p renamed to vm-mime-text-type-layout-p. The new version of vm-mime-text-type-p checks the type without a layout wrapped around it. * vm-mime-xemacs-encode-composition: For MULE, use binary coding system when inserting an attached file if the type of the attachment is not a textual MIME type. -- Manoj Srivastava Thu, 22 Jan 1998 16:43:30 -0600 vm (6.34-2) unstable; urgency=low * Make sure the copyright file is not compressed. closes:Bug#14453,Bug#14468 -- Manoj Srivastava Wed, 5 Nov 1997 12:05:35 -0600 vm (6.34-1) unstable; urgency=low * New upstream version. Bug fixes. Changes: * vm: use other frame if folder is visible there. * vm-auto-archive-messages: don't silently block archival attempts to /dev/null; Emacs no longer complains about writes to /dev/null. * vm-toolbar-initialize: add line for 'getmail' button support that got omitted somehow. * vm-multiple-fonts-possible-p: added win32 as a window system that supports multiple fonts. -- Manoj Srivastava Tue, 16 Sep 1997 19:16:23 -0500 vm (6.33-2) unstable; urgency=low * Mentioned the /usr/doc/vm-vars.el.gz file, since the documentation is quite outdated. This fixes BUG#11998. * Got rid of the tar and uuencode directories since now dpkg-source can handle things correctly. * Have been using pristine sources, thought this should go on record. -- Manoj Srivastava Sun, 10 Aug 1997 18:28:08 -0500 vm (6.33-1) unstable; urgency=low * Chaned post installation script not to redirect input to a scratch file in /tmp (we use /tmp/emacs/file.new.$$ instead. This fixes BUG#11787. * New upstream bug fixing release. Excerpted changes: * vm-undisplay-buffer: don't delete frames unless both vm-mutable-windows and pop-up-frames are not non-nil. Loop over the remaining windows that display the target buffer and make those windows display some other buffer. * vm-mime-set-extent-glyph-for-type: use a list of instantiators, use 'xpm instead of 'autodetect and fallback to [nothing] if instantiation fails. * vm-display-face: use the [nothing] instantiator on ttys. XEmcas only. * vm-toolbar-install-toolbar: change toolbar size specifier on frame even if VM did not create the frame. This reverses the change made in 6.32. * vm-isearch: call vm-energize-urls to light up the URLs after a search completes. * vm-set-window-configuration: return the window configuration we set. A change in 6.32 caused this not to be done. This confused vm-display which relied on the return value to determine whether vm-display-buffer needed to be called. * don't recognize as an URL if it contains a newline. * vm-scroll-backwrd: make argument optional. -- Manoj Srivastava Fri, 1 Aug 1997 16:12:14 -0500 vm (6.32-1) unstable; urgency=low * This is the first version built with cvs-buildpackage. * Removed examples subdirectory from the debian directory, instead, the directory is now tarred, gzipped, and uuencoded, and it is imploded and exploded on the fly. * New upstream bug fixing release. Excerpted changes: * vm-toolbar-install-toolbar: don't change toolbar size specifier on frame unless VM created the frame. * vm-mail-send: move attribute change before possible deletion of the buffer due to vm-keep-sent-messages == nil. * remove references to vm-record-current-window-configuration since it is not being used and will never be used. * vm-mouse-read-file-name-event-handler: don't delete the completion frame before reading keyboard input. This should avoid making the user hunt for the frame that contains the correct minibuffer window to type into. * default value of vm-mutable-frames changed to t, and the semantics of this variable have been changed to hopefully be more like what users expect it to be. * use cache slot of MIME layout struct as an alist everywhere to avoid having display functions confuse each other with their different cache entries. * vm-mime-display-internal-image-xxxx: use device tag lists to have a text tag displayed on ttys and the image itself on image-capable devices. * added optional `to' argument to vm-mail commands. * mouse support changed so that it is installed whenever mouse support may be possible instead of only if it is possible on the current device.. Significant only under XEmacs currently. * use multiple frames on ttys, where available. * vm-scroll-forward: don't scroll if we're auto decoding MIME and the message needed to be decoded. * vm-mail-internal: support mail-personal-alias-file, fall back to ~/.mailrc if it is nil. -- Manoj Srivastava Tue, 3 Jun 1997 12:41:47 -0500 vm (6.31-1) unstable; urgency=low * New upstream bug fixing release. Excerpted changes: * vm-toolbar-support-possible-p: don't check device type, install toolbar if the 'toolbar feature is present. * vm-toolbar-initialize: check for device-on-window-system-p before looking at device-bitplanes, in case the selected device is a tty. * use '(win) tag sets on toolbar specifiers to prevent toolbars from being attached to non-window system frames. * vm-multiple-fonts-possible-p: conditionalize checks on XEmacs/Emacs to avoid looking at the window-system variable under XEmacs where it should not be used. * set scrollbar height only if (featurep 'scrollbar) and under XEmacs. Previously we checked if set-specifier was fbound. * vm-mime-preview-composition: copy value of enriched-mode to the temp buffer so that the MIME encoding code knows what to do. * set perms to 600 on MIME tempfiles before writing to them. There's still a race window where access can be gained to such files, but it should be very small assuming NFS is not involved. * added new 'display-error' slot to the MIME layout struct to avoid overloading the cache slot... and fixed a bug thereby, due to vm-mime-display-external-generic trying to use the contents of the cache slot when there was an error message there. * vm-mime-display-internal-message/rfc822: bind buffer-read-only to nil before trying to insert text into the presentation buffer. * vm-burst-digest will now descend into nested MIME layouts to find digests to burst. -- Manoj Srivastava Mon, 12 May 1997 18:26:44 -0501 vm (6.30-3) unstable; urgency=low * Added an el package a la Emacs (the elisp files are nearly 1M!), since I think it is imperative that the uncompiled elisp files be available for users, but it is not reasonable to unconditionally chew up 1M of disk space. * Also install vm-vars.el into the doc (for the old regular package) directory, since not all customizable variables are documented elsewhere. -- Manoj Srivastava Sat, 10 May 1997 22:29:42 -0501 vm (6.30-2) unstable; urgency=low * Added README.hilit19 * Added a menu entry for the HTML documentation -- Manoj Srivastava Thu, 8 May 1997 01:58:21 -0500 vm (6.30-1) unstable; urgency=medium * New upstream bug fixing release. Excerpted changes: * vm-mail-send: rename and/or delete the composition buffer before trying to make the replied/forward/etc. attribute change, since the user might abort that action. E.g. "... really edit the buffer?" * changed code to use XEmacs 20.2 MULE variables and functions instead of the 20.0 functions. * treat inlined message/rfc822 like multipart/mixed except we also insert the forwarded headers message and decode any encoded words in them. * support enriched-mode in composition buffers. * replaced some repeated calls to car with varrefs. * vm-make-presentation-copy: bind inhibit-read-only to disable read-only text properties before calling erase-buffer. * vm-rfc1153-or-rfc934-burst-message: don't insert a traling message separator if we're bursting the first message. * rewrote vm-menu-support-possible-p to not factor device type into it's decision. For a multi-device XEmacs what is not possible now might be possible later, so let the menus be instaited even if they aren't necessarily visible on the currently selected device. * default value of vm-honor-mime-content-disposition now nil. * disable the setting of stack-trace-on-error for now. * fixed a few places where MIME layout vectors were created with too many slots and one place with too few slots. * Makefile: doc fixes * Shapiro typo fixes. -- Manoj Srivastava Tue, 6 May 1997 16:24:08 -0500 vm (6.28-1) frozen unstable; urgency=medium * New bugfixing release. Vm has been in feature freeze for a while, and this release is quite stable (better than the 6.22 release available before). Excerpted changes: * added status messages for vm-mark-all-messages and vm-clear-all-marks. * vm-mime-set-extent-glyph-for-type: don't croak on unknown types. * vm-thread-mark-for-summary-update: when skipping already marked messages don't skip the part of the loop that moves the list pointer forward. :-P * rerun vm-menu-install-known-virtual-folders-menu after creating on-the-fly virtual folders because the folder menu gets hosed by the let-bound value of vm-virtual-folder-alist. * added hack to vm-mail-send-and-exit to try and imrpvoe window configuration behvavior under XEmacs when vm-keep-sent-messages is nil. * vm-mime-composite-type-p: don't consider message/partial and message/external-body as a composite types. * fixed nested MIME encoding to check types recursively all the way down to make sure the 7bit/8bit rules are followed. * vm-forward-message: use message/rfc822 instead of multipart/digest. * vm-send-digest: fixed preamble insert for MIME digests to insert into the composition buffer instead of directly into the digest buffer. * Added to postinst commands to remove obsolete references to vm in site-start.el files -- Manoj Srivastava Tue, 22 Apr 1997 01:46:16 -0500 vm (6.27-1) unstable; urgency=low * New upstream Source * excerpted changes: * vm-mime-rewrite-failed-button: add newline to displayed error string. * vm-menu-goto-event: use event-closest-point instead of event-point so that we get locality of point when a click occurs over a glyph (XEmacs only). * vm-mime-display-button-xxxx: say "attempt to display" instead of "display", as the button doesn't know if there is a functional display function for the type. * vm-mime-xemacs-encode-composition: dropped calls to encode-coding-region for now. They were screwing up marker positions. * vm-mime-xemacs-encode-composition: protect value of file-coding-system from changes when inserting attachment file contents. * vm-mime-display-internal-text/html: don't call w3-region if it isn't bound, just set error string and return nil. * vm-thread-mark-for-summary-update: don't mark if vm-thread-list-of slot is nil; use nil in this slot to mean we've already marked this message. * added missing application/octet-stream button display function. * Shapiro typo fixes * copied vm-note-emacs-version to vm-menu.el so that it is available at load time for use there. * converted mona stamps to XPMs as XEmacs can't display the GIF versions. * vm-mime-transfer-encode-layout: mark encoding in transfer encoded leaves, forgot this previously (oops). * default value of vm-mime-ignore-mime-version now t. * restored vm-xemacs-p, vm-xemacs-mule-p and vm-fsfemacs-19-p function to avoid breaking third party code that rely on them being present (sigh). * dropped vm-mime-attach-mime-file from the vm-mail-mode keymap and menu. * vm-show-list: binding to button release events in XEmacs didn't work. Should probably use mouse-track hooks instead of binding keys but until we do that go back to binding button press events. * vm-mouse-get-mouse-track-string: check whether we're running Emacs/XEmacs rather than whether functions are defined to avoid using the wrong overlay/extent interface. * initialize mail-default-reply-to from REPLYTO environmental variable if value is nil (used to be if value is t). * vm: moved call to vm-preview-current-message after the summary generatation/display code. The summary might completely obscure the view of the message buffer, so previewing should occur after that so that vm-show-current-message knows whether the message was visible and therefore also knows whether to mark the message as read. * vm-keep-mail-buffer: don't kill a buffer if it marked as modified, even if the number of `kept' messages would be exceeeded by keeping it. Presumably if a buffer is modified the user has resumed composing in it and so we should not delete it. * added vm-mouse-send-url-to-netscape-new-window and vm-mouse-send-url-to-mosaic-new-window functions for use as values of vm-url-browser. * dropped use of vm-check-for-killed-folder in menubar and toolbar enabled-p functions. We wrap troublesome calls to vm-select-folder-buffer in (condition-case ...) now to avoid a "Folder has been killed" error from hosing the toolbar/mnunebar and XEmacs permanently. * don't use application/octet-stream's button function for all application subtypes. Added a separate function to be used for subtypes other than octet-stream. * vm-mime-attach-object: if type is nil, use text/plain as the type when calling vm-mime-set-extent-glyph-for-type. * don't fold content-disposition headers if vm-mime-avoid-folding-content-type is non-nil. * don't add an extra newline after the unfolded content-type of the last text subpart. * vm-mime-preview-composition: remove mail header separator after the message is encoded since the encoder won't work without it. * default value of vm-mime-avoid-folding-content-type now t due to pervasive broken Solaris sendmail installations that mangle the headers of messages with folded Content- headers. * vm-mime-make-multipart-boundary: shortened multipart boundaries to avoid long header lines when vm-mime-avoid-folding-content-type is t. * include the missing audio_stamp images in the distribution. * set version variables at startup and refer to them rather than calling vm-xemacs-p, etc. repeatedly. * vm-summary-highlight-region: overlays and extents aren't interchangable in this context, so behave based on Emacs/XEmacs version to avoid any overlay/extent emulations, and also to avoid having make-overlay's sudden appearance give us heartburn. * don't fset vm-extent-property, vm-make-extent, etc. unless they are undefined. This is to avoid changing their definition in the middle of an Emacs session and thereby mixing usage the overlay/extent interfaces. * vm-mime-set-extent-glyph-for-layout: fixed reversed colorfulness test. * vm-mime-set-extent-glyph-for-type: mona_stamp is a GIF not an XPM. * more overlay/extent interface cleanup. * reenabled internal text/html code. * vm-yank-message: decode text/html and text/enriched in the composition buffer. * attach image glyphs to attachment tags in composition buffers (XEmacs only). * print a warning and continue if x-vm- header seems corrupted. old behavior was to just croak an error and wedge the mailer. * vm-print-message: default count to 1 if passed no arguments. * default value of vm-honor-mime-content-disposition now t. * Makefile: default VM build type is now back to `autoload'. * vm-rfc1153-or-rfc934-burst-message: use point instead of (match-end 0) when deleting the message separator. * vm-rfc1153-or-rfc934-burst-message: trim excessive newlines only after we know that we are looking at a valid message separator. * vm-su-message-id: discard chaff preceding message ID. * vm-mime-fragment-composition: 'send -> '8bit to match documentation of vm-mime-8bit-text-transfer-encoding. * vm-mime-fragment-composition: call vm-add-mail-mode-header-separator at the end so the buffer could be sent again. * vm-mime-preview-composition: call vm-remove-mail-mode-header-separator. * avoid starting new timers if old timers are still active (FSF Emacs only). * vm-mime-encode-composition: split code into FSF Emacs and XEmacs functions. This should avoid mixing usage of the extent and overlay interfaces, which loses with Nuspl's overlay.el emulation. * default vm-temp-file-directory to C:\ if /tmp is not a directory and C:\ is. * use insert-file-contents instead of insert-file-contents-literally when inserting MIME attachments into compositions when encoding. * if vm-auto-displayed-mime-content-types or Content-Disposition says to display message/rfc822 or message/news inline and immediately display them as text/plain. If displaying them due to button activation, use a folder instead. * use different menu for mailto: URLs since the old one didn't really do what it advertised, i.e. didn't allow mailto URLs to be send to other browsers. * added reduced color MIME art for 8-bit displays that used to only be used with displays with 16-bit or better displays. * cache MIME art image glyphs for reuse to save load time. * wrap calls to timezone-make-date-sortable in (condition-case ...) to avoid crashing on bad dates. * gave up on using frame-totally-visible-p since it is still broken in 19.15. -- Manoj Srivastava Thu, 17 Apr 1997 20:57:45 -0500 vm (6.22-1) unstable; urgency=low * New upstream bugfix release * Excerpted changes : * vm-save-folder: call clear-visited-file-modtime if folder was deleted to avoid "File changed on disk" warnings later. * vm-mime-qp-encode-region: bounds check (1+ inputpos) before using it to avoid referencing outside a clipping region. * vm-mime-encode-composition: do the insert/delete dance to avoid text leaking into overlays in the file insertion case. * vm-mime-encode-composition: insert-file-contents-literally doesn't move point. the code assumed it does and corrupted attachments as a result. * vm-gobble-crash-box: remove/rename crash box even if it is zero-length. -- Manoj Srivastava Mon, 24 Mar 1997 10:21:14 -0600 vm (6.20-1) unstable; urgency=low * BUG#7775 was already fixed in 6.18-2 * New upstream version * Excerpted changes : * vm-menu-support-possible-p: allow menu code to operate under NextStep. window-system == ns. * New variables: + vm-mosaic-program-switches + vm-netscape-program-switches + vm-mime-ignore-mime-version + vm-presentation-mode-hook (you were right, i was wrong) * vm-decode-mime-messages: run the highlighting code * vm-mime-display-internal-multipart/digest: copied folder display code from the message/rfc822 handler since they should work the same and message/rfc822 works properly with vm-mutable-windows == nil. * make gui-button-face be the unconditional default value for vm-mime-button-face. * vm-virtual-quit: make sure vm-message-pointer is non-nil before trying to run vm-message-id-number-of on it. * vm-howl-if-eom: don't search other frames for the buffer's window. Under XEmacs calling select-window on such a window causes its frame to be selected and it stays selected despite the call being wrapped in a save-window-excursion. I don't think we really want to report end of message status in a window in a non-selected frame anyway. * removed reference to user-mail-address variable, because it might be set to nil. * vm-show-list: bind command to mouse release events instead of mouse press events in XEmacs. * vm-preview-current-message: set vm-mime-decoded to nil; it is not enough to just let vm-make-presentation-copy do this. * use full contents of References headers to avoid * insert an X-Mailer in composition buffers. Music! Fun! Horoscopes! And bug tracking. * New user data functions: + vm-user-composition-folder-buffer + vm-user-composition-real-folder-buffers * vm-print-message: make printing of MIME message work more like non-MIME messages; print visible headers, print tags for non-textual body parts. * vm-mime-insert-button: don't set keymap parent to be the current local map unless that map exists (i.e. is non-nil). * catch errors when decoding encoded words and substitute an error indicator for the string that we could not parse. * vm-set-xxxx-flag: don't set attribute flag until after the undo information is recorded. The buffer modification might be nixed by the user via the clash detection query, so we need to be sure we're past that code before committing to the attribute change. * vm-set-labels: same as vm-set-xxxx-flag and for same reason. -- Manoj Srivastava Tue, 18 Mar 1997 15:03:24 -0600 vm (6.18-2) unstable; urgency=low * New maintainer -- Manoj Srivastava Fri, 7 Mar 1997 14:55:18 -0600 vm (6.18-1) unstable; urgency=low * Fixed dww heading * New version from upstream with lots of changes. * Excerpted changes : * New variables: + vm-mime-composition-armor-from-lines * use Dispose menu as the mode menu in the presentation buffer. * vm-mime-encode-composition: do insert/delete dance to avoid inserting into attachment overlays. * vm-print-command now decodes the MIME message before printing. * added 'print' item to mime dispose menu. * returned to using the day's date as part of the saved crash box name used when vm-keep-crash-boxes is set. * added support for message/news type, which is handled mostly like message/rfc822. * new mime-dispose menu entries. * don't check again for new mail if we already know some is waiting. * add extended status reporting during POP message retrieval. -- Manoj Srivastava Tue, 4 Mar 1997 10:02:57 -0600 vm (6.16-1) unstable; urgency=low * New upstream version, with bug fixes. * The most visible bug-fix is the undefined file-coding-system bug. -- Manoj Srivastava Tue, 25 Feb 1997 13:56:29 -0600 vm (6.15-1) unstable; urgency=low * New upstream bugfix release. Changes include: * move start of attachment tag out of header section. * vm-mime-preview-composition: don't copy extents under XEmacs. * use text properties for attachment tags in FSF Emacs. * vm-mime-attach-file: pass description from interactive spec into function. * better handling of M-x vm-mode w.r.t. coding systems under Mule. * Shapiro typo fixes. -- Manoj Srivastava Thu, 20 Feb 1997 11:36:39 -0600 vm (6.14-1) unstable; urgency=low * Made Richard Kettlewell the maintainer n the control file again * Added HTML files and an dwww index. * Since VM stopped supporting older Emacs versions, no longer need to install itimer. XEmacs ships it by default, and FSF Emacs has an different timer interface that VM knows how. * New upstream release. Many changes from previous version. -- Manoj Srivastava Wed, 19 Feb 1997 13:02:30 -0600 vm (6.13-2) unstable; urgency=low * Changed priority to optional, as per override file -- Manoj Srivastava Thu, 13 Feb 1997 14:19:55 -0600 vm (6.13-1) unstable; urgency=low * Changed postinst and prerm to just install and remove info files, as the new way of running elisp at startup is the dir /etc/emacs/site-start.d * Installed vm-init.el in the new /etc/emacs/site-start.d/ directory * Added error messages to source directory and root checks in debian/rules. * Give destination directories on command line, rather than edit upstream Makefile. * Non-maintainer upgrade to non-beta vm and new packaging conventions. Now upto Standards-Version: 2.1.2.2 -- Manoj Srivastava Tue, 11 Feb 1997 14:46:25 -0600 Wed Jan 17 00:13:10 1996 Richard Kettlewell * debian.rules: Cope with deleted package_revision field * debian.control: Delete package_revision field; better description field lifted from info documentation. Fri Sep 22 21:30:46 1995 Richard Kettlewell * debian.control: virtual package support * moved to version 5.95beta. This has been unchanged for weeks. * debian.rules (version): changed version number Sat Aug 12 00:19:23 1995 Richard Kettlewell * debian.site-lisp/vm-init.el: changed the name of this file. * debian.site-lisp/vm-init: added mail-mode-smart-tab as posted to info-vm. Wed Aug 9 19:58:31 1995 Richard Kettlewell * debian.{postinst,prerm}: hacked &followlink a bit; better error handling. * download 5.94beta from ftp.uu.net Tue Aug 1 22:45:03 1995 Richard Kettlewell * debian.vm-init: used to be vm-debian, changed it to bring in line with e.g. the w3-el package. * debian.README: fixed version number in pointer to upstream version. * debian.prerm: rewrote in perl, now we follow links properly * debian.postinst: rewrote in perl, now we follow links properly Fri Jul 28 18:52:35 1995 Richard Kettlewell * moved ChangeLog to debian.ChangeLog Wed Jul 26 18:21:18 1995 Richard Kettlewell * debian.control (Description): Removed package name from start of description field. Tue Jul 25 10:00:00 1995 Richard Kettlewell * Released vm-5.92beta-1 (time approximate) Sun Jul 23 22:31:12 1995 Richard Kettlewell * debian.rules: changed version number * patched up to 5.92beta Wed Jul 19 23:49:25 1995 Richard J Kettlewell * Makefile: changed directories to point to the right place for us. (clean): clean up things we don't want in the source package